Users Manual

EM500-UDL User Guide
7
3.2 Wall Mounting
1. Attach the mounting bracket to the wall and drill. (Around 16mm)
Note: The connecting line of two holes must be a horizon line.
2. Drive two screws into wall at the marks using screw driver.
3. Mount the device on the wall.
3.3 Pole Mounting
1. Loosen the hose clamp by turning the locking mechanism counter-clockwise.
2. Straighten out the hose clamp and slide it through the rectangular holes in the mounting
bracket, wrap the hose clamp around the pole.
3. Use a screwdriver to tighten the locking mechanism by turning it clockwise.