Specifications

HOSES &
LANCES
Copyright Jetstream of Houston, LLP © 2011
Effective 2/2011
Jetstream of Houston, LLP
Phone: US & Canada: 800-231-8192 or 832-590-1300
Web Site: www.waterblast.com
HOSES & LANCES
UP TO 15,000 PSI (1000 BAR)
D-8
STAINLESS STEEL BRAIDED
FLEX LANCES
END FITTINGS
NPT MALE
Hose
I.D.
Series Fitting
Length** (L)
Fitting O.D.
(D)
End Fitting
Connection*
in mm in mm
* See details on all connection types beginning on page I-2.
** Add length of nozzle to “L” dimension to determine total rigid length.
5/16" 25571 1/4" NPT Male 1.48 37.5 .721 18.31
1/4" 25570 1/8" NPT Male 1.25 31.8 .575 14.61
1/4" 25568 1/8" NPT Male 1.10 27.9 .500 12.70
1/8" 50559 1/16" NPT Male .97 24.7 .340 8.64
For use with female pipe threaded tube cleaning
nozzles (see pages E-19 to E-22 and E-24 to E-27).
MACHINE SCREW THREAD FEMALE
Hose
I.D.
Series Rigid
Length** (L)
Fitting O.D.
(D)
Nozzle
Type/
Size
End Fitting
Connection*
in mm in mm
* See details on all connection types beginning on page I-2.
** Combined length of nozzle and end fitting.
1/8" 51162 1/4" UNF Female 2.09 52.1 .325 8.26 MS2
For use with MS2 nozzles (see page E-28).
MINI-MOLE
MINI-MOLE NOZZLE FLOW
Hose
I.D.
Series Fitting
Length** (L)
Fitting O.D.
(D)
in mm in mm
1/8" 51498 .87 22.1 .335 8.51
• Special end fitting with permanently attached nozzle
• Provides the shortest possible rigid length at the
end of the lance to allow navigation through very
sharp bends
• One standard nozzle pattern available
• Two standard flow ratings available, one for each
flex lance length. See nozzle flow chart below.
• Contact a Jetstream sales representative for cus-
tom lengths, patterns or flow rates
Flow (gpm) at specified pressures (psi)
3,000 4,000 5,000 6,000 7,000 8,000 200 250 300 350 400 450 500 550
2.2 2.5 2.8 3.1 3.3 3.5 8.1 9.0 9.9 10.7 11.4 12.1 12.8 13.4
1.6 1.9 2.1 2.3 2.5 2.7 6.1 6.8 7.5 8.1 8.7 9.2 9.7 10.2
25'
50'
15.2
7.6
Flow (lpm) at specified pressures (bar)
Lance Length
ft m
MACHINE SCREW THREAD MALE
Hose
I.D.
Series Rigid
Length** (L)
Fitting O.D.
(D)
Nozzle
Type/
Size
End Fitting
Connection*
in mm in mm
* See details on all connection types beginning on page I-2.
** Combined length of nozzle and end fitting.
1/4" 50752 5/16" UNEF Male 1.34 34.04 .565 14.35 C2
1/4" 50673 5/16" UNEF Male 1.38 34.93 .500 12.70 C1
For use with Series C nozzles (see page E-29).