ASSEMBLY INSTRUCTION SKU CODE: (WF283525) | SAFETY WARNINGS |! This bed is designed for use Queen Mattress 2050 mm Long and 1530 mm Wide and total thickness is not exceeding 100mm. The dimensions for length and width must be stated numerically and may additionally be stated in conventional terms, for example, twin size, twin extra long, and the like. The maximum thickness of the mattress shall be stated Follow the information on the warnings appearing on the upper bunk bed end structure and on the carton.
Hardware List-BED 210 x40 mm Screws 1/4" x90 Wood dowel PCs PCs Wood Screws PCs 21/4" x 80 mm 21/4" x 13 mm 21/4" x 70 mm Hex-Head bolts PCs Horizontal-Hole bolts PCs Hex-Head bolts PCs Wood Screws PCs FA Allen Key 1pc Co Assembly Tools Required {Not Included) 04/09
STEP 1: ASSEMBLY HEADBOARD 3 1 Dowel 1 locate B2,B8 Wood Bar with B4 Wood Bar and Panels B3(x2) HW #2#7 Connect A1,A2 Legs with B2,B8,B5 Wood Bar HW #3 Connect B1 Wood Bar with Complementary on step 1.2) =Lock at detail view for more detail STEP STEP 1.2 STEP 1.
STEP 2: ASSEMBLY FOOT BOARD Dowel 1 locate B2,B8 Wood Bar with B7 Wood Bar and Panels B6{x2) HW #2,#7 Connect A3,A4 Legs with B2,B8 Wood Bar HW #3 Connect B1 Wood Bar with Frame(completed on step 2.2) -Look at detail view for more detail STEP 2.
STE P 3 . Following below illustration 2 ' -Using hardware #4,#5 and dowel #1 follow detail view to Assembly Headboard (Completed on step 1.
4x2pcs PCs) and Center Logs D4(x4) (x2) With Support Slats D3(x2) hardware #6 to Assembly Slats D1 STE P 4 Following below illustration Using hardware Look at detail view for more detail STE P 5 .
