User Guide

ManualsBrandsUROVO ManualsOffice ElectronicsWiFi Thermal Receipt Mobile Printer, 80mm/3.1inch Paper Mini Wireless Portable Printer Compatible with Windows, iOS and Android, for Warehouse, Supermarket, Logistics, Home Use

Preface

Warning

Symbols & Conventions

Symbols below：

Misuse may cause damage to property human hurt or

even death.

Notice

Misuse may cause damage to product or human hurt.

Remark

Information for protecting the printer & Long time using.

Symbols on the printer itself: Safely Operation in non

tropical climate conditions.

The symbols and characters may be different with the real one.

Notice ‘portable printer’ is short for ‘printer’ in the manual

Please contact us if you find any losts or mistakes in the manual.

Do not copy, spread, transcribe or store the manual without formal permission.

This is a class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to

take adequate measures.

Icon area

Text description area

Display Instruction

Bluetooth mode

Wireless Communication/mode setting

Mode setting

Battery meter

Cover open

Printing/feeding

Out of paper

When printing or feeding, the icon will be displayed.

AC Adaptor

When the AC adapter is plugged in, the icon will be displayed.

Wireless communication/mode seting

Paper feeding Paper lacking

Cover open

AC Adaptor Battery meter

Icon Description :

Bluetooth connection, the

icon is inversed.

How to set,please read the

sixth part.

Text description area

The area displays the

relevant text information.

When paper loading is incorrect or lack of paper, the icon will be

displayed.

When cover isn't closed, the icon will be displayed.

The icon is used to indicate battery meter. When charging, the icon

flashing indicates the state of charge.

Please charged for the battery, when the battery meter is low.

Paper mounting

Notice the paper roll direction.It may not

print when in the opposite position.

After closing the cover, the print paper needs

to be exposed.

Remark

Starting up

Hold power button 3 seconds, printer starting

up.

Shutdown

Basic function

When sleeping, press Power button , open cover or if there's data transmission, printer will be waked up.

Automatic sleep/wake up

When the printer after Starting, 5 seconds without key operation or

data transmission, the printer will automatically enter the sleep state,

the screen display pictured to the right.

Feeding

zzzz

While running, hold power button 3 seconds, printer

shutdown.

When feeding, if there is a black mark or label, then the black

mark or label division line will stop at the outer of the paper.

Put the paper into the storage.

Follow paper exit direction, pull the

paper flange out. Then lock the

Press down the button to open

the cover.

Remove the seal on the

paper.

Press feeding button：　 feeding paper 10cm

Before using the printer, read the manual

User’s Manual

PORTABLE PRINTER

Safety instruction

Do not disassemble printer yourself.Please read the manual carefully before using.

Switch off when there's malfunction,unplug the charger and remove the battery if

printer's abnormal or have peculiar smell.

Do not use printer nearby gas station, fuel warehouse or other combustible material.

When charging, make sure the ambient temperature between -5℃~40℃, using our original

battery and power adapter. Using others' may result in damage to the printer, battery

leakage, fire or even explosion.

Do not open the cover when printing,to avoid printer damage.

After printing, Print head is still in a high temperature state, do not touch, so as not

to burn.

Please do not use benzene, thinner or alcohol, wipe the printer casing, Please do not use

chemical items with corrosive, as well as cleaning agent contact printer.Please gently

clean printer with soft cloth .

Notice

Warning

Using our original/recommended printing paper, to avoid bad influence on printing quality

or printhead damage.

Remove the battery when it becomes weak or when the unites is not in use for extended

period.

This will prevent damage to the unit from battery leakage at such times. Turn off the

printer before replacing the battery, when replacing if using battery cut off the power.

Using the printer between -10℃~50℃, the printing quality may be lower if out of compass.

The quality of paper may be direct or indirect influence on printing quality or storage

time, choose long lasting paper.

Follow below notes before use

Warning

Notice

Follow below notes to use battery

Before using please read this manual and details on battery.

Charge battery in proper ambient temperature, if temperature too high, battery may be heated,

unshaped or even fired.

Protect circuit units or others in the battery, do not diassemble the battery, otherwise short-circuit

may occur & electrolyte may go out. If electrolyte jumps into eyes, flush the eyes with water and send

to the hospital immediatly.

Do not squeeze,mechanical vibrate or shake the battery, short-circuit is not allowed.

Do not put battery into water, otherwise short-circuit may occur.

Do not expose the battery under sunshine, dusty or anywhere have much smoke.

Change battery when power's too weak to use.

Keep the battery away from children.

Stop using if battery's out of shape or color changed.

Warning

Before using read the manual and details on AC adaptor carefully.

Do not disaseemble or change AC adaptor, do not use AC adaptor if wire damaged, otherwise

electric may shock, fir or AC adaptor damage may occur.

Do not touch AC adaptor with wet hands, please cut off the power supply if charger's in

contact with water or other liquid.

Do not squeeze, mechanical vibrate or shake AC adaptor so much.

Do not use AC adaptor under high temperature, the equipment is not water resistance. Do not

wet the battery or kee it in the rain.

Hold the AC adaptor when unplug, otherwise wire may be damaged.

Keep the AC adaptor away from children, to avoid any kinds possible of dangers.

Follow below notes to use AC adaptor

Notice

Warning

Notice

Warning

Battery charge

Do not remove the battery when charging.

AC:100V～240V（50-60Hz)

Plug the AC adapter into AC socket and the DC Port

into the charging port of the printer.

Charging port

Thermal PaperBattery

For the first time using the battery, need to be

filled with electricity. After the battery is stored

for a long period of time, the battery will reach the

best use.

Battery installation, charging and paper loading.

Before Using

Remark

Warning

Notice

Remark

Charging: Power level blinking.

Charging completed: level full & stop blinking.

Battery is not loaded into the printer, in the factory.

1. Reveal the resist film on the battery contacts.

2. Use moderate force to close the battery.

It can print at the time of charging, but for

battery life considerations, please do not.

Please use our special designed power adapters,

use others may resultin damage to printers.

Setting

Save and exit: Press power button or 10 seconds do not operate buttons,Printer automatically save settings

and exit settings.

Darkness:

Here set the print density

Remark

PRINT SELFTEST

CFG

Print selftest: Press the feeding key to start

printing selftest.

Enter setup interface: After starting, press the setting button (non dormant state).

The upper left corner of

the screen appears:

icon . That

means the printer has

entered the setup state.

CFG

Basic settings

Language:

ENGLISH

中文

Here can set up the language type of operation

interface

LANGUAGE:ENGLISH

CFG

BT INFO

CFG

Bluetooth information includes: name, address,

and number of bytes received and sended.

NAME:HDT334

ADD:001259795966

RX:128 TX:8

Press the button to display

the Bluetooth information.

Setting key: Switch option

Setting key: Change options

DARKNESS 3

CFG

Selftest information

Selftest

Start

LocalName :

SN:1259795966

Model : XXXX

Firmware: V1.0

>> BLUETOOTH

BTAddress : 00:12:59:79:59:66

>> SYSTEM

>> USB

Mode:Printer

>> FONTS(13)

>> END.

urovo

>> RS232

Baudrate:115200

Format :8,N,1

Version : 3.1

80 Font 0#(Size 0-6)

84 Font 1#(Size 0)

88 Font 2#(Size 0)

89 Font 2#(Size 1)

8C Font 4#(Size 0-1)

8D Font 4#(Size 2-7)

90 Font 5#(Size 0-1)

91 Font 5#(Size 2-3)

94 Font 6#(Size 0)

98 Font 7#(Size 0-1)

02 Unicode Font 16

00 Unicode FastFont 24

01 Unicode Font 32

>> MODULE INFO

HARDWARE : 160-192-15

COMMAND : CPCL ESC

* Logo

Unique SN

SN:1259795966

Product

information

Font list

* BT Name

BT Addr

BT Ver

Model

Firmware

LocalName :

Model : XXXX

Firmware: V1.0

>> BLUETOOTH

BTAddress : 00:12:59:79:59:66

>> SYSTEM

>> USB

Mode:Printer

>> RS232

Baudrate:115200

Format :8,N,1

Version : 3.1

USB Mode

* Baud

Format

Remark

Press the operation of the selftest in the basic settings, Printer will print out the

selftest. The contents include: SN code, Model, Firmware, USB mode, RS232 info,

Bluetoothinfo, Fonts, command etc.

With * the project can change the content by setting the

software or printer setting.For more information, please

contact your supplier.

Selftest

WiFi communication (Only for WIFI version printer )

Communiation

Printer has two kinds of wireless communication mode.

Wireless：WiFi

Wireless：Bluetooth

Bluetooth communication

Bluetooth: Distance≤10M

WiFi communication distance: ≤20 meters

20 meters

Default pairing password:0000

Remark

Printer can provide single mode Bluetooth

2.1+EDR/CLASS Bluetooth 2 (10 m) and the Dual

mode Bluetooth 2.1+4.0 (BLE). The Dual mode

bluetooth in the 4 (BLE) mode can communicate

with Apple Iphone, iPad, iPod and Later model.

Pinter can provide 1 Wi-Fi communication with the BGN

IEEE802.11 wireless standard, support AP/Station mode,

supports wireless roaming, supports 5 SSID switching,

supports RC4/AES encryption, effective communication

distance of 20 meters.

Printer development DEMO can be from the official website Download

or claim from your supplier.

Fault diagnosis

When the printer prints only paper, no

print data

Print paper is installed in reverse. Please change the printing paper to a

direction

Print Bill in a few months or even a

few weeks, the handwriting is blurred

Printing paper quality is not good Please use the longer heat sensitive paper

Bills are stored in too high

temperature.

At room temperature (20 degrees C or

so) to deposit documents

Printer print indistinct

The printer for not cleaning up

pollution caused by dirt movement

Paper show color is Unqualified

Clean printer engine

Set Higher print density, or select the

paper with better color effect

Phenomenon Reason Method

Daily maintenance of printer

The use and preservation of printing paper

Maintenance and maintenance

1、

External printer and paper storehouse clean: please use twist dry wet cloth gently wipe the printer surface

and paper internal warehouse, pay attention to a damp cloth must be completely wrung.

2、

The printer engine clean: printer engine please provided must be clean, especially when the decline in the

quality of prining, cleaning methods are as follows: with cotton wool dipped in absolute alcohol wipe gently left

printer engine marked with thick black box parts, until the wipe clean so far.

3、

If you find the printer inside the water, please immediately shut down and remove the battery, and let printer dry

naturally.

4、

If you do not use the printer for a long time, please take out the battery alone.

1、The new purchase of print paper, please avoid direct sunlight or high temperature of the place to store,

save time, please do not tear the wrapping paper.

2、After printing the document, please keep the room temperature (20℃ or so) to save the light, so that it

can effectively extend the storage time of the documents.

3、If you need a long time to save the user documents, please choose a long-term thermal printing paper.

Note : the use of poor quality printing paper will lead to the printer in a short time.

Please enter our wedsite for more information.

http://en.urovo.com/