Specifications

ManualsBrandsUS Blaster ManualsAutomotiveUSB 4200

Summary of content (201 pages)

PAGE 1
PAGE 2
Your Waterblast Solutions Provider Worldwide, thousands of contractors, plants, municipalities, and the military turn to Jetstream for our comprehensive offering of industrial, high-pressure waterblast equipment, parts and accessories. These demanding customers keep coming back to Jetstream year after year for the superior performance of our products and the unmatched technical support and customer service available to them day and night.
PAGE 3
Table of Contents up to 15,000 PSI (1000 Bar) Hydro-Throttle: Electronic Throttle Control . . . . . C-17 High Pressure In-Line Filter . . . . . . . . . . . . . . . . C-18 Filters: Low Pressure . . . . . . . . . . . . . . . . . . . . . . C-19 A UNITS Diesel Waterblast Units . . . . . . . . . . . . . . . . . . . . A-1 Electric Waterblast Units . . . . . . . . . . . . . . . . . . . A-3 Custom Waterblast Units . . . . . . . . . . . . . . . . . . . A-5 Right Start Program . . . . . . . . . . . . . . . . .
PAGE 4
Table of Contents up to 15,000 PSI (1000 Bar) E NOZZLES — continued G SAFETY MS Tube Cleaning Nozzles . . . . . . . . . . . . . . . . . E-28 C Tube Cleaning Nozzles . . . . . . . . . . . . . . . . . . E-29 TP Thrusters Tube Cleaning Nozzles . . . . . . . . . E-30 Abrasive Injector Nozzle . . . . . . . . . . . . . . . . . . . E-31 Rupture Disc Holders . . . . . . . . . . . . . . . . . . . . . G-1 Severe Service Relief Valves . . . . . . . . . . . . . . . G-2 Safety Shrouds & Whip Hoses . . . . . . . .
PAGE 5
Units up to 15,000 PSI (1000 Bar) Jetstream diesel units, designed for maximum reliability and simplicity, are available in a wide selection of standard models with nearly limitless options for customization to suit specific needs.
PAGE 6
Units up to 15,000 PSI (1000 Bar) Performance Specifications Actual output may vary by engine model and configuration 5015Q Plunger Size 500 hp 373 kW Working Pressure 325 hp 242 kW 4215 3615 170 hp 127 kW 150 hp 112 kW 8,000 10,000 12 15,000 700 1000 Maximum gpm Flow lpm 98.0 79.1 50.6 371 299 192 Working Pressure psi 16 15 13 12 550 700 850 1000 Maximum gpm Flow lpm 62.9 50.4 40.2 32.
PAGE 7
units up to 15,000 PSI (1000 Bar) UNITS Electric Units Jetstream electric units, designed for maximum reliability and simplicity, are available in a wide selection of standard models. Standard Features • T op-of-the-line electric motors from 60 to 250 horsepower (45 to 186 kW) with 1.
PAGE 8
units up to 15,000 PSI (1000 Bar) Performance Specifications Plunger Size 4215 250 hp 186 kW Working Pressure 200 hp 149 kW Maximum gpm lpm Flow psi 3615 psi psi Working Pressure 15 13 15 13 psi bar Maximum gpm lpm Flow Working Pressure psi bar Maximum gpm lpm Flow Working Pressure psi bar Maximum gpm lpm Flow Plunger Size 60 hp 45 kW 15 13 12 11 12 11 Steerable Trailer 10 12 11 10 bar Plunger Size 75 hp 56 kW 12
PAGE 9
units up to 15,000 PSI (1000 Bar) In addition to a wide selection of standard units and options, close collaboration between Jetstream solutions providers and engineers provides almost unlimited options for customization to meet specific needs.
PAGE 10
pumps & fluid ends up to 15,000 PSI (1000 Bar) The UNx® advantage Features and Benefits PUMPS & FLUID ENDS Through nearly twenty years of service, the Jetstream UNx Fluid End has remained the most efficient, easy-to-use, and versatile waterblast tool available.
PAGE 11
pumps & fluid ends up to 15,000 PSI (1000 Bar) UNx® Fluid EndS PUMPS & FLUID ENDS AVAILABLE MODELS Jetstream UNITS • Choose from diesel or electric elect skid mount, 4-wheel steer• S able trailer, gooseneck trailer, or tandem trailer ee Section A for available • S models Jetstream BARESHAFT PUMPS Jetstream FLUID ENDS ustom built systems • C • Utilize existing engine and skid • S upplement an existing Jetstream UNx pump to increase range of available pressures.
PAGE 12
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® BARESHAFT PUMP MODEL 5015Q PUMPS & FLUID ENDS The Jetstream model 5015Q waterblast pump is capable of power input of up to 500 horsepower (373 kW). It is the most advanced and efficient high horsepower waterblast pump in the industry.
PAGE 13
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) PUMPS & FLUID ENDS UNx® BARESHAFT PUMP MODEL 5015Q Related Items 5015Q UNx FLUID ENDS — See page B-14 – B-15 SEVERE SERVICE RELIEF VALVES — See page G-2 BYPASS VALVES — See page C-13 REGULATOR VALVES — See page C-14 FILTERS — See page C-19 PRESSURE GAUGES — See page F-1 Jetstream of Houston, LLP Phone: US & Canada: 800-231-8192 or 813-590-1300 Web Site: www.waterblast.
PAGE 14
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® BARESHAFT PUMP MODEL 4215HF PUMPS & FLUID ENDS The Jetstream model 4215HF waterblast pump is capable of power input of up to 325 horsepower (242 kW). It is the most advanced and efficient waterblast pump of its size in the industry.
PAGE 15
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) PUMPS & FLUID ENDS UNx® BARESHAFT PUMP MODEL 4215HF Related Items 4215HF UNx FLUID ENDS — See page B-16 – B-19 SEVERE SERVICE RELIEF VALVES — See page G-2 BYPASS VALVES — See page C-13 REGULATOR VALVES — See page C-14 FILTERS — See page C-19 PRESSURE GAUGES — See page F-1 Jetstream of Houston, LLP Phone: US & Canada: 800-231-8192 or 813-590-1300 Web Site: www.waterblast.
PAGE 16
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® BARESHAFT PUMP MODEL 4215HF power end replacement PARTS PUMPS & FLUID ENDS For 4215HF UNx Fluid End Replacement Parts, see page B-18 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Part No. Description 26491 Capscrew 51536 Frame Cap, Outboard 26259 Shim, 0.02" Thick 26259-1 Shim, 0.01" Thick 26259-2 Shim, 0.0075" Thick 26259-3 Shim, 0.
PAGE 17
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) PUMPS & FLUID ENDS UNx® BARESHAFT PUMP MODEL 3615HF The Jetstream model 3615HF waterblast pump is capable of power input of up to 190 horsepower (142 kW). It is the most advanced and efficient medium horsepower waterblast pump in the industry.
PAGE 18
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® BARESHAFT PUMP MODEL 3615HF PUMPS & FLUID ENDS Related Items 3615HF UNx FLUID ENDS — See page B-16 – B-19 SEVERE SERVICE RELIEF VALVES — See page G-2 BYPASS VALVES — See page C-13 REGULATOR VALVES — See page C-14 FILTERS — See page C-19 PRESSURE GAUGES — See page F-1 Jetstream of Houston, LLP Phone: US & Canada: 800-231-8192 or 813-590-1300 Web Site: www.waterblast.
PAGE 19
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® BARESHAFT PUMP MODEL 3615HF PUMPS & FLUID ENDS power end replacement PARTS For 3615HF UNx Fluid End Replacement Parts, see page B-18 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Part No. Description 26491 Capscrew 51536 Frame Cap, Outboard 26259 Shim, 0.02" Thick 26259-1 Shim, 0.01" Thick 26259-2 Shim, 0.0075" Thick 26259-3 Shim, 0.
PAGE 20
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® BARESHAFT PUMP MODEL 3015 PUMPS & FLUID ENDS The Jetstream model 3015 waterblast pump is capable of power input of up to 150 horsepower (112 kW). It is the most advanced and efficient compact waterblast pump in the industry.
PAGE 21
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) PUMPS & FLUID ENDS UNx® BARESHAFT PUMP MODEL 3015 Related Items 3015 UNx FLUID ENDS — See page B-20 – B-21 SEVERE SERVICE RELIEF VALVES — See page G-2 BYPASS VALVES — See page C-13 REGULATOR VALVES — See page C-14 FILTERS — See page C-19 PRESSURE GAUGES — See page F-1 Jetstream of Houston, LLP Phone: US & Canada: 800-231-8192 or 813-590-1300 Web Site: www.waterblast.
PAGE 22
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® BARESHAFT PUMP MODEL 3015 power end replacement PARTS PUMPS & FLUID ENDS For 3015 UNx Fluid End Replacement Parts, see page B-21 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Part No. Description 26491 Capscrew 51733 Frame Cap, Outboard 26495 Shim, 0.02" Thick 26495-1 Shim, 0.01" Thick 26495-2 Shim, 0.0075" Thick 26495-3 Shim, 0.
PAGE 23
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End MODEL 5015Q PUMPS & FLUID ENDS The UNx Fluid End is a cost-effective solution to increase the available operating pressure or range of pressures of an existing Jetstream 5000Q UNx Pump. Model 5015Q fluid ends deliver all of the benefits that define UNx Fluid Ends as the best in the industry. 500 horsepower (373 kW) • low: 50.6 gpm (192 lpm) at 15,000 psi (1000 bar) • F • Bolt-on addition to 5000Q pumps 77.
PAGE 24
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End MODEL 5015Q replacement PARTS PUMPS & FLUID ENDS For pump discharge fittings, see page F-15 Item 1 2 3 4 5* Part No.
PAGE 25
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End MODELs 4215HF & 3615HF 50 to 325 horsepower (112 to 242 kW) • 1 uperior performance • S • Greater flexibility in the field • Reduced downtime and maintenance ee UNx Features and Benefits on page B-1 • S • I ncludes hose adapters and one rupture disc holder hoose an additional rupture disc holder or a Severe • C Service Relief Valve as a second safety device ressure gauge and burst discs not included • P PUMPS & FLUID ENDS
PAGE 26
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End MODELs 4215HF & 3615HF PUMPS & FLUID ENDS 3615HF Fluid Ends Plunger Size Fluid End Part No. Diameter No. in mm 150 RPM 200 RPM 300 RPM 400 RPM 500 RPM 53085 Flow at Specified Pump Speeds** Max. Flow / Pressure Flow** Pressure gpm lpm gpm lpm gpm lpm gpm lpm hp kW gpm lpm psi bar .900 22.86 4.5 17 6.0 23 8.9 34 11.9 45 14.9 56 150 112 15.5 59 15,000 1000 53090 #10 .980 24.89 5.3 20 7.1 27 10.6 40 14.
PAGE 27
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End MODELS 4215HF & 3615HF PUMPS & FLUID ENDS replacement PARTS NOTE: Parts listed on this page are components of current 4215HF & 3615HF fluid end models. For first generation fluid end models which utilize different stuffing boxes, valves and manifold, see the following page. “HF” and first generation models can be most easily distinguished by the part number stamped on the top face of the fluid end manifold.
PAGE 28
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End MODELS 4215 & 3615 (GEN 1) replacement PARTS PUMPS & FLUID ENDS NOTE: Parts listed on this page are components of first generation 4215 & 3615 fluid end models no longer sold. These models utilize different stuffing boxes, valves and manifold than the current “HF” design. “HF” and first generation models can be most easily distinguished by the part number stamped on the top face of the fluid end manifold.
PAGE 29
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End MODEL 3015 p to 150 horsepower • U ide range of flow and pressure combinations • W • Three plunger (triplex) design • Superior performance reater flexibility in the field • G educed downtime and maintenance • R See UNx Features and Benefits on page B-1 • • Includes hose adapters and one rupture disc holder • Choose an additional rupture disc holder PUMPS & FLUID ENDS The UNx Fluid End is a cost-effective solution
PAGE 30
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End MODELS 3015 replacement PARTS PUMPS & FLUID ENDS Item 1* 2* 3 4 5 6 Part No. Description 26623 Deflector 51737 Plunger Coupling 51831 #7 Plunger 51741 #8 Plunger 51742 #9 Plunger 51743 #10 Plunger 52229 #11 Plunger 51617 #7 Gland Nut 51619 #8 Gland Nut 51621 #9 Gland Nut 51623 #10 Gland Nut 52231 #11 Gland Nut 26416 O-Ring 51689 #7 Packing Set Item 6 7 8 8a 8b 8c 8d 8e Part No.
PAGE 31
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 4215N PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 32
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 4215N replacement PARTS PUMPS & FLUID ENDS NOTE: Parts listed on this page are for current 4215N fluid end models. For first generation fluid end models, which utilize different stuffing boxes, valves, and manifold, see the following page. Models can be most easily distinguished by the part number stamped on the top face of the fluid end manifold.
PAGE 33
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 4215N (GEN 1) PUMPS & FLUID ENDS replacement PARTS NOTE: Parts listed on this page are for first generation 4215N fluid end models no longer sold. These models utilize different stuffing boxes, valves, and manifold than the current design. Models can be most easily distinguished by the part number stamped on the top face of the fluid end manifold.
PAGE 34
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 4215QN PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 35
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 4215QN PUMPS & FLUID ENDS replacement PARTS Item 1 2 3 4 5 6 Part No.
PAGE 36
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 3015N PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 37
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 3015N PUMPS & FLUID ENDS replacement PARTS Item 1 2 3 4 Part No.
PAGE 38
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 4515B PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 39
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 4515B PUMPS & FLUID ENDS replacement PARTS NOTE: Parts listed on this page are for current 4515B fluid end models. For first generation fluid end models, which utilize different stuffing boxes, valves, and manifold, see the following page. Models can be most easily distinguished by the part number stamped on the top face of the fluid end manifold.
PAGE 40
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 4515B (gen 1) replacement PARTS PUMPS & FLUID ENDS NOTE: Parts listed on this page are for first generation 4515B fluid end models no longer sold. These models utilize different stuffing boxes, valves, and manifold than the current design. Models can be most easily distinguished by the part number stamped on the top face of the fluid end manifold.
PAGE 41
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 4015B PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 42
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 4015B replacement PARTS PUMPS & FLUID ENDS Item 1 2 3 4 5 6 Part No.
PAGE 43
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 3715B PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 44
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 3715B replacement PARTS PUMPS & FLUID ENDS Item 1 2 3 4 5 6 Part No.
PAGE 45
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 3015B PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 46
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 3015B replacement PARTS PUMPS & FLUID ENDS Item 1 2 3 4 Part No.
PAGE 47
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 3715W PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 48
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 3715W replacement PARTS PUMPS & FLUID ENDS NOTE: Parts listed on this page are for current 3715W fluid end models. For first generation fluid end models, which utilize different stuffing boxes, plungers, manifold, and adapter plate, see the following page. Models can be most easily distinguished by the part number stamped on the top face of the fluid end manifold.
PAGE 49
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 3715W (gen 1) PUMPS & FLUID ENDS replacement PARTS NOTE: Parts listed on this page are for first generation 3715W fluid end models no longer sold. These models utilize different stuffing boxes, plungers, manifold, and adapter plate than the current design. Models can be most easily distinguished by the part number stamped on the top face of the fluid end manifold.
PAGE 50
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 3715WZ PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 51
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 3715WZ PUMPS & FLUID ENDS replacement PARTS Item 1 2 3 4 5 6 Part No.
PAGE 52
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 3515Q PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 53
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 3515Q PUMPS & FLUID ENDS replacement PARTS Item 1 2 3 4 5 6 7 Part No.
PAGE 54
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 3115T PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 55
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 3115T PUMPS & FLUID ENDS replacement PARTS Item 1 2 3 4 5 6 7 Part No.
PAGE 56
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 3015W PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 57
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 3015W PUMPS & FLUID ENDS replacement PARTS Item 1 2 3 4 Part No.
PAGE 58
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 3015Q PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 59
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 3015Q PUMPS & FLUID ENDS replacement PARTS Item 1 2 3 4 Part No.
PAGE 60
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades model 5015G PUMPS & FLUID ENDS The Jetstream UNx Fluid End Upgrade is ideal for replacing a damaged, costly, or unreliable fluid end. It is also a cost-effective solution to increase the available operating pressure or range of pressures for those who have already converted to the UNx. The upgrade delivers all of the benefits of the UNx Fluid End design.
PAGE 61
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Model 5015G PUMPS & FLUID ENDS replacement PARTS Item 1 2 3 4 5 6 7 8 Part No. Description 52092 #15 Plunger 50378 #17 Plunger 52121 #15 Gland Nut 52122 #17 Gland Nut 26734 O-ring 52111 #15 Packing Set 52112 #17 Packing Set 26836 Adapter Plate Bolt 52104 Washer 52098 Adapter Plate 52099 Stuffing Box Jetstream of Houston, LLP Phone: US & Canada: 800-231-8192 or 813-590-1300 Web Site: www.waterblast.
PAGE 62
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Spare Parts Packages PUMPS & FLUID ENDS A must-have for field repairs, these packages include all major fluid end replacement packaged together for easy transport and storage.
PAGE 63
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) UNx® Fluid End Upgrades Plunger Packages • Quick and cost-effective conversions for jobs that • Available for any model UNx fluid end require higher flow at lower pressure or higher pressure at lower flow • B urst discs for new working pressure not included. See page G-1 for ordering information.
PAGE 64
PUMPS & FLUID ENDS up to 15,000 PSI (1000 Bar) Tools PUMPS & FLUID ENDS Pump Wrenches Manifold Mounting Studs The only special tool needed to work on a Jetstream UNx pump Part No.
PAGE 65
guns, valves & Filters up to 15,000 PSI (1000 Bar) DURASAFE™ hand GUNS GUNS, VALVES & FILTERS Dump Style DCP-15 Part No. 53300 DCPx-15 Part No. 54605 DCP-15DD DCPx-15DD Part No. 53225 Part No. 54415 DuraSafe 15,000 psi hand-operated dump style control guns allow the operator to have complete control of the pressure at all times. Designed with safety, comfort, and simplicity in mind, they are used for a variety of surface cleaning applications and are available in four standard configurations.
PAGE 66
guns, valves & Filters up to 15,000 PSI (1000 Bar) DURASAFE™ hand GUNS Dump Style Replacement Parts GUNS, VALVES & FILTERS Item 1 2 2a 2b 2c 3 4 5 Part No. Item Description 26061 Coupling 55480 Handle Assembly 55481 Handle J55617 Trigger Assembly 26116 Pin 26689 Capscrew 25193 O-Ring 53270 DCP-15 Body Assembly 54360 DCPx-15 Body Assembly 53240 DCP-15DD Body Assembly 54420 DCPx-15DD Body Assembly 6 7 8 9 10 11 12 13 Part No.
PAGE 67
guns, valves & Filters up to 15,000 PSI (1000 Bar) DURASAFE™ HAND GUNS SHUT-IN STYLE • S hut-in style control guns do not dump water when the trigger is released. Useful in applications where excess water spillage and disposal are concerns. Use with plunger style pumps such as the UNx® requires the installation of a Shut-In Regulator Valve (see page C-14).
PAGE 68
guns, valves & Filters up to 15,000 PSI (1000 Bar) DURASAFE™ HAND GUNS SHUT-IN STYLE REPLACEMENT PARTS GUNS, VALVES & FILTERS Item 1 2 2a 2b 2c 3 4 Part No. 26061 J55620 J55614 J55617 26116 26689 52645 54450 Item Description Coupling Handle Assembly Handle Trigger Assembly Pin Capscrew DCPSi-15 Body Assembly DCPxSi-15 Body Assembly 5 6 7 8 9 10 11 Part No.
PAGE 69
guns, valves & Filters up to 15,000 PSI (1000 Bar) DURASAFE™ HAND GUNS ELECTRIC DUMP STYLE • E lectric control guns are designed for units that utilize electric solenoidoperated throttle controls, popular in a handful of older waterblaster models • 3 0-second field replaceable cartridge design for minimal downtime GUNS, VALVES & FILTERS DuraSafe 15,000 psi electric hand-operated dump style control guns allow the operator to have complete control of the pressure at all times.
PAGE 70
guns, valves & Filters up to 15,000 PSI (1000 Bar) DURASAFE™ HAND GUNS ELECTRIC DUMP STYLE REPLACEMENT PARTS GUNS, VALVES & FILTERS Item 1 2 2a 2b 2c 3 4 5 Part No. Item Description 26061 Coupling J55685 Primary Handle Assembly (Both Models) 55480 Secondary Handle Assembly (DCPe-15DD only) J55682 Primary Handle (Both Models) 55481 Secondary Handle (DCPe-15DD only) J55617 Trigger Assembly 26116 Pin 26689 Capscrew 26126 Capscrew 25193 O-Ring 6 7 8 9 10 11 12 13 Part No.
PAGE 71
guns, valves & Filters up to 15,000 PSI (1000 Bar) DURASAFE™ FOOT GUNS DUMP STYLE Ideal for a variety of waterblast tube cleaning applications, the DuraSafe family of foot-operated dump style control guns allow the operator to have complete control of the pressure at all times. DCF-15-1/2" • 3 0-second field replaceable cartridge design for minimal downtime Part No.
PAGE 72
guns, valves & Filters up to 15,000 PSI (1000 Bar) DURASAFE™ FOOT GUNS SHUT-IN STYLE Ideal for a variety of waterblast tube cleaning applications, the DCFSi-15 DuraSafe foot-operated shut-in style control gun allows the operator to have complete control of the pressure at all times. GUNS, VALVES & FILTERS • S hut-in style control guns do not dump water when the trigger is released. Useful in applications where excess water spillage and disposal are concerns.
PAGE 73
guns, valves & Filters up to 15,000 PSI (1000 Bar) AIR-OPERATED DIVERTER VALVEs 1/2" Valves Part No. 53440 The Air-Operated Diverter Valve allows an operator to remotely control pressure in cleaning applications up to 15,000 psi. When air is sent to the cylinder, the valve closes and allows the system to build pressure. The valve opens when the air is exhausted, reducing system pressure to near atmospheric. • 30-second field replaceable cartridge design for minimal downtime Part No.
PAGE 74
guns, valves & Filters up to 15,000 PSI (1000 Bar) AIR-OPERATED DIVERTER VALVEs shut-in STYLE GUNS, VALVES & FILTERS Shut-In, Air-Operated Diverter Valves allow an operator to remotely control pressure in cleaning applications up to 15,000 psi. When air is sent to the cylinder, the valve opens to allow water to the nozzle. The valve closes when the air is exhausted, preventing water from reaching the nozzle while maintaining system pressure.
PAGE 75
guns, valves & Filters up to 15,000 PSI (1,000 Bar) MULTI-GUN VALVE (MGV) • S etup using two hand adjustment dials is fast and simple • Utilizes two valve cartridges that can be easily replaced to completely repair the valve in the field in only three minutes REPLACEMENT CARTRIDGE • All pressure-bearing components are stainless steel • Zinc-plated base for corrosion resistance • Pipe threaded (NPT) inlet and outlet connections • A dditional Multi-Gun Valves can be added to a system to furth
PAGE 76
guns, valves & Filters up to 15,000 PSI (1000 Bar) Multi-unit manifolds • Combine flow of two waterblast units • Two sizes available • B uilt-in bypass valve and pressure gauge for centralized, remote pressure control • A ll pressure-bearing components are stainless steel GUNS, VALVES & FILTERS • Zinc-plated base for corrosion resistance • P ipe threaded (NPT) inlet and outlet connections Part No.
PAGE 77
guns, valves & Filters up to 15,000 PSI (1000 Bar) BYPASS VALVEs HAND ADJUSTABLE GUNS, VALVES & FILTERS A bypass valve diverts a portion of pump flow to a lowpressure outlet and is used on diesel and electric units. For diesel engines, it is used to prevent bogging the engine when using flows at the low end of the pump’s capability. A bypass valve is required on electric units due to the non-adjustability of motor speed.
PAGE 78
guns, valves & Filters up to 15,000 PSI (1000 Bar) SHUT-IN REGULATOR VALVES HAND ADJUSTABLE GUNS, VALVES & FILTERS Required for use with shut-in systems on plunger pumps, the regulator valve maintains constant system pressure when operating one or more shut-in guns from a single pump. When a gun is disengaged, the regulator automatically adjusts to shift the excess flow to a low pressure outlet while maintaining system pressure.
PAGE 79
guns, valves & Filters up to 15,000 PSI (1000 Bar) NOZZLE SHUT-OFF VALVE NSOV The Nozzle Shut-Off Valve (NSOV) is designed for use with dump style foot guns. The Nozzle Shut Off Valve completely stops all water flow to the cleaning nozzle in a waterblast operation while the foot valve is in its dump mode.
PAGE 80
guns, valves & Filters up to 15,000 PSI (1000 Bar) HYDRO-THROTTLE mechanical Throttle Control GUNS, VALVES & FILTERS The Jetstream Mechanical Hydro-Throttle enables the operator to reduce the engine to idle speed and relieve the system of high pressure when the gun trigger is released — saving water and fuel and reducing wear on the engine and pump. When the gun is again engaged, the Hydro-Throttle increases the engine speed until the pump again reaches the set operating pressure.
PAGE 81
guns, valves & Filters up to 15,000 PSI (1000 Bar) HYDRO-THROTTLE electronic Throttle Control GUNS, VALVES & FILTERS The Jetstream Electronic Hydro-Throttle enables the operator to reduce the engine to idle speed and relieve the system of high pressure when the gun trigger is released — saving water and fuel and reducing wear on the engine and pump. When the gun is again engaged, the Hydro-Throttle senses the change in pressure and increases the engine speed to the previous set point.
PAGE 82
guns, valves & Filters up to 15,000 PSI (1000 Bar) HIGH PRESSURE IN-LINE FILTER GUNS, VALVES & FILTERS The High Pressure In-Line Water Filter is designed and built for durability and ease of use. It allows water to be filtered after the pump, providing maximum protection for control valves, spin nozzles, and other equipment that can be damaged by large particles in water.
PAGE 83
guns, valves & Filters up to 15,000 PSI (1000 Bar) FILTERS low pressure Provide critical protection to waterblast systems by extending valve life, preventing overpressurization caused by plugged nozzles, and protecting other system components from damage by large particles in water supply.
PAGE 84
Hoses & Lances up to 15,000 PSI (1000 Bar) RUBBER WATERBLAST HOSES These high pressure hose assemblies combine rugged construction, dependability and safe performance.
PAGE 85
Hoses & Lances up to 15,000 PSI (1000 Bar) rubber waterblast hoses custom order Use the information on this page to build part numbers for custom rubber hoses using the part numbering system described on the previous page. Hose Series Series Maximum Working Pressure* Minimum Burst Pressure* Bend Radius Weight in mm psi bar psi bar in mm lb/ft kg/m 1" 25 53235 10,000 700 25,000 1750 13.4 340 1.94 2.89 1/2" 13 52241 15,000 1000 37,500 2500 9.0 230 .76 1.
PAGE 86
Hoses & Lances up to 15,000 PSI (1000 Bar) THERMOPLASTIC HOSES These premium hoses provide the most durable and reliable means of connecting system components.
PAGE 87
Hoses & Lances up to 15,000 PSI (1000 Bar) thermoplastic FLEX LANCES Flex lances are uncovered hoses used for the cleaning of small diameter tubes such as those found in heat exchangers, condensers and boilers.
PAGE 88
Hoses & Lances up to 15,000 PSI (1000 Bar) THERMOPLASTIC HOSES & FLEX LANCES CUSTOM ORDER Thermoplastic hoses and flex lances are available in custom lengths or with special end fitting combinations or covers. Common lengths and configurations are available on the two preceding pages.
PAGE 89
Hoses & Lances up to 15,000 PSI (1000 Bar) THERMOPLASTIC HOSES & FLEX LANCES type m FEmale Hose Series I.D. Use the information on this page to select the connections desired for custom thermoplastic hoses and flex lances. in mm End Fittings MALE PIPE THREADS (NPT Male) Hose I.D.
PAGE 90
Hoses & Lances up to 15,000 PSI (1000 Bar) stainless steel braided flex lances • Abrasion resistant, braided stainless steel cover • Teflon® core ensures minimal pressure loss • S mall minimum bend radius allows easy passage through elbows, U-tubes and other sharp bends • Stainless steel braid-anchored end fittings • See pages D-15 – D-16 for pressure drop graphs • Available in 25' and 50' lengths (7.6 m and 15.
PAGE 91
Hoses & Lances up to 15,000 PSI (1000 Bar) stainless steel braided flex lances END FITTINGS Fitting Hose Series End Fitting Connection* Length** (L) I.D. 5/16" 1/4" 1/4" 1/8" in 25571 1/4" NPT Male 25570 1/8" NPT Male 25568 1/8" NPT Male 50559 1/16" NPT Male in 37.5 1.25 .721 31.8 1.10 .575 27.9 .97 Rigid Fitting O.D. Nozzle Hose Series End Fitting Type/ (D) Connection* Length** (L) I.D. Size in mm in mm Fitting O.D. (D) mm 1.
PAGE 92
Hoses & Lances up to 15,000 PSI (1000 Bar) STEELFLEX™ LANCES • S mallest outside diameters of any commercially available lances • S pecial spring temper stainless steel can be used as either flex or rigid lance in very small tubes • Integral nozzle and inlet fitting • H igh strength material permits large inside to outside diameter • U nlike normal rigid lances, the flexibility of SteelFlex permits use in confined space applications • Two sizes available in lengths up to 50 ft (15 m) HOSES & LAN
PAGE 93
Hoses & Lances up to 15,000 PSI (1000 Bar) rigid LANCES • For use in manual or automatic tube cleaning applications • T o order, use five digit part number followed by a dash (-) and length in feet (up to 25 ft) • Available in a range of sizes and connections • See pages D-16 – D-18 for pressure drop graphs Part No.
PAGE 94
Hoses & Lances up to 15,000 PSI (1000 Bar) rigid LANCES NPT MALE x MACHINE SCREW THREAD FEMALE For use with Series MS nozzles (see page E-28). Part No. Connection Type* XX = length (ft) Inlet End HOSES & LANCES 54411-XX 1/8" NPT Male Nozzle End Outside Diameter Inside Diameter in mm in mm 10.29 .215 5.46 5/16" UNF Female .405 Material Stainless Steel Maximum Operating Nozzle Pressure Type/ Size psi bar 10,000 700 MS3 * See details on all connection types beginning on page I-2.
PAGE 95
Hoses & Lances up to 15,000 PSI (1000 Bar) pressure drop data 1" RUBBER WATERBLAST HOSE Series 53235 1000 200' 800 Pressure Drop (psi) PRESSURE DROP & NOZZLE SIZING Pressure drop is especially important to understand when sizing nozzles. Use the following procedure for correct nozzle sizing: 1. Determine the pressure needed for a particular cleaning operation and subtract that amount from the desired pump operating pressure. The result is the permissible pressure drop. 2.
PAGE 96
Hoses & Lances up to 15,000 PSI (1000 Bar) pressure drop data 3/8" RUBBER WATERBLAST HOSE Series 25576 & 52178 1/4" RUBBER WATERBLAST HOSE Series 25914 8000 8000 100' 50' 7000 7000 100' 25' Pressure Drop (psi) 6000 5000 4000 3000 25' 5000 4000 3000 2000 2000 1000 1000 0 0 0 10 20 30 40 50 60 70 80 0 5 10 Flow Rate (gpm) 15 20 25 30 Flow Rate (gpm) 3/4" (20 mm) THERMOPLASTIC HOSE & FLEX LANCE Series 29313 1/2" (13 mm) THERMOPLASTIC HOSE & FLEX LANCE Series 28481 & 2852
PAGE 97
Hoses & Lances up to 15,000 PSI (1000 Bar) pressure drop data 5/16" (8 mm) THERMOPLASTIC HOSE & FLEX LANCE Series 27560 & 28673 1/4" (6 mm) THERMOPLASTIC HOSE & FLEX LANCE Series 26108 & 28490 8000 8000 100' 50' 7000 7000 25' 4000 3000 25' 5000 4000 HOSES & LANCES 5000 3000 2000 2000 1000 1000 0 0 0 10 20 30 40 0 50 5 10 15 20 25 30 Flow Rate (gpm) Flow Rate (gpm) 3/16" (5 mm) THERMOPLASTIC HOSE & FLEX LANCE Series 26106 5/32" (4 mm) THERMOPLASTIC HOSE & FLEX LANCE Series 26
PAGE 98
Hoses & Lances up to 15,000 PSI (1000 Bar) pressure drop data 1/8" (3 mm) THERMOPLASTIC HOSE & FLEX LANCE Series 28596 5/16" STAINLESS STEEL BRAIDED FLEX LANCE Series 25571 6000 8000 100' 7000 50' 50' 25' 25' 5000 Pressure Drop (psi) 5000 4000 3000 4000 3000 2000 2000 1000 1000 0 0 0 1 2 3 4 5 0 6 10 20 30 40 Flow Rate (gpm) Flow Rate (gpm) 1/4" STAINLESS STEEL BRAIDED FLEX LANCE Series 25568, 25570, 50673 & 50752 3/16" STAINLESS STEEL BRAIDED FLEX LANCE Series 50559, 51162
PAGE 99
Hoses & Lances up to 15,000 PSI (1000 Bar) pressure drop data .140" O.D. STEELFLEX™ LANCE Series 51020 10000 10000 50' 9000 35' 25' 8000 15' 10' 5' Pump Pressure (psi) 6000 5000 4000 Values represented include pressure drop through standard nozzle. 3000 2000 1000 5' 10' 25' 15' 20' 8000 20' 7000 Pump Pressure (psi) 35' 9000 7000 6000 5000 4000 3000 HOSES & LANCES .170" O.D. STEELFLEX™ LANCE Series 51015 Values represented include pressure drop through standard nozzle.
PAGE 100
Hoses & Lances up to 15,000 PSI (1000 Bar) pressure drop data RIGID LANCES — 3/4" PIPE 10,000 psi (700 bar) Series 53731 RIGID LANCES — 1/2" PIPE Series 51069 & 51082 2000 1200 20' 800 15' 600 10' 8' 400 Pressure Drop (psi) 1600 15' 1200 10' 800 8' 6' 6' 400 200 0 0 0 10 20 30 40 50 60 70 80 0 90 100 110 120 10 20 30 40 50 60 70 80 90 100 110 120 Flow Rate (gpm) Flow Rate (gpm) RIGID LANCES — 3/8" PIPE Series 50596 & 51068 RIGID LANCES — 1/4" PIPE Series 50594 & 51067
PAGE 101
Hoses & Lances up to 15,000 PSI (1000 Bar) pressure drop data RIGID LANCES — 1/8" PIPE Series 50592, 51066 & 54411 RIGID LANCES — 1/16" PIPE Series 51061 & 51081 8000 8000 25' 25' 10' 20' 8' 15' 20' 8' 6' Pressure Drop (psi) 6000 5000 4000 3000 5000 4000 3000 2000 2000 1000 1000 0 0 0 10 20 30 40 0 4 8 12 Flow Rate (gpm) 16 20 24 28 Flow Rate (gpm) RIGID LANCES — 3/8" O.D. MECHANICAL TUBING Series 51062 RIGID LANCES — 1/4" O.D.
PAGE 102
NOZZLES up to 15,000 PSI (1000 Bar) ORBI-JET™ QCX SELF-ROTATING SURFACE CLEANING NOZZLE The Jetstream Orbi-Jet QCX is a rugged, self-powered, rotating nozzle utilizing up to four straight-pattern, hard hitting, replaceable nozzles. The nozzle rotor rotates in a 360° pattern to provide maximum surface coverage and superior cleaning.
PAGE 103
NOZZLES up to 15,000 PSI (1000 Bar) ORBI-JET™ QCX Replacement Parts SELF-ROTATING SURFACE CLEANING NOZZLE Item Part No. Description 1 26762 Retaining Ring 2 52157 Shroud 3 52305 Rebuild Kit (Items 3a to 3g) 4 52169 Body 5 54277 Rotor 6 28435 Straightening Vane 7 53503 Plug 8 53502 Plug Retainer 9 OX SERIES CARBIDE NOZZLES 54276 Retaining Screw • H igh productivity carbide nozzles designed for use in the Orbi-Jet QCX.
PAGE 104
NOZZLES up to 15,000 PSI (1000 Bar) ORBI-JET™ QCX SELF-ROTATING SURFACE CLEANING NOZZLE UHPX SERIES SAPPHIRE NOZZLES • H igh productivity sapphire nozzles for use in the Orbi-Jet QCX apphire orifices are more durable than carbide • S • T apered orifice retainer reduces turbulence and provides a cohesive, aggressive waterjet • S elect nozzles from the charts below by choosing operating pressure, desired flow, and two or four nozzle operation WARNING: Flow rates greater than 10 gpm (38
PAGE 105
NOZZLES up to 15,000 PSI (1000 Bar) ORBI-JET™ SELF-ROTATING SURFACE CLEANING NOZZLE The Jetstream Orbi-Jet is a rugged, self-powered, rotating nozzle utilizing two straight-pattern, hard-hitting, replaceable nozzles. The nozzle rotor rotates in a 360° pattern to provide maximum surface coverage and superior cleaning.
PAGE 106
NOZZLES up to 15,000 PSI (1000 Bar) ORBI-JET™ Replacement Parts SELF-ROTATING SURFACE CLEANING NOZZLE Item Part No. Description 1 26762 Retaining Ring 2 52157 Shroud 3 52305 Rebuild Kit (Items 3a to 3g) 4 52169 Body 5 52173 Rotor 6 26871 Straightening Vane 7 52158 Retaining Screw WARNING: Flow rates greater than 10 gpm (38 lpm) at 15,000 psi (1000 bar) are not recommended for use in hand gun cleaning operations with an Orbi-Jet due to excessive thrust.
PAGE 107
Nozzles up to 15,000 PSI (1000 Bar) replaceable nozzle tips quick reference chart Nozzle Connection* Type/Use Orifice Material Patterns Straight 15° Fan Tungsten Carbide 25° Fan 50° Fan Page HHTC 1/4" NPT Male Hard Hitter HHS0 1/4" NPT Male Hard Hitter S 1/4" NPT Male Hard Hitter P4TC 1/4" NPT Male Low Profile Tungsten Carbide Straight E-10 P2TC 1/8" NPT Male Low Profile Tungsten Carbide Straight E-10 P1 1/16" NPT Male Low Profile Stainless Steel Straight E-11 P1S0 1/
PAGE 108
Nozzles up to 15,000 PSI (1000 Bar) replaceable nozzle tips Nozzle flow chart CARBIDE ORIFICES — GROUP A Use chart below for the following nozzle series: HHTC (page E-9) P4TC (page E-10) Flow (gpm) at specified pressures (psi) Orifice Size No. in mm 000 .018 0.46 0 .029 0.74 00 1 2 NOZZLES 3 4 5 6 7 8 9 10 12 14 15 20 30 .025 .033 .038 .042 .046 .055 .063 .067 .070 .073 .078 .081 .089 .093 .110 .125 P2TC (page E-10) .7 .7 .8 .8 .9 1.0 1.0 1.1 2.2 2.
PAGE 109
Nozzles up to 15,000 PSI (1000 Bar) replaceable nozzle tips nozzle flow chart SAPPHIRE ORIFICES Use chart below for the following nozzle series: P1S0 (page E-11) Flow (gpm) at specified pressures (psi) Orifice Size No. in mm 000 .018 0.46 0 .029 0.74 00 1 2 3 4 5 .025 .033 .038 .042 .046 .052 ORS* (page E-5) Flow (lpm) at specified pressures (bar) 5,000 6,000 7,000 8,000 9,000 10,000 11,000 12,000 13,000 14,000 15,000 300 .5 .5 .5 .6 .6 .6 .7 .7 .7 .8 4.3 4.9 5.5 6.
PAGE 110
Nozzles up to 15,000 PSI (1000 Bar) HHTC Nozzles replaceable nozzle tips HHTC0 Straight Jet • T apered geometry provides highly cohesive, distortion-free waterjets for concentrated, work saving cleaning and cutting power • Enables more work to be done in less time • Straight (0°) and fan patterns available • 1/4" NPT Male connection* NOZZLES • 1 5,000 psi (1000 bar) maximum working pressure Orifice Size Part No. Orifice Size Part No.
PAGE 111
Nozzles up to 15,000 PSI (1000 Bar) P4TC Nozzles LOW PROFILE nozzle tips P4TC0 Straight Jet • T ungsten carbide orifice inserts significantly outlast conventional nozzle orifice material • T apered geometry provides highly cohesive, distortion-free waterjets for concentrated, work saving cleaning and cutting power • 1/4" NPT Male connection* 55041 000 55043 0 55044 55045 55046 • 1 5,000 psi (1000 bar) maximum working pressure Pipe Cleaning Nozzles — See pages E-17 – E-18 Ori
PAGE 112
Nozzles up to 15,000 PSI (1000 Bar) P1 Nozzles replaceable nozzle tips • Low profile design for unobstructed pipe cleaning P1 Straight Jet • Stainless steel • Precision drilled orifice • T apered geometry provides highly cohesive, distortion-free waterjets for concentrated, work saving cleaning and cutting power • Straight (0°) patterns • 1/16" NPT Male connection* Part No. Orifice Size For nozzle flow rates, see Steel Orifices chart on page E-8.
PAGE 113
Nozzles up to 15,000 PSI (1000 Bar) RM Nozzles flush mount nozzle tips • Flush mount design • T apered geometry provides highly cohesive, distortion-free waterjets for concentrated, work saving cleaning and cutting power RM Straight Jet • Straight (0°) patterns • 1/2"-28UNEF male connection Part No.
PAGE 114
Nozzles up to 15,000 PSI (1000 Bar) RotoMag™ 2-d pipe cleaning nozzle The Jetstream RotoMag is a self-powered rotating nozzle designed for cleaning stacks, sewer lines, drains, tanks, on-line boilers, and other large diameter pipes. NOZZLES • W ater provides the rotational motion and creates the bearing on which the nozzle spins.
PAGE 115
Nozzles up to 15,000 PSI (1000 Bar) RotoMag™ 2-D PIPE CLEANING NOZZLE ACCESSORIES NOZZLE EXTENSIONS • Available in three sizes • P uts nozzles closer to the inner surface of large pipes for more effective cleaning CENTRALIZERS • Required for use of extensions in horizontal pipe runs • Several models are available for a variety of applications 52320-05 Diameter Diameter Diameter “A” “B” “C” in mm 5.0 52320-10 10.0 52320-15 15.0 127 254 381 in 4.3 7.9 mm 109 201 11.
PAGE 116
Nozzles up to 15,000 PSI (1000 Bar) ROTOMAG™ • Flush mount • Select nozzles from the charts below by RM SERIES CARBIDE NOZZLES • Precision honed carbide orifices 2-D PIPE CLEANING NOZZLE choosing operating pressure, desired flow, and two, four, or six nozzle operation Six RM Nozzles in RotoMag 52688 52452 52453 52454 52456 52457 52458 Flow (gpm) at specified pressures (psi) Flow (lpm) at specified pressures (bar) Orifice Size 5,000 6,000 7,000 8,000 9,000 10,000 11,000 12,000 13,000 14,000 15,
PAGE 117
Nozzles up to 15,000 PSI (1000 Bar) ROTOMAG™ 2-D PIPE CLEANING NOZZLE RMS SERIES SAPPHIRE NOZZLES • High productivity sapphire nozzles designed for use in the RotoMag • M ore durable than tungsten carbide for longer service life and lower operating cost Flow charts on this page are applicable only to the RotoMag nozzle which uses a portion of the water to provide a bearing for nozzle rotation.
PAGE 118
Nozzles up to 15,000 PSI (1000 Bar) PIPE CLEANING NOZZLES Commonly called “pineapples,” pipe cleaning nozzles are used for cleaning large diameter pipes (generally 4" or larger). • Available in a variety of sizes and patterns • N ozzle ports can be plugged to create several unique patterns to perform specific tasks (unplugging, flushing, etc.) • Heat-treated stainless steel Connections* Part No.
PAGE 119
Nozzles up to 15,000 PSI (1000 Bar) PIPE CLEANING NOZZLES Part No. Max Operating Pressure Connections* Inlet Front Nozzle Port psi 51094 3/4" NPT Fml 3/4" NPT Fml 1/4" NPT Fml 10,000 bar 700 * See details on all connection types beginning on page I-2. Configurations & Accessories Single P4TC Nozzles See page E-10 Dimensions shown in inches Multiple Nozzle Port Plug Plug unused nozzle ports Part No. 25392 Towline Nipple Connect multiple pipe cleaning nozzles Part No.
PAGE 120
Nozzles up to 15,000 PSI (1000 Bar) TUBE SPINNER™ TUBE CLEANING NOZZLES • Provide the most thorough cleaning of tube walls 1/2" • Maximum impact without streaking • S elf-rotating, heat-treated stainless steel sleeve spins on a bearing of water and features two radial jets that spin at high speed for complete coverage • Simple two-piece design 3/8" • Specially coated nozzle body for maximum lubricity • Custom flow rates available for special applications • T ube nozzles (FP nozzles show
PAGE 121
Nozzles up to 15,000 PSI (1000 Bar) DRIL-JET™ TUBE CLEANING NOZZLES 1/2" Dril-Jet Tube Cleaning Nozzles are specially designed for cleaning plugged tubes. An internal rotor features two spinning front jets to drill through tube blockages while non-rotating rear jets flush debris and generate thrust to pull nozzle and lance through tube. • No external moving parts • No ball bearings to replace! Rotor spins on water bearing.
PAGE 122
Nozzles up to 15,000 PSI (1000 Bar) TUBE CLEANING NOZZLES SElection & part numbering Use the part numbering instructions and flow chart on this page for ordering tube nozzles from pages E-22 to E-30. Nozzle Part Numbering Example Part Number: FP 3 4 - 7 NOZZLE SERIES FP EX MS MP E C FPC FPT TP SIZE From left column of nozzle size and pattern charts (Pages E-22 – E-30) FLOW RATING Find the flow rate number that most closely matches the desired flow and pressure from chart below.
PAGE 123
Nozzles up to 15,000 PSI (1000 Bar) TUBE CLEANING NOZZLES See page E-21 for ordering instructions. SERIES FP SIZES Shown Actual Size FP1 — 1/16" NPT Fml* Diameter .375" (9.5 mm) Length .85" (21.
PAGE 124
Nozzles up to 15,000 PSI (1000 Bar) TUBE CLEANING NOZZLES SERIES MP • S pecifically for use with rigid lances that have female pipe threads (NPT Fml) • Recessed orifices for protection from surface abrasion or damage by wrenches • D ouble-tapered nose for fast, unrestricted travel through plugged tubes • Machined from heat-treated stainless steel • Maximum working pressure: 15,000 psi (1000 bar) • F our sizes, seven standard patterns and fourteen flow ratings • See page E-21 for flow ratings
PAGE 125
Nozzles up to 15,000 PSI (1000 Bar) TUBE CLEANING NOZZLES SERIES FPC • F or use with flex or rigid lances that have male pipe threads (NPT Male) • Ultra-compact design ideal for getting around sharp bends in tube • O rifices recessed for protection from surface abrasion or damage by wrenches • Machined from heat-treated stainless steel • Maximum working pressure: 15,000 psi (1000 bar) • Five sizes, seven standard patterns and fourteen flow ratings • See page E-21 for flow ratings and ordering i
PAGE 126
Nozzles up to 15,000 PSI (1000 Bar) TUBE CLEANING NOZZLES SERIES ex • For use with flex or rigid lances that have male pipe threads (NPT Male) • F eatures long, tapered nose for penetrating front jets and two rows of recessed rear jets for flushing, polishing and pulling • Wrench flats for easy installation and removal • Machined from heat-treated stainless steel • Maximum working pressure: 15,000 psi (1000 bar) • F ive sizes, five standard patterns and fourteen flow ratings (eleven for standard p
PAGE 127
Nozzles up to 15,000 PSI (1000 Bar) TUBE CLEANING NOZZLES SERIES e • F or use with flex or rigid lances that have male pipe threads (NPT Male) • Features long, tapered nose for penetrating fouled tubes • Machined from heat-treated stainless steel • Maximum working pressure: 15,000 psi (1000 bar) • F ive sizes, two standard patterns and fourteen flow ratings (eleven for standard patterns) • See page E-21 for flow ratings and ordering instructions • Custom patterns available 1 PATTERNS SIZES E0
PAGE 128
Nozzles up to 15,000 PSI (1000 Bar) TUBE CLEANING NOZZLES SERIES fpt • F or use with flex or rigid lances that have male pipe threads (NPT Male) • F eatures three rows of rearward facing jets for powerful polishing and flushing • Wrench flats for easy installation and removal • Machined from heat-treated stainless steel • Maximum working pressure: 15,000 psi (1000 bar) • F ive sizes, four standard patterns and fourteen flow ratings (ten for standard patterns) • See page E-21 for flow ratings
PAGE 129
Nozzles up to 15,000 PSI (1000 Bar) TUBE CLEANING NOZZLES SERIES MS • F or use with Jetstream flex or rigid lances that have female machine screw threads (UNF, UNC) • D esigned with the smallest possible outside diameter for cleaning small tubes • Wrench flats for easy installation and removal • Machined from heat-treated stainless steel • Maximum working pressure: 10,000 psi (700 bar) • Four sizes, seven standard patterns and fourteen flow ratings • See page E-21 for flow ratings and ordering in
PAGE 130
Nozzles up to 15,000 PSI (1000 Bar) TUBE CLEANING NOZZLES SERIES C • F or use with specially designed Jetstream flex lances that have male machine screw threads (UNEF) • U ltra-compact design for cleaning U-tubes and other small diameter tubes • Wrench flats for easy installation and removal • Machined from heat-treated stainless steel • L ocking pin (shown below) must be installed to prevent nozzle from unscrewing from lance • M aximum working pressure: C1: 8,000 psi (550 bar) C2: 10,000 psi (7
PAGE 131
Nozzles up to 15,000 PSI (1000 Bar) TUBE CLEANING NOZZLES SERIES TP THRUSTERS • U sed in combination with Tube Spinners or other nozzles that do not have rear jets to provide thrust for pulling through tubes • R ear orifices recessed for protection from surface abrasion or damage by wrenches • F emale pipe threads at inlet (NPT Fml) and male pipe threads at outlet (NPT Male) • Machined from heat-treated stainless steel • Maximum working pressure: 15,000 psi (1000 bar) • Four sizes, two standard
PAGE 132
Nozzles up to 15,000 PSI (1000 Bar) abrasive injector nozzle • Provides powerful, cohesive mix of water and abrasive • E asily replaceable, precision-drilled spool nozzle creates a powerful, focused waterjet and provides suction force to pull the abrasive media into the nozzle and mix with pressurized water.
PAGE 133
fittings & gauges up to 15,000 PSI (1000 Bar) PRESSURE GAUGES • Bottom mount • 4" high visibility face with laminated safety glass dial cover Part No. 51126 • Accurate within +/-0.5% of full scale range • Stainless steel case, fitting and internals • Heavy-duty movement • Glycerin-filled for protection against vibration and pulsation • Restrictor screw provides maximum protection against pulsation • Blow-out pressure relief plug for maximum safety Part No.
PAGE 134
fittings & gauges up to 15,000 PSI (1000 Bar) THREAD LUBRICANTS Thread Lubricants prevent threaded connections from galling together or seizing up, and are a necessary protection for stainless steel threaded components. Silver-Based Anti-Seize .7 oz. Stick Bottom twists to extend a solid, rub-on thread lubricant for easy, mess free application. Part No. 29057 Blue Goop Thread Lubricant 2 oz. Tube Part No. 27721 Nickel-Based Anti-Seize 1 lb. Brush Top Can Part No.
PAGE 135
fittings & gauges up to 15,000 PSI (1000 Bar) screw type quick connect couplings partek style • Easy, hand-tight connection of hoses and other components • 3/8" and 1/2" NPT coupling halves are interchangeable • 1 " Type M, 3/4" Type M and 9/16" MP coupling halves are interchangeable • S eal kits include O-ring seal and backup ring • Stainless steel Female Male Connection Type* 28921 28921M 1/2" NPT Fml 50990 3/4" NPT Fml 54180 3/8" NPT Fml 54754 54767 54768 Male 1" NPT Fml 2884
PAGE 136
fittings & gauges up to 15,000 PSI (1000 Bar) crosses — pipe thread (NPT) • Stainless steel Part No. Connection Type* Maximum Operating Pressure 96048 54368 90262 29532 28577 1" NPT Fml 3/4" NPT Fml 1/2" NPT Fml 3/8" NPT Fml 1/4" NPT Fml psi bar 15,000 1000 10,000 15,000 15,000 15,000 700 1000 1000 1000 * See details on all connection types beginning on page I-2. tees — pipe thread (NPT) • Stainless steel Part No.
PAGE 137
fittings & gauges up to 15,000 PSI (1000 Bar) 45° ELBOWS — PIPE THREAD (NPT) • Stainless steel Part No. Connection Type* Maximum Operating Pressure 56594 50302 50824 50296 psi 1" NPT Fml 15,000 3/4" NPT Fml 15,000 1/2" NPT Fml 15,000 3/8" NPT Fml 15,000 bar 1000 1000 1000 1000 * See details on all connection types beginning on page I-2. COUPLINGS — PIPE THREAD (NPT) • M achined from heat-treated stainless steel to allow small outside diameters for tube cleaning.
PAGE 138
fittings & gauges up to 15,000 PSI (1000 Bar) HAMMER UNIONS — PIPE THREAD (NPT) • Stainless steel Part No. Connection Type* Seal Maximum Operating Pressure 28319 1-1/4" NPT Fml 50392 3/4" NPT Fml 29486 3/8" NPT Fml 27181 1" NPT Fml 29485 psi 29319S 10,000 700 26314 10,000 700 92011 1/2" NPT Fml bar 10,000 29485S 10,000 29486S 10,000 700 700 700 * See details on all connection types beginning on page I-2.
PAGE 139
fittings & gauges up to 15,000 PSI (1000 Bar) HEX NIPPLES — PIPE THREAD (NPT) • Stainless steel nipples are copper plated for galling resistance Connection 1 (C1) J70382 2" NPT Male 29055 1-1/2" NPT Male J70385 1-1/4" NPT Male J70383 J70384 J70386 52674 53054 Material Connection 2 (C2) 7,500 500 1-1/2" NPT Male Stainless Steel 7,500 500 1-1/2" NPT Male 1-1/4" NPT Male 1-1/4" NPT Male 1" NPT Male 1" NPT Male 1" NPT Male 3/4" NPT Male 26151 3/4" NPT Male 3/4" NPT Male 51702 3/4"
PAGE 140
fittings & gauges up to 15,000 PSI (1000 Bar) NIPPLES — PIPE THREAD (NPT) • Stainless steel O.D. I.D. Connection Type* Part No. specify length (in inches) in place of “XX” J55703-XX 1" NPT Male 26146-XX 3/4" NPT Male 28875-XX 55450-XX 51106-XX in mm psi bar 1.315 33.4 .599 15.2 10,000 700 .614 15.6 1.050 3/8" NPT Male .675 .840 .540 1/8" NPT Male 51397-XX mm 1.050 1/4" NPT Male 25215-XX in 3/4" NPT Male 1/2" NPT Male 51098-XX .405 1/16" NPT Male Max.
PAGE 141
fittings & gauges up to 15,000 PSI (1000 Bar) y-fittings • Stainless steel Part No. Connection Type* Maximum Operating Pressure 29678 70040 J70393 psi 1" NPT Fml 10,000 1/2" NPT Fml 15,000 3/4" NPT Fml bar 700 15,000 1000 1000 * See details on all connection types beginning on page I-2. pipe thread male to straight boss male adapters • Stainless steel Part No.
PAGE 142
fittings & gauges up to 15,000 PSI (1000 Bar) straight boss plugs • Stainless steel Part No. Connection Type* Replacement Seal 25702 25703 #12 Straight Boss Male #8 Straight Boss Male 25670 25824 Maximum Operating Pressure psi 10,000 10,000 bar 700 700 * See details on all connection types beginning on page I-2.
PAGE 143
fittings & gauges up to 15,000 PSI (1000 Bar) pipe thread male (NPT Male) to MEDIUM PRESSURE MALE ADAPTERS • Stainless steel Connection 1 (C1) 55033 29669 29316 Maximum Operating Pressure Connection Types* Part No.
PAGE 144
fittings & gauges up to 15,000 PSI (1000 Bar) pipe thread male (NPT Male) to MEDIUM PRESSURE FEMALE ADAPTERS Maximum Connection Types* Part • Stainless steel • Copper plated for galling resistance Operating Pressure No.
PAGE 145
fittings & gauges up to 15,000 PSI (1000 Bar) pipe thread female (NPT Fml) to british standard pipe (bsp) male ADAPTERS • Stainless steel 55224 Maximum Operating Pressure Connection Types* Part No. Connection 1 (C1) Connection 2 (C2) psi bar 1/2" NPT Fml G1/2" BSP Male 15,000 1000 * See details on all connection types beginning on page I-2.
PAGE 146
fittings & gauges up to 15,000 PSI (1000 Bar) TYPE M MALE CONNECTORS • Stainless steel Connection Types* Part No.
PAGE 147
fittings & gauges up to 15,000 PSI (1000 Bar) jetstream hhp male adapters For use with 5015Q pumps, the Jetstream HHP connection features an easily replaceable seal to prevent wear or damage to the manifold and a large bore to minimize pressure drop through fittings. • Copper plated for galling resistance • Stainless steel JETSTREAM HHP MALE TO PIPE THREAD MALE (NPT) ADAPTERS Connection 1 (C1) 56863 56862 Maximum Operating Pressure Connection Types* Part No.
PAGE 148
fittings & gauges up to 15,000 PSI (1000 Bar) MEDIUM PRESSURE CROSSES • All medium pressure crosses include gland nuts and collars • Stainless steel Part No. Connection Type* 28301 29067 1" MP Female psi 20,000 bar 1400 3/4" MP Female 20,000 1400 3/8" MP Female 20,000 1400 27969 9/16" MP Female 29069 1/4" MP Female 29068 Maximum Operating Pressure 20,000 20,000 1400 1400 * See details on all connection types beginning on page I-2.
PAGE 149
fittings & gauges up to 15,000 PSI (1000 Bar) MEDIUM PRESSURE STRAIGHT COUPLINGS • All medium pressure straight couplings include gland nuts and collars • Stainless steel Connection Types* Part No.
PAGE 150
fittings & gauges up to 15,000 PSI (1000 Bar) MEDIUM PRESSURE MALE CONNECTORS Stainless steel Connection Types* Part No.
PAGE 151
fittings & gauges up to 15,000 PSI (1000 Bar) medium pressure NIPPLES • High tensile strength, cold drawn stainless steel • Glands and collars not included Left-hand Medium Pressure Tubing (MP Tube LH): For use in standard medium pressure connections (using glands and collars) or with lance fittings (no glands and collars) or tube nozzles that have medium pressure, left-handed female threads. Available in 1/4" to 1" sizes. MP Tube LH Connection Part No.
PAGE 152
fittings & gauges up to 15,000 PSI (1000 Bar) MEDIUM PRESSURE ANTI-VIBRATION GLAND ASSEMBLIES Used to reduce stress on tubing threads in conditions where bending or vibration are present, anti-vibration gland assemblies feature a collet that clamps onto the tubing when the connection is tightened to provide extra support and strength. Assembly Part No. Replacement Part No.
PAGE 153
fittings & gauges up to 15,000 PSI (1,000 Bar) Rigid Lance adapters — machine screw female to pipe thread male (NPT Male) • Used to connect small diameter rigid lances with machine screw threads (see page D-11) to pipe threaded hoses and fittings • Stainless steel • Copper plated for galling resistance Connection Types* Part No.
PAGE 154
safety up to 15,000 PSI (1000 Bar) RUPTURE DISC HOLDERS For protection from dangerous over-pressurization rupture discs function in a waterblast system analogous to the function of fuses in an electrical circuit. When the system pressure exceeds that of the burst disc, the disc bursts and allows water to flow out of the holder’s cap, relieving the system of high pressure.
PAGE 155
safety up to 15,000 PSI (1000 Bar) SEVERE SERVICE RELIEF VALVEs For use as a primary relief device to protect waterblast systems and operators from dangerous overpressurization, the Severe Service Relief Valve opens to safely bypass some of the system flow in circumstances where the operating pressure exceeds the factory set opening pressure of the valve.
PAGE 156
safety up to 15,000 PSI (1000 Bar) SAFETY SHROUDS & whip hoses Safety shroud and whip hose sets provide necessary hand gun operator protection against dangerous hose failures. • Includes safety shroud, whip hose and adapter • 3 ft (1 m) safety shrouds enclose the portion of the hose nearest the operator’s body. Cordura over braided stainless steel construction. • 6 ft (1.8 m) whip hoses should be changed periodically to ensure that the hose nearest the operator’s body is always in good condition.
PAGE 157
safety up to 15,000 PSI (1000 Bar) STRAIN RELIEF HOSE Used for flex lance applications, the strain relief hose prevents kinking of the flex lance to extend service life. • R ubber hose material is more flexible and manageable than thermoplastic flex lance material • Connects the foot control gun and the flex lance Part No. 50135 50138 ft m Inlet Connection* (to Foot Gun) 3 0.9 1/2" NPT Male Length 3 0.9 1/2" NPT Male Outlet Connection* (to Flex Lance) 1/4" NPT Fml 1/8" NPT Fml Hose I.
PAGE 158
safety up to 15,000 PSI (1000 Bar) FLEX LANCE SAFETY GRIP For use in flex lance tube cleaning operations, the safety grip prevents a nozzle from unexpectedly exiting a tube by providing a stop through which the sleeve of the flex lance will not pass. Package includes handle, lance stop retainer for use on tubes up to 3/4" O.D., and the three most commonly used lance stops. Part No. 54164 Flex Lance Safety Grip Part No.
PAGE 159
safety up to 15,000 PSI (1000 Bar) turtleskin waterarmor TurtleSkin® WaterArmor provides waterblast operators with the highest level of protection available from high-pressure waterjets. Its patented fabric has the tightest weave ever achieved in aramid, a fiber two times the strength of steel and fives times lighter.
PAGE 160
safety up to 15,000 PSI (1000 Bar) eyewear Premium Safety Glasses • Stylish design • Adjustable nose pad • Rubber coated temple tips • Scratch resistant, UV-blocking coating • Anti-fog lens vent • Z87+ approved economy Safety Glasses • Scratch resistant, UV-blocking coating • Z87+ approved Part No. Lens/Frame J70318 Clear/Frosted Part No.
PAGE 161
safety up to 15,000 PSI (1000 Bar) hard hats foot and leg protection • Lightweight polyethylene with impactabsorbing ridges and rain trough • Six-point nylon suspension with ratchet knob or pin-lock adjustment • Washable soft brow pad • Universal accessory slot • White • ANSI Z89.
PAGE 162
safety up to 15,000 PSI (1000 Bar) barricades and signs SIGNS “Health Hazard” Caution Sign 8-1/2" x 11" “Restricted” Caution Sign 8-1/2" x 11" “Waterblasting” Danger Sign 8-1/2" x 11" Safety Warning Sticker: “Always Wear Your Safety Gear” Part No. 26247 Part No. 26253 Part No. 25614 Part No.
PAGE 163
surface cleaners up to 15,000 PSI (1000 Bar) HYDRO-MOWER SURFACE CLEANER Used to clean large horizontal surfaces with four powerful, self-rotating jets, Jetstream Hydro-Mowers are designed for efficiency, ease of use, fast maintenance, safety and versatility. They are ideal for any job, from grate and floor cleaning to stripping paint and rubber. wivel speed can be • S adjusted from 50 to 800 RPM using a standard Allen wrench. No fluid changes. No “hit or miss” spray arm angle adjustments.
PAGE 164
surface cleaners up to 15,000 PSI (1000 Bar) HYDRO-MOWER SURFACE CLEANER wo mower sizes available • T • Self rotating — no air required! sed with RM Nozzles • U alvanized deck • G ydro-Mowers utilize a four-jet Spray Bar that • H features two jets directed 15° inward and two jets directed 15° outward to create two rotating paths for maximum coverage while the jet angle is ideal for cleaning grates in paint booths. Part No.
PAGE 165
surface cleaners up to 15,000 PSI (1000 Bar) HYDRO-MOWER SURFACE CLEANERS SURFACE CLEANER replacement parts Jetstream of Houston, LLP Phone: US & Canada: 800-231-8192 or 813-590-1300 Web Site: www.waterblast.
PAGE 166
surface cleaners up to 15,000 PSI (1000 Bar) HYDRO-MOWER SURFACE CLEANER replacement parts Part No.
PAGE 167
TECHNICAL up to 15,000 PSI (1000 Bar) UNIT CONVERSIONS & FORMULAS Length Volume Weight Pressure Flow Force Torque Power Formula Power Requirements* Conversion Example 1 in = 25.4 mm 12 in x 25.4 = 304.8 mm 1 in = .0254 m 120 in x .0254 = 3.05 m 1 ft = .3048 m 12 ft x .3048 = 3.68 m 1 mm = .0394 in 100 mm x .0394 = 3.94 in 1 m = 39.37 in 10 m x 39.37 = 393.7 in 1 m = 3.281 ft 10 m x 3.281 = 32.81 ft 1 gal = 3.785 l 10 gal x 3.785 = 37.85 l 1 L = .2642 gal 100 L x 26.42 = 26.
PAGE 168
TECHNICAL up to 15,000 PSI (1000 Bar) CONNECTION TYPES Several connection types are used at pressures of 15,000 psi (1000 bar) and below. The purpose of this section is to allow users to identify the connections needed and provide information on the features and proper use of each. Actual Size Reference Chart Pipe threads (npt) ost widely used connection • M type at pressures of 15,000 psi (1000 bar) and below.
PAGE 169
TECHNICAL up to 15,000 PSI (1000 Bar) CONNECTION TYPES Pipe threads (npt) (continued) • J etstream pipe threads are machined to a special specification to ensure greater thread engagement for increased safety and to reduce the risk of galling as noted on the previous page. Actual Size Reference Chart (continued) Pipe Thread Connection Instructions 1. Wrap Teflon® tape three or four times around the male threads in a clockwise direction (if looking at the face of the threaded end of the part). 2.
PAGE 170
TECHNICAL up to 15,000 PSI (1000 Bar) CONNECTION TYPES Actual Size Reference Chart jetstream hhp male adapters For use with 5015Q pumps, the Jetstream HHP connection features an easily replaceable seal to prevent wear or damage to the manifold and a large bore to minimize pressure drop through fittings.
PAGE 171
TECHNICAL up to 15,000 PSI (1000 Bar) CONNECTION TYPES metric Actual Size Reference Chart • I nternationally used connection • Designed for fast, simple connection of waterblast hoses and lances to waterblast equipment • Male conical seat protected from damage by the hose swivel nut Connection Sizes M22 x 1.5 M24 x 1.5 M36 x 2.0 M43 x 2.0 TECHNICAL Note: Always apply thread lubricant (anti-seize) to male threads before assembling waterblast connections.
PAGE 172
Technical up to 15,000 PSI (1000 Bar) CONNECTION TYPES Actual Size Reference Chart British standard pipe (bsp) • I ndustry standard connection most common in Europe esigned for fast, • D simple connection of waterblast hoses and lances to waterblast equipment ale conical seat • M protected from damage by the hose swivel nut roducts with BSP connections featured in this catalog are straight thread • P connection using a metal-to-metal conical seat as the sealing method.
PAGE 173
Technical up to 15,000 PSI (1000 Bar) CONNECTION TYPES Actual Size Reference Chart Medium pressure (MP) • Industry standard connection for 20,000 psi (1400 bar) applications, medium pressure is occasionally used in applications at 15,000 psi (1000 bar) and below. onnections exist in two different forms: • C 1. Used to connect medium pressure tubing with a conical male seat and lefthanded threads to a female port using a gland nut and left-hand threaded collar (Gland, Collar & Tubing). 2.
PAGE 174
index up to 15,000 PSI (1000 Bar) part number index 00111 . . . . . . . . . . 01437 . . . . . . . . . 04101 . . . . . . . . . 25059 . . . . . . . . . 25060 . . . . . . . . . 25117 . . . . . . . . . . 25118 . . . . . . . . . . 25120 . . . . . . . . . 25132 . . . . . . . . . 25174 . . . . . . . . . 25193 . . . . . . . . . 25206 . . . . . . . . . 25212 . . . . . . . . . 25215 (Series) . . . 25220 . . . . . . . . . 25228 . . . . . . . . . 25229 . . . . . . . . . 25247 . . . . . . . . . 25251 . . . . . . . . .
PAGE 175
index 26470 . . . . . . . . . B -21, B-28, B-37, B-39, B-40, B-42, B-44, B-46, B-48, B-50 26472 . . . . . . . . . B-21, B-28, B-37, B-39, B-40, B-42, B-44, B-46, B-48, B-50 26473 . . . . . . . . . B-37, B-48 26474 . . . . . . . . . B-21, B-28, B-37, B-39, B-40, B-42, B-44, B-46, B-48, B-50 26476 . . . . . . . . . B-21, B-28, B-37, B-39, B-40, B-42, B-44, B-46, B-48, B-50 26478 . . . . . . . . . B-13 26479 . . . . . . . . . B-7, B-10 26481 . . . . . . . . . B-7, B-10 26482 . . . . . . . . .
PAGE 176
index up to 15,000 PSI (1000 Bar) 28673-0250404 . . . 28673-0350404 . . . 28673-0500404 . . . 28700 . . . . . . . . . 28702 . . . . . . . . . 28726 . . . . . . . . . 28731 . . . . . . . . . 28732 . . . . . . . . . 28779 . . . . . . . . . 28786 . . . . . . . . . 28797 . . . . . . . . . 28804 . . . . . . . . . 28806 . . . . . . . . . 28822 . . . . . . . . . 28826 . . . . . . . . . 28844 . . . . . . . . . 28844F . . . . . . . . 28844M . . . . . . . . 28844S . . . . . . . . 28852 . . . . . . . . .
PAGE 177
index up to 15,000 PSI (1000 Bar) 51156 . . . . . . . . . . 51162 (Series) . . . 51162-25 . . . . . . . 51162-50 . . . . . . . 51169 . . . . . . . . . . 51191 . . . . . . . . . . 51279 . . . . . . . . . 51285 . . . . . . . . . 51287 . . . . . . . . . 51288 . . . . . . . . . 51291 . . . . . . . . . 51292 . . . . . . . . . 51293 . . . . . . . . . 51294 . . . . . . . . . 51295 . . . . . . . . . 51296 . . . . . . . . . 51297 . . . . . . . . . 51298 . . . . . . . . . 51299 . . . . . . . . . 51300 . . . . . . .
PAGE 178
index up to 15,000 PSI (1000 Bar) INDEX 51746 . . . . . . . . . B -15, B-18, B-19, B-23, B-24, B-26, B-30, B-31 51748 . . . . . . . . . B-13 51749 . . . . . . . . . B-13 51750 . . . . . . . . . B-47 51755 . . . . . . . . . B-47 51760 . . . . . . . . . B-11 51765 . . . . . . . . . B-11 51766 . . . . . . . . . B-23, B-24, B-26 51767 . . . . . . . . . C-11, C-12 51769 . . . . . . . . . C-11, C-12 51770 . . . . . . . . . B-11 51775 . . . . . . . . . B-11 51779 . . . . . . . . . G-5 51785 . . . . . . . . .
PAGE 179
index 52858 . . . . . . . . . E-20 52859 . . . . . . . . . E-20 52861 . . . . . . . . . B-23, B-26, B-30 52862 . . . . . . . . . B-23, B-26, B-30 52864 . . . . . . . . . B-18, B-23 52865 . . . . . . . . . E-20 52866 . . . . . . . . . B-30 52869 . . . . . . . . . B-30 52870 . . . . . . . . . B-15, B-18, B-23, B-26, B-30 52871 . . . . . . . . . B-30 52872 . . . . . . . . . B-18, B-23, B-26 52873 . . . . . . . . . B-18, B-23, B-26 52875 . . . . . . . . . B-15, B-18, B-23, B-26, B-30 52878 . . . . . . .
PAGE 180
index up to 15,000 PSI (1000 Bar) INDEX 55033 . . . . . . . . . 55041 . . . . . . . . . 55042 . . . . . . . . . 55043 . . . . . . . . . 55044 . . . . . . . . . 55045 . . . . . . . . . 55046 . . . . . . . . . 55047 . . . . . . . . . 55048 . . . . . . . . . 55049 . . . . . . . . . 55050 . . . . . . . . . 55051 . . . . . . . . . 55052 . . . . . . . . . 55053 . . . . . . . . . 55054 . . . . . . . . . 55055 . . . . . . . . . 55056 . . . . . . . . . 55057 . . . . . . . . . 55080 . . . . . . . . . 55085 . . . .
PAGE 181
index up to 15,000 PSI (1000 Bar) Abrasive Injector Nozzle, E-31 Abrasive Blast Media, E-31 Abrasive Pot, E-31 Adapters — see Fittings Aeroquip Couplings, F-3 Air-Operated Diverter Valves, Dump Style, C-9 Shut-In, C-10 Anti-Seize, Thread, F-2 Anti-Vibration Fittings, see Fittings, Anti-Vibration Apparel, Safety, G-6 – 8 Backout Preventers, Pipe Cleaning Nozzle, E-14 Bags, Filter, C-19 Bareshaft Pumps — see UNx Bareshaft Pumps Barricade Tape, G-9 Belt Tension Gauge, B-55 Blue Goop, F-2 Body Protection, G-6
PAGE 182
index up to 15,000 PSI (1000 Bar) INDEX Fittings, Anti-Vibration, F-20 British Standard Pipe (BSP) Male, to Pipe Thread Male (NPT Male), F-12 to Pipe Thread Female (NPT Fml), F-13 Bushings, Reducing, F-6 Collars, Medium Pressure, F-19, F-20 Connection Specifications, British Standard Pipe (BSP), I-6 Jetstream HHP, I-4 Medium Pressure, I-7 Metric, I-5 Pipe Threads (NPT), I-2 – 3 Straight Boss, I-6 Type M, I-4 Couplings, Hammer Unions, F-5 Lug Style, F-3 Medium Pressure
PAGE 183
index Plugs, Jetstream HHP Male, F-15 Medium Pressure, F-19 Pipe Thread Male (NPT Male), E-17, E-18, F-8 Straight Boss, F-9 Quick Connect Couplings, Medium Pressure, F-3 Partek Style Quick Connect, F-3 Pipe Thread (NPT), F-2, F-3 Quick Connect, F-2, F-3 Screw Type Quick Connect, F-3 Twis-Lok, F-2 Type M, F-3 Reducing Bushings, Medium Pressure, F-18 Pipe Thread, F-6 Rigid Lance, F-5, F-19, F-20, F-21 Slimline Couplings, F-5, F-20 Straight Boss Male, to Pipe Thread
PAGE 184
index up to 15,000 PSI (1000 Bar) INDEX Nozzles — continued, MS Series, E-28 OR Series, E-5 – 7 ORS Series, E-5 – 6, E-8 Orbi-Jet, E-4 – 5 Orbi-Jet QCX, E-1 – 3 OX Series, E-2, E-6 – 7 P1 Series, E-6, E-8, E-11 P1S0 Series, E-6, E-8, E-11 P2TC Series, E-6 – 7, E-10 P4TC Series, E-6 – 7, E-10 Pipe Cleaning, E-6 – 8, E-10 – 18 Replaceable Tip, E-2 – 3, E-5 – E-12 RM Series, E-6 – 7, E-12, E-15, H-4 RMS Series, E-6, E-8, E-12, E-16 RotoMag, E-13 – 16 S Series, E-6, E-8, E-11 Sapphire, E-3, E-5 – 6,
PAGE 185
index UNx Fluid End – Model 4215HF (Gen II), B-18 UNx Fluid End – Model 4215N (Gen I), B-24 UNx Fluid End – Model 4215N (Gen II), B-23 UNx Fluid End – Model 4215QN, B-26 UNx Fluid End – Model 4515B (Gen I), B-31 UNx Fluid End – Model 4515B (Gen II), B-30 UNx Fluid End – Model 5015G, B-52 UNx Fluid End – Model 5015Q, B-23 UNx Fluid End – Jetstream Model 3020, B-19 UNx Fluid End – Jetstream Model 3620, B-17 UNx Fluid End – Jetstream Model 4220, B-17 UNx Fluid End – Jetstream Model 5020Q, B-15 UNx Fluid End S
PAGE 186
index up to 15,000 PSI (1000 Bar) UNx Bareshaft Pumps, Features and Benefits, B-1 – 2 Model 3015, B-11 – 13 Model 3615HF, B-8 – 10 Model 4215HF, B-5 – 7 Model 5020Q, B-3 – 4 UNx Fluid Ends, Features and Benefits, B-1 – 2 Model 3015, B-20 – 21 Model 3015B, B-36 – 37 Model 3015N, B-27 – 28 Model 3015Q, B-49 – 50 Model 3015W, B-47 – 48 Model 3115T, B-45 – 46 Model 3515Q, B-43 – 44 Model 3615HF, B-16 – 19 Model 3715B, B-34 – 35 Model 3715W, B-38 – 40 Model 3715WZ, B-41 – 42 Model 4015B, B-32 – 33 Model 4215HF,
PAGE 187
index up to 15,000 PSI (1000 Bar) part number index 00111 . . . . . . . . . . 01437 . . . . . . . . . 04101 . . . . . . . . . 25059 . . . . . . . . . 25060 . . . . . . . . . 25117 . . . . . . . . . . 25118 . . . . . . . . . . 25120 . . . . . . . . . 25132 . . . . . . . . . 25174 . . . . . . . . . 25193 . . . . . . . . . 25206 . . . . . . . . . 25212 . . . . . . . . . 25215 (Series) . . . 25220 . . . . . . . . . 25228 . . . . . . . . . 25229 . . . . . . . . . 25247 . . . . . . . . . 25251 . . . . . . . . .
PAGE 188
index 26470 . . . . . . . . . B -21, B-28, B-37, B-39, B-40, B-42, B-44, B-46, B-48, B-50 26472 . . . . . . . . . B-21, B-28, B-37, B-39, B-40, B-42, B-44, B-46, B-48, B-50 26473 . . . . . . . . . B-37, B-48 26474 . . . . . . . . . B-21, B-28, B-37, B-39, B-40, B-42, B-44, B-46, B-48, B-50 26476 . . . . . . . . . B-21, B-28, B-37, B-39, B-40, B-42, B-44, B-46, B-48, B-50 26478 . . . . . . . . . B-13 26479 . . . . . . . . . B-7, B-10 26481 . . . . . . . . . B-7, B-10 26482 . . . . . . . . .
PAGE 189
index up to 15,000 PSI (1000 Bar) 28673-0250404 . . . 28673-0350404 . . . 28673-0500404 . . . 28700 . . . . . . . . . 28702 . . . . . . . . . 28726 . . . . . . . . . 28731 . . . . . . . . . 28732 . . . . . . . . . 28779 . . . . . . . . . 28786 . . . . . . . . . 28797 . . . . . . . . . 28804 . . . . . . . . . 28806 . . . . . . . . . 28822 . . . . . . . . . 28826 . . . . . . . . . 28844 . . . . . . . . . 28844F . . . . . . . . 28844M . . . . . . . . 28844S . . . . . . . . 28852 . . . . . . . . .
PAGE 190
index up to 15,000 PSI (1000 Bar) 51156 . . . . . . . . . . 51162 (Series) . . . 51162-25 . . . . . . . 51162-50 . . . . . . . 51169 . . . . . . . . . . 51191 . . . . . . . . . . 51279 . . . . . . . . . 51285 . . . . . . . . . 51287 . . . . . . . . . 51288 . . . . . . . . . 51291 . . . . . . . . . 51292 . . . . . . . . . 51293 . . . . . . . . . 51294 . . . . . . . . . 51295 . . . . . . . . . 51296 . . . . . . . . . 51297 . . . . . . . . . 51298 . . . . . . . . . 51299 . . . . . . . . . 51300 . . . . . . .
PAGE 191
index up to 15,000 PSI (1000 Bar) INDEX 51746 . . . . . . . . . B -15, B-18, B-19, B-23, B-24, B-26, B-30, B-31 51748 . . . . . . . . . B-13 51749 . . . . . . . . . B-13 51750 . . . . . . . . . B-47 51755 . . . . . . . . . B-47 51760 . . . . . . . . . B-11 51765 . . . . . . . . . B-11 51766 . . . . . . . . . B-23, B-24, B-26 51767 . . . . . . . . . C-11, C-12 51769 . . . . . . . . . C-11, C-12 51770 . . . . . . . . . B-11 51775 . . . . . . . . . B-11 51779 . . . . . . . . . G-5 51785 . . . . . . . . .
PAGE 192
index 52858 . . . . . . . . . E-20 52859 . . . . . . . . . E-20 52861 . . . . . . . . . B-23, B-26, B-30 52862 . . . . . . . . . B-23, B-26, B-30 52864 . . . . . . . . . B-18, B-23 52865 . . . . . . . . . E-20 52866 . . . . . . . . . B-30 52869 . . . . . . . . . B-30 52870 . . . . . . . . . B-15, B-18, B-23, B-26, B-30 52871 . . . . . . . . . B-30 52872 . . . . . . . . . B-18, B-23, B-26 52873 . . . . . . . . . B-18, B-23, B-26 52875 . . . . . . . . . B-15, B-18, B-23, B-26, B-30 52878 . . . . . . .
PAGE 193
index up to 15,000 PSI (1000 Bar) INDEX 55033 . . . . . . . . . 55041 . . . . . . . . . 55042 . . . . . . . . . 55043 . . . . . . . . . 55044 . . . . . . . . . 55045 . . . . . . . . . 55046 . . . . . . . . . 55047 . . . . . . . . . 55048 . . . . . . . . . 55049 . . . . . . . . . 55050 . . . . . . . . . 55051 . . . . . . . . . 55052 . . . . . . . . . 55053 . . . . . . . . . 55054 . . . . . . . . . 55055 . . . . . . . . . 55056 . . . . . . . . . 55057 . . . . . . . . . 55080 . . . . . . . . . 55085 . . . .
PAGE 194
index up to 15,000 PSI (1000 Bar) Abrasive Injector Nozzle, E-31 Abrasive Blast Media, E-31 Abrasive Pot, E-31 Adapters — see Fittings Aeroquip Couplings, F-3 Air-Operated Diverter Valves, Dump Style, C-9 Shut-In, C-10 Anti-Seize, Thread, F-2 Anti-Vibration Fittings, see Fittings, Anti-Vibration Apparel, Safety, G-6 – 8 Backout Preventers, Pipe Cleaning Nozzle, E-14 Bags, Filter, C-19 Bareshaft Pumps — see UNx Bareshaft Pumps Barricade Tape, G-9 Belt Tension Gauge, B-55 Blue Goop, F-2 Body Protection, G-6
PAGE 195
index up to 15,000 PSI (1000 Bar) INDEX Fittings, Anti-Vibration, F-20 British Standard Pipe (BSP) Male, to Pipe Thread Male (NPT Male), F-12 to Pipe Thread Female (NPT Fml), F-13 Bushings, Reducing, F-6 Collars, Medium Pressure, F-19, F-20 Connection Specifications, British Standard Pipe (BSP), I-6 Jetstream HHP, I-4 Medium Pressure, I-7 Metric, I-5 Pipe Threads (NPT), I-2 – 3 Straight Boss, I-6 Type M, I-4 Couplings, Hammer Unions, F-5 Lug Style, F-3 Medium Pressure
PAGE 196
index Plugs, Jetstream HHP Male, F-15 Medium Pressure, F-19 Pipe Thread Male (NPT Male), E-17, E-18, F-8 Straight Boss, F-9 Quick Connect Couplings, Medium Pressure, F-3 Partek Style Quick Connect, F-3 Pipe Thread (NPT), F-2, F-3 Quick Connect, F-2, F-3 Screw Type Quick Connect, F-3 Twis-Lok, F-2 Type M, F-3 Reducing Bushings, Medium Pressure, F-18 Pipe Thread, F-6 Rigid Lance, F-5, F-19, F-20, F-21 Slimline Couplings, F-5, F-20 Straight Boss Male, to Pipe Thread
PAGE 197
index up to 15,000 PSI (1000 Bar) INDEX Nozzles — continued, MS Series, E-28 OR Series, E-5 – 7 ORS Series, E-5 – 6, E-8 Orbi-Jet, E-4 – 5 Orbi-Jet QCX, E-1 – 3 OX Series, E-2, E-6 – 7 P1 Series, E-6, E-8, E-11 P1S0 Series, E-6, E-8, E-11 P2TC Series, E-6 – 7, E-10 P4TC Series, E-6 – 7, E-10 Pipe Cleaning, E-6 – 8, E-10 – 18 Replaceable Tip, E-2 – 3, E-5 – E-12 RM Series, E-6 – 7, E-12, E-15, H-4 RMS Series, E-6, E-8, E-12, E-16 RotoMag, E-13 – 16 S Series, E-6, E-8, E-11 Sapphire, E-3, E-5 – 6,
PAGE 198
index UNx Fluid End – Model 4215HF (Gen II), B-18 UNx Fluid End – Model 4215N (Gen I), B-24 UNx Fluid End – Model 4215N (Gen II), B-23 UNx Fluid End – Model 4215QN, B-26 UNx Fluid End – Model 4515B (Gen I), B-31 UNx Fluid End – Model 4515B (Gen II), B-30 UNx Fluid End – Model 5015G, B-52 UNx Fluid End – Model 5015Q, B-23 UNx Fluid End – Jetstream Model 3020, B-19 UNx Fluid End – Jetstream Model 3620, B-17 UNx Fluid End – Jetstream Model 4220, B-17 UNx Fluid End – Jetstream Model 5020Q, B-15 UNx Fluid End S
PAGE 199
index up to 15,000 PSI (1000 Bar) UNx Bareshaft Pumps, Features and Benefits, B-1 – 2 Model 3015, B-11 – 13 Model 3615HF, B-8 – 10 Model 4215HF, B-5 – 7 Model 5020Q, B-3 – 4 UNx Fluid Ends, Features and Benefits, B-1 – 2 Model 3015, B-20 – 21 Model 3015B, B-36 – 37 Model 3015N, B-27 – 28 Model 3015Q, B-49 – 50 Model 3015W, B-47 – 48 Model 3115T, B-45 – 46 Model 3515Q, B-43 – 44 Model 3615HF, B-16 – 19 Model 3715B, B-34 – 35 Model 3715W, B-38 – 40 Model 3715WZ, B-41 – 42 Model 4015B, B-32 – 33 Model 4215HF,
PAGE 200
Jetstream has been recognized as the leading manufacturer of waterblast systems, pumps, accessories and replacement parts for over 20 years. Our proven product performance is driven by continuous R&D and supported by a dedicated engineering team and a worldclass manufacturing operation. All critical components are manufactured in-house to the highest quality standards. Parts are 100 percent inspected and performance tested before shipment to the customer.
PAGE 201
A Growing Nationwide Network of Service Centers Toledo, OH 888-415-7368 www.fssolutionsgroup.com Streator, IL 815-672-6028 Long Beach, CA 866-515-9891 Birmingham, AL 800-822-8785 Gonzales, LA 225-647-0660 La Porte, TX 832-674-8668 FS Solutions Ohio Service Center 1144 Expressway Dr. – South Toledo, OH 43608 PH: 888-415-RENT (7368) FS Solutions centers bring key resources closer to home.