User manual

DS1093-039 68
14.3.3 MODIFYING A USER
To modify a user:
1. Enter the User Settings menu by clicking Menu > Settings > User.
2. Select user to modify.
3. Click the Modify button to enter the Modify menu, shown in Figure 9.
Figure 9. Modify User Menu
4. Edit user information.
5. To modify user permissions, click on the privileges button. Permissions settings are defined in the section
above, Adding a New User.
6. Click the OK button to exit menu.
14.4 MANAGING SYSTEM
Configuration information from your DVR can be exported to a USB device and imported into another DVR. This will allow you to
efficiently setup the same configuration on numerous DVRs.
To import or export DVR configuration:
1. Enter the Import/Export Configuration menu, shown in Figure 10 by clicking Menu > Maintenance >
Configuration.
Figure 10. Import/Export Configuration Menu
2. Click Export to export a configuration file to USB device. USB device must be connected at this point to the
DVR.
3. To import a configuration file, select the file from the USB device and click the Import button. After the
import process is completed, you must reboot the DVR.
4. Click Cancel to exit out of menu.