User's Manual

43
8. Set alarming time to inform you that an applicable event will be open.
(Alarming time screen); None, 1 day prior, 30 minutes prior and 15
minutes prior are available, where you can select an exact time option
you want. After a time option is selected, press Select. You don t need to
specify details as in alarm types or birthday event.
9. Finally, specify the type of alarm to inform you that an applicable event will
be open. There are 2 types of alarm available.
a. Visual:
Uses blinking light to operate the alarm.
b. Ring & visual: Uses sound and light to operate the alarm.
Select a desired alarm type and press Select to finish all the procedures.
The following icons will be displayed on the icon bar of the upper screen
when you specify the alarm.
The screen of event alarm is as shown below;
Note: The sound of the time alarm is different from that of the event alarm.
When a call is received while an alarm operates, the alarm will stop
till the call is finished. In the beginning the alarming bell will go on
for 1 minute, and then for 5 minutes if not stopped by user. After the
third bell, the alarm will stop then.
3. Organizer