System information

digiset

Urma AG, Switzerland www.urma.ch page 11

6. Flip the Digiset to its

normal horizonta posi-

tion and mount the

screen to the metal

frame and connect ca-

bles (Pic. 7 and 7b) ac-

cording to the number

tags.

7. Check once again whether all ca-

bles are pluged correctly.

8. Connect the unit with the transformer and put the power cord to the power

supply

9. Remove the security screw from the top of the tower

10. Switch on the unit and start with the basic settings

NOTE:

Never place the device in the immediate vicinity of the following machines and

devices:

EDM machines

Electrical welding equipment

Circuit breakers and switches

Electrostatic painting systems and similar fixtures

Pic. 7

Pic. 7b

Pic. 7