User manual

DS1093-039 39
9.2 SETTING UP SENSOR ALARMS
Recordings can also be triggered from an external sensor alarm device. To setup sensor alarms:
1. Enter into the Alarm Management menu by navigating to Menu > Setting > Alarm, shown in Figure 5.
Figure 5. Alarm Management Menu
2. Select the Alarm Input # and click the Set button. This will open the Alarm Input Setting menu, shown in
Figure 6.
Figure 6. Alarm Management Settings
3. Set the alarm input type under Type. The options available are Normally Opened (N.O.) and Normally
Closed (N.C.).
4. Check the checkbox next to Setting and click the Handle button to enter the Alarm Input Handle menu.
5. Select the Triggered Camera tab.