Instruction Manual
12
FLUID-INSTALLATION, EXCHANGE AND BAG RESET
Insert the fluid container into the compartment
as shown in the picture
Connect the female metal plug connector to the fluid in let hose male connector until you hear the “click”
of the metal plug (pictures above), then close the unit’s plastic cover.
Press and hold the RESET button until a “beep” is emitted from the buzzer.
Metal plug
Connect the female metal plug connector to
the fluid in let hose male connector until you hear
the “click” of the metal plug (pictures above),
then close the unit’s plastic cover.
Press and hold the RESET button until a “beep”
is emitted from the buzzer.
13