Mod. 1093 DS1093-038 DVR 4 CH /8 CH/ 16 CH H.264 CON VGA Sch. 1093/004A/008/016 H.264 4CH/ 8 CH/ 16CH WITH VGA DVR Ref. 1093/004A/008/016 DVR 4 CANAUX AVEC VGA Réf. 1093/004A H.264 4KANAL/ 8 KANAL/ 16 KANAL MIT VGA DVR TYP 1093/004A/008/016 DVR DE 4 / 8 / 16 CANALES H.264 CON VGA REF.
ENGLISH TABLE OF CONTENTS 1 General information ............................................................................................................................... 63 1.1 Product description................................................................................................................. 63 1.1.1 General features ............................................................................................................... .............................. 63 1.
4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 Manual Record ..................................................................................................................... 100 Stop Record.......................................................................................................................... 100 Start auto-sequence ............................................................................................................. 100 Start Cruise.........................................
1 GENERAL INFORMATION This document describes how to install and use the URMET Domus digital video recorder ref. 1093/004A 1093/008 1093/016. Read this manual which contains information for correct, safe use carefully. Keep this manual at hand so that you can refer to it when needed. 1.1 PRODUCT DESCRIPTION The URMET Domus S.p.A. product is a digital video recorder capable of recording from several cameras to internal hard disk. 1.1.
1.3 WARNINGS 1.3.1 POWER Only use the power unit provided to power the device. Check mains rating before plugging the power unit in. Do not pull the cable to unplug the device. Switch the device off before unplugging power unit. This operation must not be performed when the DVR is recording, playing or from the configuration menu. Stop recordings and playback in progress before disconnecting power from the device to prevent damaging the hard disk beyond repair. 1.3.
2 2.1 DESCRIPTION OF THE PARTS FRONT PANEL Ref.1093/004A (Closed lid) H.264 4CH Digital Video Recorder Ref.1093/004A (open lid) Ref.1093/008 (closed lid) Ref.1093/008 (open lid) Sch.1093/016 NOTE The USB port on the front panel is not intended for the connection of the provided mouse.
SCH.1093/004A 1093/008 PARTICULAR DETAIL DESCRIPTION Power Led: indicates that the device is powered HDD Led: indicates that the hard disk is in use (read/write) IR Sensor: I.R. signals receiver for remote command CH1 Button: button for full screen display of camera 1 images. (only for Ref. 1093/004A) CH2 Button: button for full screen display of camera 2 images. (only for Ref. 1093/004A) CH3 Button: button for full screen display of camera 3 images. (only for Ref.
SCH.1093/016 PARTICULAR DETAIL DESCRIPTION Button: in the configuration menu, it moves the cursor upward. EDIT Button: used to select. It allows the access to the pop-up menu and to the sub menus. It is the confirm button of the configuration menu. Button: in the configuration menu it moves the cursor downward. menu. MENU/ESC Button: used to access/exit the configuration menu or to go back to the previous . Used to access the pop-up menu.
2.2 REAR PANEL Ref.1093/004A Ref.1093/008 Ref.1093/016 PARTICULAR DETAIL DESCRIPTION Power on / power off switch. Power supply plug: use the provided adapter to supply the device. BNC connectors for Video output: connect here the monitor. BNC connector for CH1 / CH2 / CH3 / CH16 channel Video input : connect here cameras. 75 (4 Inputs are available on Ref. 1093/004A 8 inputs on Ref. 1093/008 16 inputs on Ref. 1093/016) VGA Audio output: used to connect Audio devices (only for Ref.
16 ways terminal strip for RS485/Sensors/Alarm: this is the connector to which input sensors, alarm output and RS458 line are connected. (only for Ref. 1093/008) (See details in the following page) 24 ways terminal strip for RS485/Sensors/Alarm: this is the connector to which input sensors, alarm output and RS458 line are connected. (only for Ref.
RS485/Sensor/Alarm port Sch.1093/004A Pin 1: RS-485A Pin 2: RS-485B Pin 3-4: Sensor 1 input Pin 5-6: Sensor 2 input Pin 7-8: Sensor 3 input Pin 9-10: Sensor 4 input Pin 11-12: Alarm Output RS485/Sensor/Alarm port Sch.1093/008 Pin -: RS-485A Pin +: RS-485B Pin 1-2: Sensor 1 input Pin 3-4: Sensor 2 input Pin 5-6: Sensor 3 input Pin 7-8: Sensor 4 input Pin 9-10: Alarm Output RS485/Sensor/Alarm port Sch.
2.3 IR REMOTE CONTROL Although the remote control handset supplied with the appliance is designed to be as robust and practical to use as possible, please handle with the due care and attention. Do not: expose to rain, spill any liquids on the keypad or drop in water subject to violent knocks or drop on hard surfaces expose to sunlight introduce obstacles between the remote control and the appliance while using the remote control.
IR REMOTE CONTROL FOR REF.
2.3.1 BATTERIES The remote control is powered by two size AAA batteries (included). To install, slide the battery compartment cover open and insert in the compartment respecting the polarity shown. Close the cover after inserting the batteries. Point the remote towards the DVR receiver to use it. Dispose of used batteries correctly in specifically provided special collection bins. the IMPORTANT NOTE Always change both batteries at the same time.
3 3.1 Press DVR BOOT UP POWER ON AND OFF on the back of the unit. The PWR LED on the front panel will light up. The following will appear on the monitor. The system will boot-up and start initializing. 3.2 MAIN INTERFACE After finishing system initialization the system will enter into main interface. Picture is the main interface displayed by system, which is showing no video input status. Once there are video inputs, the interface will display live images from the cameras.
4 DVR CONFIGURATION POP UP MENU After finishing system initialization, click right key of mouse on main interface mode to enter into Pop-up Menu. Now you could proceed parameter setting and operate for Main Menu, Menu Lock, Video Search, PTZ, Start record, Stop Record and also operate for Start Cruise after successful PTZ parameter setting etc. 4.1 MAIN MENU PREVIEW Color set Camera Dwell time display Recording Network Search Playback Rec.
4.2 MAIN MENU After clicking right button of mouse, pop-up menu will be displayed on the screen. You can click [main menu] button on pop-up menu to enter into Main menu interface. You can also use the Menu button on the front panel to bring up the window, when using the front panel buttons use the FWD and REW button to move in the menu, and the SEL button to select the icon. You use the ESC button to return to previous window.
4.2.2 RECORD SETUP Click [Main Menu] [Record] to enter into [Record Setup] menu. [Record] option allows you set up recording status (Enable/Disable) of each channel. [Audio] option allows you turn audio on/off. [Quality] include three options Best, Good and Normal. [Pack time] indicates maximum continuous record time (15, 30, 45 and 60 min). [Frame rate] include two options Fixed and Manual. When set to Manual and click [Frame rate setup] option, you may allocate the frame rate for each channel.
MAXIMUM RECORDING TIME WITH 500GB HARD DISK The following list contains recording maximum times with 500GB HD for 4 / 8 / 16 recording channels. 1093/004 DVR 4ch. Resolution/Frame Rate HDD Duration (days) Best Quality Better Quality Good Quality D1@12.5FPS 14 19,5 24,5 HD1@25FPS 12 16,5 24,5 CIF@25FPS 16,5 23 29 1093/008 DVR 8ch. Resolution/Frame Rate HDD Duration (days) Best Quality Better Quality Good Quality D1@6.25FPS 11 15 17 HD1@12.
4.2.3 NETWORK SET Enter into [Main Menu Network Setup] to setup the network configuration: After selecting network mode - such as DHCP, PPPOE or static allocation- and setting up web ports,you can visit DVR remotely through a network or internet. DNS: DNS server is generally provided by local ISP. Herein please enter the IP address of your DNS. Note: When there are multiple DVRs at the same LAN, you need to change the MAC address.
Server: select a Dynamic domain name server provided by ISP; Host Name: Input host name registered from Dynamic Domain Naming System, for example: DVR2009.3322.org; User Name: Input a user name registered before applying for a domain name; Password: Input a password you set when registering a user name. Routers Port Forwarding Port forwarding is required when you want to access the DVR connected to the router from outside of the routers network. 1.
4.2.4 RECORDING SEARCH Click [Main menu search] to enter into [Video Search] menu Channel: allows you select the channel you want to search Time Search: In the Video Search screen, user can search for a specific date and time for a recording and view it in Playback mode. This is useful for hunting a specific recording of an incident if you know the date and time it occurred. Date Search: In the Video Search screen, user can search for all the recordings in a specific date.
If you select embedded DVD recorder, backup will be started after clicking [OK] button. When backup processing ends, system will prompt you Backup success! . Picture 5-15 Picture 5-16 When the backup is completed you will be notified. Please click [OK] button to save your backup. Backup file will be in H264 format, you can convert it to AVI format using the Multimedia Player program that comes with the DVR or through the net-viewer program, so you can use any player which supports AVI format.
4.2.6 DEVICE MANAGEMENT Options in device management include HDD, Alarm, PTZ, Mobile, Motion and Serial set. Click [Main Menu Device Management] option to enter into the window. 4.2.7 HDD MANAGEMENT In the [Device Management] screen, highlight and click [HDD] icon to enter into the window.
ALARM SET 4.2.8 Click [Main Menu Device Alarm] to enter into the below window. Channel select: the option allows you select one channel you want. I/O Status: allows you select the three options NO (Normal Open), NC (Normal Close) and OFF. Set to Normal Open, I/O status Alarm will be activated while sensor is ON; set to Normal Close, I/O status alarm will be activated while sensor is OFF; set to OFF, I/O status alarm will not be triggered.
4.2.9 EMAIL SETUP On the [EMAIL] screen, when Enabling [Email] option, you can set its parameters. Click [Email Set] to enter into the interface. SSL: is a security link transport protocol. You can encrypt your communication info (including your email) using SSL to prevent hackers from monitoring your email or communication info and even your password. Generally Gmail.com server set SSL to [On], and other mail server to [Off].
Explanation: When configuring the messages sent via e-mail (Main menu Devices Alarms), to ensure the correct operation it is suggested to configure a user account (that is sender address and password) with the same address as the SMTP Server. For example, if an address like mario.rossi@dominio.it is used, the SMTP must be smtp.dominio.it. 4.2.
[CH]click [Pull-down] menu to select the channel you need to monitor. [Connect]click the button to enter into the live image of the channel you selected [Setup]click the button to allow you set parameter of the mobile viewer. Function buttons in the bottom from Left to right in turn are:[PTZ Direction (left, right, up, down)]: Area Selection (ZOOM+, ]: Iris (I+,I -) )]: [Snapshot].
7) Click [Asee] icon to run the program, and then you will enter into the interface. (Function buttons in the bottom in turn are:) 1 CH 1; CH 2; CH3; CH 4 2 PTZ Direction :left, right, up, down PTZ Lens control: Focus+/-, Zoom+/- and Iris+/- from left to right in 3 turn. Play Bar: Play/Pause, Full screen, Snapshot, Setup, Next CHs 4 Group and Quit button from left to right in turn Note: The snapshot images will be saved to the defaulted path-File manager\Images.
7) 8) 9) 10) Channel select PTZ Direction ( left, right, up, down) Area Selection: ZOOM+, ZOOMFocus: (focus +, focus-) Aperture: I+,I -). 12) Function buttons from left to right in turn are: Play/Pause, Snapshot, Setup, Next CHs Group and Help. NOTE We have introduced Monitor point setting in the previous Sybian and Windows system setting. The setting method for Iphone is same as the Sybian and Windows system. Please refer to the previous section.
3 4 Set and run Blackberry mobile viewer: The Blackberry viewer will be installed to the [Downloads] directory. Enter into the [Downloads] directory, and then click the [Asee] icon. The blackberry mobile viewer has two versions, including RTSP and MP4: RTSP: allows you proceed relative operation through screen icon, and the version is applicable to WIFI connection.
3.3 Click [Save] or [Enter] respectively to apply the parameter and return back the previous menu. 3.4 Click [History] or [List] button to open the history record shown as. 3.5 Highlight any [History] record and right-click the mouse to open/edit/delete the record. 6 Click [Next Page] icon to search [Channel] option, and then choose the channel you want to display.
10 Click [Close] button to exit the program Note: upgrade the blackberry operate system to 5.0 or upper version. 4.2.12.5 Androids Mobile Please make sure the software environment support on your Android Mobile, such as Apkinstaller. 13. Make sure your mobile have been connected to network and could download the software. a) b) c) Enter into [Program] option and highlight [E-market] icon. Enter into the [E-market] interface.
f) g) h) i) j) Enter into [Program] file and click [Apkinstaller] icon. Find the Asee.apk file you want to install. Click the software to install to your phone shown as. Enter into [Program] option to click [Asee] icon. Enter into [Asee] main interface. k) Setting Menu 1 3 5 6 CHs Select 2 PTZ Direction Zoom+/4 Focus+ Iris +/Function buttons from left to right in turn are: Play/Pause, Snapshot, Setup, Next CHs Group and Help. Address: Enter the IP address of the DVR Port: Enter the Mobile Port No.
4.2.13 MOTION DETECTION Click [Main Device Motion] to enter into the [Motion Detection] menu. The [Motion detection] Menu has three sections, including Channel Status, Sensitivity and Motion area. Channel STATUS: This option allow you enable motion detection on any channel. SENSITIVITY: This option allows you to set sensitivity level of motion detection from 1 to 4 with 4 being the most sensitive. MD AREA: This option allows you select the area you want to be sensitive to motion.
4.2.17 PASSWORD Set the system password if you want to use one. The new passwords will be available after clicking [APPLY] button. If User Level is selected, it is possible to set the User Permission pressing the relative button.. Note: DVR supports max. 7 users (i.e. admin + 6 users) The default password for administrator/user is customizable. When you set Password Enabled to ON firstly, you can setup a user password and administrator password respectively.
Privacy Zone Privacy Zones (up to 4 per channel) can be enabled/disabled by selecting ON/OFF for each channel. It is possible to select, for each camera, 4 privacy zones that can be moved, enlarged or reduced according to requirements (SETUP). 4.2.19 LANGUAGE Enter into [System Language] menu to select the language you want to use on the DVR and click [APPLY] button. The selection will be available after system Auto restarts. 4.2.
4.2.21 MAINTAIN Enter into [Main menu System Maintain] menu to reset the DVR parameters to factory default settings, update system software (firmware), and set system automaintenance. Auto Maintain: When opening auto-maintain function, you can setup system to restart regularly. System Update: Copy the file named with dvrupgrade to U flash drive; and connects U flash drive to USB port of DVR, and then click [System upgrade] menu.
4.3 MENU LOCK Considering a system safety feature you can click [Menu Lock] menu to lock menu when leaving the DVR. If you want to login to the DVR, you would input device code and password. Common user only has the authority to search recordings, but Administrator has full authority over Main Menu operations. Any user can start and close manual record on the non-record mode. 4.4 SPLIT MODE The model displays 16 live images in the sequence of single, 4-split, 9-split and 16-split modes.
4.5 PTZ CONTROL We introduced setting PTZ parameters previously in chapter 5.2.6.3. Here we will discuss how to operate PTZ controls. Pop up the Pop-up Menu to highlight and enter into [PTZ control] menu. Now user can control the camera with Pan, Tilt and Zoom capabilities. Click [Zoom-/+] button to zoom in / out the image; Click [Focus -/+] button to focus the image; Click [Iris -/+] button adjust iris to open or close.
4.7 PIP MODE PIP display is one kind of live display mode, including 1x1 display modes and 1x2 display modes. 1x1 display mode 4.8 VIDEO SEARCH 4.9 MUTE 1x2 display mode Click Pop-up Menu to quickly enter into [Video Search] Menu. We have introduced how to search and playback video record in previous section. Details please refer to section 5.2.4 Video Search. You can control volume open or close by clicking the [Mute] option. 4.
4.14 MONITOR SELECTION This Function allows to control the OSD Menu switching between BNC video Output and VGA Video Output. It is possibile to switch the Osd Menu on video Output, using Mouse(i.e. selecting the relative Video Output from Pop-up Menu), using Remote Control (i.e. Selecting 0 Key) or DVR front Panel (i.e. see the instructions below). Sch.
4.15 PLAYBACK PLAYER 1 2 Copy backup file to your PC; Open Playback Media Player, and then click [+] button to open the file. 3 Select the playback file you desired from the file Note: Please select the file with *.264 format or *.nvr. The record file backed-up by U flash disk or removable disk is with *.264 format, and DVD Recorder with *.nvr format. 4 Open backup file Double-click the record event at the right side to start record file playback.
The button functions from left to right in turn are as follows: [Play] button: start playing record file [Pause] button: pause the record file playback [Stop] button: stop the record file playback [Rewind] button: rewind playing the record file at X2, X4, X8 and X16 speeds. [Forward] button: forward playing the record file at X2, X4, X8 and X16 speeds. [Frame by frame]: Play the record file frame by frame. [Snapshot]: click the button to capture the record image and save the image to a specified position.
4.16 WATERMARK SOFTWARE PLAYER This Software allows the Video Playback with enabled Watermark function. Install the Software and launch it. Here follow the instructions in order to play a stored video into PC or USB DVR Backup: Click OPEN Button and select video file. Click the PLAY Button. Click WATERMARK Button in order to enable/disable Watermark function displayed as for picture above. It is possible to use the others Player functions (i.e. Pause Stop F.
4.17 PLUG-INS DOWNLOAD AND INSTALLATION FOR WEB LOGIN 1. 2. 3. Open your web browser and input the IP address and web port of DVR; If your computer is connected to internet, you will be prompted to download and install ActiveX Control; You may have Windows Security Alert that attempts to block this with the windows Firewall. In that case, click [Unblock] button to continue your installation processing. 4.
4.19 WEB AND URMET NETVIEWER CLIENT SOFTWARE INTERFACE After successful logging-in web client, you will enter into the Live interface and simultaneously Audio / Video will be automatically connected well. 4.19.1 MENU BAR Menu bar include [Live], [Playback], [Remote setting], [Local Setting] and [Logout] option and [Language select] option on the upper-right corner. 4.19.1.1 Live screen After PC Web Client logging in, system will be defaulted to enter into Live mode and connect audio.
PTZ Control 1) 2) 3) 4) 5) 6) 7) 8) 9) PTZ direction control: the buttons allows you control PTZ moving direction. Zoom, Focus and Iris control: the buttons allows you control PTZ moving direction, zoom, focus and iris. Preset bit control Pan & Tilt Pos: indicates starting point you desire to cruise firstly. Set: allow you set a series of specific preset points of a PTZ camera. (Detailed settings please refer to section 5.5 PTZ control).
4.19.1.2 Playback Click [Playback] option to playback record files from remote DVR by selecting relevant date, channel and type. Double-click any file listed or highlight any file and click [Play] button to play the selected recording file. Also can select channel and file type. Click [download] to download and save selected recording file to specified saving path. It is only possible to download the file after that the playback is stopped.
Channel Parameters Default enter channel setting menu, you can setting remotely and save on the DVR: Click [Copy Setting to] option on the right-bottom corner of the interface to copy all the remote setting to any channel showna bove.
Record setting Enter into [Record Setup] option to set record control parameters, including record enabling, audio enabling, Pack time, Record mode and Frame,Quanlity, Resolution etc. If Frame rate is adjustable, you can setup Picture Quality and Frame rate for each chanel.
Select [Schedule] mode in record setting then can setup record mode on the form which are the same method on DVR menu Alarm Parameters Click [Alarm Parameters] option to enter into the Alarm Config interface, which include I/O Status,Video cover, Video loss, HDD loss ,HDD space, Prerecord and Alarm time. Also can setup Email alarm and Full screen enlarge when in Alarm.
Network Parameters Click [Network] option to enter into [Network setting] menu, including [Basic character], [PPPoE], [DDNS], and [Email set] DS1093-038 112
DS1093-038 113
Device Parameters Click [Device] option to enter into the interface. Now you can check Hard disk info, PTZ Parameters, Mobile info and Motion. Click[PTZ Parameters ] to setup PTZ control the setting are same with DVR menu.
Mobile phone setup: the same with DVR menu setup. ClickMotion Detectionto setup each channel parameters: including Sensitivity and Motion Area. The sam with DVR menu setup.
System management Extend [System] option to enter into sub menus System setting, User Authority , DST(Daylight saving time) and DVR information.
Click [User] to setup Authority, Log-in name and password for different user. DST setting.
DVR system information. 4.19.2 LOCAL SETTING The option allows you set [Record Save Path], [snapshot Save Path] and [File Save Path]. Note:Record save path --- Save file of remote manual record from netwok File save path --- Save download recording file from DVR 4.19.
APPENDIX: ACTIVE X INSTALLATION If the installation of an ActiveX component is required, follow the procedure below. Before performing the connection to the PC, activate IE protection configuration, following the procedure below: Double click the icon to open Internet Explorer browser. The following display will appear (or, however, the default page). Double click the icon . The screen Internet Properties will appear. Select the area Trusted sites. Click the item Sites DS1093-038 .
The following screen will appear: Add the device IP address in the field. Add this website to the zone. Click the button Add. The following confirm screen will appear. NOTE Do not select the item: Require server (https:) verification for all sites in this zone. Click repeatedly OK to finish. Install Active X.
5 SPECIFICATIONS (PAL FORMAT) Feature Characteristics 1093/008 1093/004A Compression formats Video Inputs/outputs Audio I/O 1093/016 Video: H.
