SDS

SDS: E6011, E6013, E7014, E7018 USF
October 1, 2014
Page 6 of 8
SECTION 11: TOXICOLOGICAL INFORMATION
Welding fumes cannot be classified simply. The composition and quantity of both are dependent upon the metal being welded, the
process, procedure, and the electrode used. Other conditions which also influence the composition and quantity of the fumes and
gases to which workers may be exposed include: coatings on the metal being welded (such as paint, plating, or galvanizing), the
number of welders and the volume of the work area, the quality and the amount of ventilation, position of the welder's head with
respect to the fume plume, as well as the presence of contaminants in the atmosphere (such as chlorinated hydrocarbon vapors from
cleaning and degreasing activities). The International Agency for Research on Cancer has classified welding fumes as possibly
carcinogenic to humans (group 2B).
EFFECTS OF OVEREXPOSURE - Electric arc welding may create one or more of the following health hazards:
FUMES AND GASES can be dangerous to your health.
PRIMARY ROUTES OF ENTRY is the respiratory system. Other possible routes are eyes and/or skin contact.
PREEXISTING respiratory or allergic conditions may be aggravated in some individuals (i.e. asthma, emphysema).
SHORT TERM (ACUTE) OVEREXPOSURE to welding fumes may result in discomfort such as metal fume fever, dizziness,
nausea, or dryness or irritation of nose, throat, or eyes. PRIMARY ROUTE OF ENTRY is the respiratory system. IRON, IRON
OXIDE, MANGANESE - Remove from overexposure and apply artificial respiration if needed.
LONG TERM (CHRONIC) OVEREXPOSURE may lead to siderosis (iron deposits in lungs) and is believed by some
investigators to affect pulmonary functions. PRIMARY ROUTE OF ENTRY is the respiratory system. IRON, IRON
OXIDE - Long term overexposure to iron fumes can cause deposits of iron in the lungs (siderosis). Lungs will clear in time when
exposure to iron and its compounds cease. MANGANESE - Long term exposure may lead to "Manganism.” Central nervous
system is affected and symptoms include muscular weakness, impaired speech, impaired movement, and tremors. Exposed workers
should get quarterly medical examinations for manganism. Bronchitis and some lung fibrosis have been reported.
Monitor fume levels and do not exceed permissible limits.
SECTION 12: ECOLOGICAL INFORMATION
MATERIAL: Welding consumables and materials can degrade into the components used to manufacture the product. Avoid exposure to
conditions that could lead to accumulation in soils and groundwater.
CONTAMINATED PACKAGING: Empty containers should be taken for local recycling, recovery, or waste disposal. Metals may be
recycled.
SECTION 13: DISPOSAL CONSIDERATION
WASTE DISPOSAL METHOD: Dispose of any grinding dust and waste residues in accordance with EPA or local regulations.
Plastic materials, cardboard, and wire can be re-cycled.
U.S.A. RCRA: Some unused ingredients in this product may be considered “hazardous material” in other countries and they may
require special disposal methods. Contact your local municipality for the proper disposal method.
Residues from welding consumables and processes could degrade and accumulate in groundwater. Welding slag from these
products could typically contain the following components from the coating of the electrode: F Mn, F, Na, Si, and Ca.
SECTION 14: TRANSPORTATION INFORMATION
DOMESTIC TRANSPORT REGULATIONS (USA): DOT - not regulated.
DOMESTIC TRANSPORT REGULATIONS (CANADA): TDG - not regulated.
DOMESTIC TRANSPORT REGULATIONS (MEXICO): MEX - not regulated.