Specifications

NOZZLES
Copyright Jetstream of Houston, LLP © 2011
Effective 2/2011
Jetstream of Houston, LLP
Phone: US & Canada: 800-231-8192 or 832-590-1300
Web Site: www.waterblast.com
NOZZLES
UP TO 15,000 PSI (1000 BAR)
E-30
TUBE CLEANING NOZZLES
SERIES TP THRUSTERS
• Used in combination with Tube Spinners or other nozzles that
do not have rear jets to provide thrust for pulling through tubes
• Rear orifices recessed for protection from surface
abrasion or damage by wrenches
• Female pipe threads at inlet (NPT Fml) and male pipe threads
at outlet (NPT Male)
• Machined from heat-treated stainless steel
• Maximum working pressure: 15,000 psi (1000 bar)
• Four sizes, two standard patterns and thirteen flow ratings
• See page E-21 for flow ratings and ordering instructions
• Custom patterns available
PATTERNS
SIZES
Shown Actual Size
1
2
8 Back 30°
Min Flow #3
16 Back 30°
Min Flow #6
8 Back 30°
Min Flow #3
16 Back 30°
Min Flow #6
8 Back 30°
Min Flow #3
16 Back 30°
Min Flow #6
8 Back 30°
Min Flow #3
16 Back 30°
Min Flow #6
* See details on all connection types beginning on page I-2.
TP4 — 1/4" NPT Fml x 1/4" NPT Male
TP5 — 3/8" NPT Fml x 3/8" NPT Male
TP6 — 1/2" NPT Fml x 1/2" NPT Male
TP7 — 3/4" NPT Fml x 3/4" NPT Male
Diameter
1.370" (34.8 mm)
Length
2.40" (61.0 mm)
Length
2.03" (51.6 mm)
Diameter
1.040" (26.4 mm)
Length
1.65" (41.9 mm)
Diameter
.875" (22.2 mm)
Length
1.63" (41.4 mm)
Diameter
.665" (16.9 mm)
Inlet
3/4" NPT Fml
Outlet
1/2" NPT Male
Inlet
1/2" NPT Fml
Outlet
3/8" NPT Male
Inlet
3/8" NPT Fml
Outlet
1/4" NPT Male
Inlet
1/4" NPT Fml
Outlet
3/4" NPT Male