Users Manual

EM500-UDL User Guide
23
For AU915:
64 channels numbered 0 to 63 utilize LoRa 125 kHz BW starting at 915.2 MHz and incrementing
linearly by 0.2 MHz to 927.8.
8 channels numbered 64 to 71 utilizing LoRa 500 kHz BW starting at 915.9 MHz and incrementing
linearly by 1.6 MHz to 927.1.
For CN470:
80 channels numbered 0 to 79 utilize LoRa 125 kHz BW starting at 470.3 MHz and incrementing
linearly by 0.2 MHz to 486.1.
16 channels numbered 80 to 95 utilize LoRa 125 kHz BW starting at 486.3 MHz and incrementing
linearly by 1.6 MHz to 489.3.
6.2 Device Settings
6.2.1 General
Location:
Ursalink ToolBox(PC): Device Settings → General
Ursalink ToolBox(APP): Device → Settings → General Settings
Device General Settings
Item
Description
Default
Device Type
Show the type of the device.
Null
Reporting
Interval
The sensor reports the sampling data at regular
intervals.
Range: 5-30 (mins)
10
Change
Password
Change the password used for changing device status
and writing configuration.
Disabled
6.2.2 Data Calibration
Location:
Ursalink ToolBox(PC): Device Settings → Data Calibration Settings
Ursalink ToolBox(APP): Device → Settings → Data Calibration Settings
Note:It is recommended to do the calibration before using the device.
Data Calibration Settings
Item
Description
Default
Enable
Enable calibration.
Disabled
Current Raw
Value
The current value.
Null
Distance/Level
Calibration
Enter the calibration value for distance/level.
Note: only two decimal is allowed.
Null
Final Value
Adjusted value.
Null
Abnormal Value
Enable abnormal value prevention.
Disabled