User manual

DS1093-039 42
9.4 DETECTING VIDEO LOSS
Your DVR can be setup to detect video loss and trigger an action. To setup video loss detection:
1. Enter Camera Settings menu by clicking Menu > Setting > Camera.
2. Select camera under Channel # to configure video loss detection for and click the Set button.
3. Select the Advanced tab.
4. Check the Video Loss Detection checkbox to enable feature, as shown in Figure 11.
Figure 11. Camera Settings Menu
5. Click the Handle button to enter the Exception Handle menu, shown in Figure 12.
6. Select the Handle tab to configure exceptions handling. Exception trigger options are further explained in
the next section (See Understanding Exception Trigger Options).
Figure 12. Exception Handle Menu
7. Select the Schedule tab. Set the schedule of when you want video loss detection to be enabled. Schedule
can be set for all week or any day of the week with up to 8 time periods per day.
8. Click the Apply button to finish.
9. Repeat above for other channels.