User manual

DS1093-039 51
10.7 CONFIGURING SERVER AND HTTP PORTS
If you would like to change the server and HTTP ports from the default settings, you can do so in the Network Settings menu. The
default server port is 8000 while the default HTTP port is 80.
To change the default ports:
1. Enter the Network Settings menu by clicking Menu > Setting > Network.
2. Select the Advanced tab.
3. Click the Set button next to Host/Others to enter the Host/Others menu.
4. Enter new Server Port and HTTP Port, as shown in Figure 11.
Figure 11. Host/Others Menu
Note: The Server Port has a port range of 2000-65535 and is used for remote client software access. The HTTP port is
used for remote internet browser access.
10.8 CONFIGURING E-MAIL SETTINGS
To configure E-mail settings:
1. Enter the Network Settings menu by clicking Menu > Setting > Network.
2. Select the Advanced tab.
3. Click the Set button next to E-mail to enter the E-mail menu. The E-mail menu is shown in Figure 12.
Figure 12. E-mail Menu
4. Enter e-mail settings. Please refer to Figure 12 for details.
5. In advanced tab of email menu, enable Attached JPEG File if you want to send email with alarm images,
the interval is the time of two adjacent alarm images.
6. Set SMTP Port and SSL if needed.
7. Click the OK button to save and exit the E-mail menu.
Note: It is recommended that the e-mail settings be tested after they are entered. This can be accomplished by clicking
the Test button in the E-mail menu.