User manual

DS1093-039 10
4. DIRECTION/ENTER Buttons:
• DIRECTION Buttons: The DIRECTION buttons are used to navigate between different fields and items
in menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded
video. The Left and Right button will jump 30s backward and forward in a video. In Preview mode, these
buttons can be used to cycle through channels.
• ENTER Button: The ENTER button is used to confirm selection in any of the menu modes. It can also be
used to tick checkbox fields. In Playback mode, it can be used to play or pause the video. In Single Play
mode, pressing the ENTER button will advance the video by a single frame.
5. JOG SHUTTLE Control: The JOG SHUTTLE control can be used to move the active selection in a menu.
The inner ring will move the selection up and down; the outer ring will move it left and right. In the
Playback mode, the outer ring is used to jump 30s forward/backward in video files. The inner ring can be
used to speed up/slow down the video. In Preview mode, it can be used to cycle through different
channels.
6. POWER Button: The POWER button is used for power on or power off the DVR.
Note: It is important to note that you must click the EDIT button on either the remote or front panel on a text field before
you’re able to edit its content. After you’re done entering text, you must hit the ENTER button to be able to move on to
the next field.
2.2 REAR PANEL
Figure 2. Rear Panel Diagram
No. Item Description
VIDEO OUT
BNC connector for video output. If VGA is connected, the interface will not function. If VGA is not
connected, the interface is used as the main video output with local video display and menu
operations.
1
VIDEO SPOT
OUT
BNC connector for monitor. Single window view.
2 VIDEO IN BNC connectors for analog video input.
3 AUDIO IN RCA connectors for analog audio input.
4 AUDIO OUT RCA connector for audio output. This connector is synchronized with VIDEO OUT.
5
Video LOOP
OUT
16-ch DB15 connector for video loop out
6 VGA VGA output. Display local video output and menu.
7 RS232 DB9 connector for RS232
8 LAN Interface Connector for LAN (Local Area Network).
9 USB Interface Connector for USB devices.
10
RS-485
Interface
Connector for RS-485 devices. T+, T- pin connects to PTZ.
Connector for KB devices. D+, D- pin connects to special keyboard.
ALARM IN Connector for alarm input.
11
ALARM OUT Connector for alarm output.
12 GROUND Ground(needs to be connected when DVR startup)
13 POWER AC 100~240V