ASSEMBLY INSTRUCTIONS TWIN OVER TWIN BUNKED WITH BOOKSHELVES AND DRAWERS SAFETY WARNINGS 1-Follow the information on the waning label appearing on the upper bunk bed and structure on the carton Do not remove waning label from bed 2-Amway use the recommended size mattress or mattress support, or both, 1o help prevent the likelihood of entrapment or falls. 3-Surface of mattress must be at least 5 inches below the upper edge of guard rails. 4-Do not allow children under 6 years to use the upper bunk bed.
Part List : WF282819 vo Front left leg Backseat log Front right leg “HL, HB-FB horizontal (upper) PCS HB horizontal (lower) 1PG Back right leg Front horizontal (upper / middle ) -PCS Front side rail 1 PG Back horizontal (upper / middies ) Back horizontal (lower) 1 PC Back side rail 1 -2PC8 Part List : WF282818 19] Top panel 1 PG [20] To Side left panel [21] NS Middle vertical panel Side right panel Right adjustable panel 3 PCS 24 Left adjustable pans 4 PCS IN = Front right vertical 1PC [14] Front horizontal
STEP NOTE: in thin tap, DO NOT titan ary bak NOTE: in this sop, DO NOT tighten ary bat unt you connect all pert together. unt you ert a er pe STEP NOTE: In the step.
SAFETY WARNINGS AND GENERAL NOTES: Follow the information on the warnings on the bunk bed end structure and on the carton. Do not remove the warning label from the bed. Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood of entrapment or falls. The top surface of the mattress must be at least 5* (127mm) below the upper edge of the guardrail. Do not allow children under 6 years of age to use the upper bunk.
