System information

digiset 5
Urma AG, Switzerland www.urma.ch page 27
6.2.3 Brightness (optional)
In the "Black/White" operating mode the "Brightness" function is used to adjust the
brightness of the live picture.
You access this operating mode using the following menu steps:
Main menu Sub-menu 1 Sub-menu 2
Setup
Ö
Imaging
Ö
Brightness
You also can start the "Brightness" function by right clicking (con-
text menu) when the mouse pointer is placed on the live picture.
6.2.4 Inverse tool
You access this operating mode using the following menu steps:
Main menu Sub-menu 1 Sub-menu 2
Setup
Ö
Imaging
Ö
Inverse tool
This menu item works as a toggle function and changes the setting of a normal tool
with cuts outwards to an "inverse tool" with cuts inwards, such as is the case with bell
tools. The "Inverse tool" setting only works with the "Maximum" measuring method.
6.2.5 Imaging parameters
You access this operating mode using the following menu steps:
Main menu Sub-menu 1 Sub-menu 2
Setup
Ö
Imaging
Ö
Parameter
The following parameters can be set using the rough setting slider.
• Line length
• Line deviation
• Radius deviation
The object to be measured must be moved until it is in camera
range.
6.2.5.1 Line length
You use line length to set how long a line must be before it is detected by TCAM2 as
a line.
The sensitivity can be varied from 0.000 mm to 3,000 mm.
The standard setting (default) is 1,020 mm.