Owner Manual

Page 2 of 2
Avoiding stains and damage:
Although suggested sealing will enhance the protective barrier on your MIXX product,
concrete is a naturally porous material, which is prone to absorption. It is very important to
be mindful of the product’s properties and follow a few simple steps:
• Clean your MIXX product using water and mild soap (i.e. dish soap). Do not use
heavy abrasive, bleach-based or ammoniated cleaners. Use of such cleaners will
wear down the protective barrier and result in less stain resistance. We do not
recommend use of most natural cleaners (which are often citrus based), as this type
of cleaning agent is typically highly acidic and can damage the product.
• Do not allow oil, grease or acid-based liquids to sit on the product surface. Wipe
it up immediately.
• Bring product inside or protect with a waterproof furniture cover during very cold
or freezing temperatures as moisture that freezes may expand and create cracks.
• Do not allow salt to build up on your product as it can corrode the product over
time. In highly corrosive environments, we suggest you wipe down the product
regularly and more frequently seal the product with a paraffin-based wax.
• Do not place hot objects (i.e. hot pans and dishes) directly on the product. The
direct heat can break the protective seal and discolor the product, altering the
existing patina.
• Do not allow water, snow or ice to build up on the surface of your product. During
freezing temperatures, water will expand into ice, which crack the concrete.
• If a chip or crack develops, you can easily repair your MIXX product by using
concrete patch to fill the void and rebuild corners.