SDS
SDS: Problem Solver USF
October 1, 2014
Page 3 of 9
ADDITIONAL LABELING INFORMATION
As an article the product does not need to be labeled in accordance with EC-directives or respective national laws.
Metals in massive form, alloys, mixtures containing polymers and mixtures containing elastomers do not require a label according
to this Annex (Annex I GHS), if they do not present a hazard to human health by inhalation, ingestion or contact with skin or to the
aquatic environment in the form in which they are placed on the market, although classified as hazardous in accordance with the
criteria of this Annex. Instead, the supplier shall provide the information to downstream users or distributors by means of the SDS.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
IMPORTANT: This section covers the materials from which these products are manufactured. The fumes and gases produced
during normal use of these products are covered in Section 8. The chemicals or compounds subject to reporting under Title III, in
Section 313, of the Superfund Amendments and Reauthorization Act (SARA) are marked by the symbol #.
Exposure Limit (mg/m
3
)
INGREDIENTS
CAS NUMBER
OSHA PEL
ACGIH-TLV
Percent Ingredients (by weight)
Iron 7439-89-6 10 (as Fe) 5 (as Fe) 30 – 60
Chromium # 7440-47-3 1 0.5 15 – 40
Titanium Dioxide 13463-67-7 15 10 10 – 30
Nickel # 7440-02-0 1 0.2 7 – 13
Feldspar 68476-25-5 10 2 1 – 5
Calcium Carbonate 1317-65-3 5 10 1 – 5
Calcium Fluoride 7789-75-5 2.5 (as F) 2.5 (as F) 1 – 5
Sodium Silicate 1344-09-8 Not listed Not listed 1 – 5
Potassium Silicate 1312-76-1 Not listed Not listed 1 – 5
Lithium Aluminum Silicate (Al#) 12068-40-5 Not listed 5 (as Al fume) 1 – 5
Cobalt Aluminate Blue Spinel # 1345-16-0 0.1 (as Co) 0.02 (as Co) 0.1 – 1
Manganese # 7439-96-5 5 (ceiling) 0.1 0.1 – 1
Potassium Oxalate 6487-48-5 Not listed 5 0.5 – 1.5
Silicon Dioxide 14808-60-7 ** 0.05 0.1 – 1
** 10 mg/m³ / (% SiO
2
+ 2)
CAS / EINECS NUMBER / HAZARD CLASSIFICATION FOR ABOVE INGREDIENTS
INGREDIENTS
CAS NUMBER
EINECS NUMBER
Hazard Classification per
ECD 67/548/EEC
Iron 7439-89-6 231-096-4 No
Chromium # 7440-47-3 231-157-5 No
Titanium Dioxide 13463-67-7 236-675-5 No
Nickel # 7440-02-0 231-111-4 Carc. Cat. 3; R40 - T; R48/23 - R43
Feldspar 68476-25-5 270-666-7 No
Calcium Carbonate 1317-65-3 215-279-6 No
Calcium Fluoride 7789-75-5 232-188-7 No
Sodium Silicate 1344-09-8 215-687-4 No
Potassium Silicate 1312-76-1 215-199-1 No
Lithium Aluminum Silicate (Al#) 12068-40-5 235-098-6 No
Cobalt Aluminate Blue Spinel # 1345-16-0 310-193-6 No
Manganese # 7439-96-5 231-105-1 No
Potassium Oxalate 6487-48-5 209-506-8 No
Silicon Dioxide 14808-60-7 238-878-4 No
Exposure limits are subject to change. Contact ACGIH and OSHA for current values. See Section 16 for European Council
Directive 67/548/EEC R-phrases and S-phrases if applicable.