System information

digiset 5
Urma AG, Switzerland www.urma.ch page 50
8.3.2.9 "Line 1 -Line 2" measurement (L1 - L2)
The intersection point of both measuring lines (line 1 and line 2)
is determined.
8.3.2.10 "Line 1 - Line 2 - Point X" measurement (L1 - L2 - PX)
The vertical axis is touched at one point and shown as a red
measuring line. The intersection point of the two other measur-
ing lines is on the horizontal axis.
The contour is aligned to its optimum level when the pointers on
both adjustment bars are exactly in the middle.
8.3.2.11 "Line 1 - Line 2 - Point Z" measurement (L1 - L2 - PZ)
The horizontal axis is touched at one point and shown as a red
measuring line. The intersection point of the two other measur-
ing lines is on the vertical axis.
The contour is aligned to its optimum level when the pointers on
both adjustment bars are exactly in the middle.
8.3.2.12 "Point X - Point Z" measurement (P1 - PZ)
The horizontal and vertical axes are touched at one point and
shown as red measuring lines.
The contour is aligned to its optimum level when the pointers on
both adjustment bars are exactly in the middle.
Linie 2
Linie 1
Linie 1
Punkt X
Linie 2
Linie 1
Punkt Z
Linie 2
Punkt X
Punkt Z