User`s manual

User’s Manual B-2
Display Controller and Modes
Video Modes
The computer supports video modes defined in the table below. If your
application offers a selection of mode numbers that do not match the
numbers on the table, select a mode based on, resolution, number of colors
and refresh rates.
*Only External Monitor can perform change of Refresh Rate (Hz).
CRT Display
Resolution
Color Depth
(bpp)
Refresh Rate
(Hz)
800 × 600 16bpp 60, 75, 85, 100
32bpp 60, 75, 85, 100
1024 × 768 16bpp 60, 75, 85, 100
32bpp 60, 75, 85, 100
1280 × 800
1
1. Only for WXGA panel
16bpp 60
32bpp 60
1280 × 1024 16bpp 60, 75, 85, 100
32bpp 60, 75, 85, 100
1600 × 1200 16bpp 60, 75, 85, 100
32bpp 60, 75, 85, 100
1680 × 1050
2
2. Only for WSXGA+ panel
16bpp 60
32bpp 60
1920 × 1440 16bpp 60, 75
32bpp 60, 75
2048 × 1536 16bpp 60
32bpp 60
Some of display mode might not be supported depending on the external
monitor which you use.
If you are running some applications (for example a 3D application or video
playback and so on), you may see some disturbance, flickering or frame
dropping on your screen. If that occurs, adjust the resolution of display,
lowering it until the screen is displayed properly. You could also disable
Windows Aero™ to help correct this situation.