Specifications

TECHNICAL

Effective 2/2011

Jetstream of Houston, LLP

Phone: US & Canada: 800-231-8192 or 813-590-1300

Web Site: www.waterblast.com

I-3

TECHNICAL

UP TO 15,000 PSI (1000 BAR)

CONNECTION TYPES

PIPE THREADS (NPT) (continued)

•

Jetstream pipe threads are machined to a special specification to ensure

greater thread engagement for increased safety and to reduce the risk of

galling as noted on the previous page.

Actual Size

Reference Chart

(continued)

Pipe Thread Connection Instructions

1. Wrap Teflon

tape three or four times around

the male threads in a clockwise direction (if

looking at the face of the threaded end of the

part).

2. Brush on nickel- or silver-based thread lubricant

(anti-seize) over the Teflon.

3. Install male threaded component into female

threaded component and hand tighten.

4. Wrench tighten two turns past hand tight.