User manual

DS1093-039 41
2. Select the output you would like to configure and click the Set button. This will bring up the settings page
for the selected channel (Figure 9).
Figure 9. Alarm Output Settings
3. Configure the settings for selected output.
4. Select OK to save and exit.
Note: If the Hold For option is selected as Manually Stop, the alarm will only stop when you manually stop it (See
Triggering Alarm Outputs Manually).
9.3 TRIGGERING ALARM OUTPUTS MANUALLY
You may also trigger alarm outputs manually through the Manual Alarm menu.
To trigger alarm outputs manually:
1. Enter the Manual Alarm menu (Figure 10) by clicking Menu > Manual Alarm.
Figure 10. Manual Alarm Menu
2. In the Manual Alarm menu, you may:
• Trigger: Select an alarm from the list and click Trigger to trigger its output.
• Trigger All: Trigger all alarm outputs at once.
• Clear All: Stop all alarm outputs at once.
3. Select OK to return to the previous menu.