Specifications

NOZZLES
Copyright Jetstream of Houston, LLP © 2011
Effective 2/2011
Jetstream of Houston, LLP
Phone: US & Canada: 800-231-8192 or 832-590-1300
Web Site: www.waterblast.com
NOZZLES
UP TO 15,000 PSI (1000 BAR)
E-21
Nozzle Part Numbering
Use the part numbering instructions and flow chart on this
page for ordering tube nozzles from pages E-22 to E-30.
Example Part Number:
Flow (gpm) at specified pressures (psi) Flow (lpm) at specified pressures (bar)
Flow
Rate
2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 11,000 12,000 13,000 14,000 15,000 200 300 400 500 600 700 800 900 1000
1.2 1.5 1.7 1.9 2.1 2.3 2.4 2.6 2.7 2.9 3.0 3.1 3.2 3.3 5.5 6.8 7.8 8.8 9.6 10.4 11.1 11.8 12.4
1.5 1.8 2.1 2.4 2.6 2.8 3.0 3.2 3.3 3.5 3.7 3.8 4.0 4.1 6.8 8.3 9.6 10.7 11.7 12.7 13.5 14.4 15.1
1.8 2.2 2.6 2.9 3.2 3.4 3.7 3.9 4.1 4.3 4.5 4.7 4.8 5.0 8.3 10.2 11.7 13.1 14.4 15.5 16.6 17.6 18.6
2.6 3.1 3.6 4.0 4.4 4.8 5.1 5.4 5.7 6.0 6.3 6.5 6.8 7.0 11.6 14.2 16.4 18.4 20.1 21.7 23.2 24.6 26.0
3.3 4.1 4.7 5.2 5.7 6.2 6.6 7.0 7.4 7.8 8.1 8.4 8.7 9.1 15.0 18.4 21.2 23.7 26.0 28.1 30.0 31.8 33.5
3.8 4.7 5.4 6.0 6.6 7.1 7.6 8.1 8.5 8.9 9.3 9.7 10.1 10.4 17.2 21.1 24.4 27.2 29.8 32.2 34.5 36.6 38.5
4.1 5.1 5.9 6.6 7.2 7.8 8.3 8.8 9.3 9.7 10.2 10.6 11.0 11.4 18.8 23.0 26.6 29.7 32.6 35.2 37.6 39.9 42.1
4.5 5.5 6.4 7.1 7.8 8.4 9.0 9.6 10.1 10.6 11.1 11.5 11.9 12.4 20.5 25.1 28.9 32.3 35.4 38.3 40.9 43.4 45.7
5.2 6.3 7.3 8.1 8.9 9.6 10.3 10.9 11.5 12.1 12.6 13.1 13.6 14.1 23.4 28.6 33.0 36.9 40.4 43.7 46.7 49.5 52.2
5.6 6.8 7.9 8.8 9.6 10.4 11.1 11.8 12.4 13.0 13.6 14.2 14.7 15.2 25.2 30.8 35.6 39.8 43.6 47.1 50.4 53.4 56.3
6.7 8.2 9.5 10.6 11.6 12.5 13.4 14.2 15.0 15.7 16.4 17.1 17.7 18.4 30.4 37.2 43.0 48.1 52.7 56.9 60.8 64.5 68.0
7.3 9.0 10.4 11.6 12.7 13.7 14.6 15.5 16.4 17.2 17.9 18.7 19.4 20.1 33.2 40.7 47.0 52.5 57.5 62.1 66.4 70.4 74.2
10.2 12.5 14.5 16.2 17.7 19.2 20.5 21.7 22.9 24.0 25.1 26.1 27.1 28.1 46.4 56.9 65.7 73.4 80.4 86.9 92.9 98.5
104.0
13.2 16.2 18.7 20.9 22.9 24.7 26.5 28.1 29.6 31.0 32.4 33.7 35.0 36.2 60.0 73.5 84.8 94.8 104.0 112.0 120.0 127.0 134.0
2
3
4
5
6
7
8
9
10
12
14
15
20
40
FP 3 4 - 7
NOZZLE SERIES
FP EX MS
MP E C
FPC FPT TP
SIZE
From left column of nozzle
size and pattern charts
(Pages E-22 – E-30)
PATTERN
Specify number corresponding
to desired pattern from nozzle
size and pattern charts.
(Pages E-22 – E-30)
HYPHEN
FLOW RATING
Find the flow rate number
that most closely matches
the desired flow and pressure
from chart below. Example:
a flow rate number of 7 will
flow 6.6 gpm at 6,000 psi.
TUBE CLEANING NOZZLES
SERIES FP
TUBE CLEANING NOZZLES
SELECTION & PART NUMBERING
• For use with flex or rigid lances that have male pipe threads (NPT Male)
• Recessed orifices for protection from surface abrasion or damage by wrenches
• Double-tapered nose for fast, unrestricted travel through plugged tubes
• Machined from heat-treated stainless steel
• Maximum working pressure: 15,000 psi (1000 bar)
• Six sizes, seven standard patterns, and fourteen flow ratings
(see the following page)
• Custom patterns available
In the pattern and size
charts, each unique pattern
specifies the minimum flow
rate at which the nozzle is
available. Be certain that the
Flow Rate selected is equal
to or greater than the
specified minimum.