User manual

DS1093-039 22
5.5 CONFIGURING LIVE PREVIEW DISPLAYS
Live Preview displays can be customized to your own needs. These settings can be accessed by entering the Display
Settings menu.
Figure 4. Display Settings
Note: Spot out only has a window division.
To access the Display Settings menu:
1. Click the MENU button.
2. Click the Setting icon.
3. Click the Display icon.
The settings available in this menu include:
• Video Output: Designates the output to configure the settings for. Outputs include Main Vout and Auxiliary Vout.
• Mode: Designates the display mode to be use for Live Preview (Spot out only one window).
• Dwell Time: The time in seconds to dwell between switching of channels when Start Sequence is selected in Live
Preview.
• Camera Order: The order of the cameras to be used in the selected display mode (See Setting Camera Order).
• Enable Audio Output: Enable/disable audio output for the selected video output.
• Event Output Port: Designates the output to show event video on.
• Event Dwell Time: The time in seconds to show event screen.
• Post Event Display: It is now possible to set for how long the event channel (Motion Detection, Alarm, Video Loss,
Tampering) will be displayed in full screen on the alarm monitor even after the event has stopped (post event display).
It is possible to define the duration in the range 0s - 30s.
Note: DVR will automatically detect if a VGA display is connected. If VGA is connected, main CVBS won’t show you any
image. If VGA is not connected, main CVBS will show you main GUI.
Note: VGA can’t work together with Main CVBS