Specifications

2.2.1.2 Select camera
This option is used to select the camera on which to edit the recording and configuration settings. Use “▲▼” to select the
camera. The respective camera will appear in the “Camera name” field (assigned in the “camera” → “name” field).
2.2.1.3 Resolution
This menu option is used to set the resolution type to be reached for recording on the selected camera. In general, Urmet DVR
DVS devices are capable of supporting, according to the model, the following recording resolutions: “DCIF” “2CIF”, ”CIF”, and
“QCIF”. Use “▲▼” to select the resolution type.
Correspondence between code and respective resolution in PAL format are shown in the following table.
CODE RESOLUTION - PAL
2CIF 704x288
CIF 352x288
QCIF 176x144
Table 2: correspondence between code and PAL resolution
Ref.1093/064 (4 channel video/audio looping H.264 2CIF/CIF)
The following resolution options can be selected on Urmet DVR DVS ref.1093/064:
 “2CIF”, ”CIF” and “QCIF” on all channels
Ref.1093/065 (8 channel H.264 2CIF/CIF)
The following resolution options can be selected on DVR DVS ref.1093/065:
 “2CIF”, ”CIF” and “QCIF” on all channels
Ref.1093/066 (16 channel video/audio looping H.264 2CIF/CIF)
The following resolution options can be selected on DVR DVS ref.1093/065:
 “2CIF”, ”CIF” and “QCIF” on all channels
2.2.1.4 Bit rate
This option is used to set the bit rate (fixed bit rate) or max bit rate (variable bit rate) to be used. Possible options are: “32 kbps”,
“48 kbps”, “64 kbps”, “80 kbps”, “96 kbps”, “128 kbps”, “160 kbps”, “192 kbps”, “224 kbps”, “256 kbps”, “320 kbps”, “384
kbps”, “448 kbps” “512 kbps”, “640 kbps”, “768 kbps”, “896 kbps”, “1 Mbps”. Use “▲▼” to select. A numeric character input
bar will appear when the “user” option is selected.
Use the number keys 0÷9 on the front panel to enter a character.
e the cursor.
to 8192 can be entered.
DVS devices.
ragraph for settings.
“1/16”, “1/8”, “1/4”, “1/2”, “1”, “2”, “4”, “6”, “8“, “10”, “12”, “16”, “20” and “25”.
upation, to the detriment of recording quality (less fluid sequences). Selecting a lower frame-rate will save
The maximum frame rate value depends on the set resolution.
Use the arrow buttons “◄►” to mov
Press “EDIT” to delete a character.
A numeric value from 32
eIMPORTANT NOTE
It is advisable to exceed 1 Mbps for all Urmet DVR
Refer to the “Frame rate” pa
2.2.1.5 Frame rate
The number of frames stored for each selected camera second can be selected using this item.
Possible options are:
Use “▲▼” to select.
A high frame-rate corresponds to films played back in real time with more fluid sequences. A lower frame-rate saves time in terms
of hard disk space occ
hard disk space.
eIMPORTANT NOTE
REF. 1093/064 REF. 1093/065-066
RESOLUTION
Max frame rate
Pe el r chann
Max.
Recom ed bit mend
rate
Max frame rate
Per el chann
Max.
Recom it mended b
rate
2CIF 16 fps 1 Mbps 6 fps 512 kbps
CIF 25 fps 1 Mbps 12 fps 512 kbps
QCIF 25 fps 256 kbps 25 fps 256 kbps
2.2.1.6 Enable rec
This option is used to enable or disenable selected camera recording. To enable, select the respective check box using “◄►”
Symbol “” indicates that the recording option is enabled; symbol “×” indicates that it is not.
and press “ENTER” or “EDIT”.
DS1093-013 39