Specifications

3 DVR FUNCTIONS
3.1 MANUAL RECORDING
Press “REC” on the front panel of the device in LIVE mode.
A password must be entered by default.
The following login window shown in the following figure will appear.
Figure 32: login page
Pres ► panel to enter the default password.
Now
A se
press “ME
eIM R
ess “SHIFT” to go back to default functions. The STATUS
• Do not lose or forget the programmed password.
• Take note of the new password and keep it in a safe place.
• It will not be possible to access the device in local mode (i.e. using the front panel) if an alphanumeric
password is chosen (using the dedicated software).
The following window will appear:
s “◄ ” to point the cursor to “Password” and then use the number keys on the front
, press “ENTER” twice to confirm and access the menu.
quence of three beeps lasting for approximately 3 seconds will be heard if the entered password is not correct. In this case,
NU” and enter the password again.
PO TANT NOTE
• THE DEFAULT PASSWORD IS “12345”.
• It is advisable to change the default password to prevent intrusions.
• To enter/edit the password, remember to press “SHIFT” (make sure that the STATUS LED lights up) followed
by the number keys. At the end of the operation, pr
LED will go out.
Figure 33: recording menu for device Ref.1093/066
ted item is highlighted. The selec
o point the cursor to the various menu items.
eIMPORTANT NOTE
• The device will resume recording only recording tasks programmed in the Recording menu after a blackout.
Recordings started manually will not be resumed after a blackout.
3.1.1 CHAN
This item (not selectable) lists all the channels of the device.
Press arrows “◄►” t
Press “ESC”. to quit the menu.
DS1093-013 45