Uptime Solutions Confidential 2020 MistLX Model 2000 USER GUIDE Version 2.
Uptime Solutions Confidential 2020 Contents 1. 2. 3. Introduction ........................................................................................................................3 Key Features ......................................................................................................................4 Overview .............................................................................................................................5 Analog Conditioning ................................
Uptime Solutions Confidential 2020 1. Introduction The MistLX unit is an advanced wireless monitoring system that integrates environmental sensors into a small form factor battery powered housing. The unit runs stand alone with batteries. The battery pack is field replaceable. High performance, high temp non-rechargeable lithium batteries are employed in the design. The wireless unit communicates with the base station via a short range BlueTooth radio version 4.0.
Uptime Solutions Confidential 2020 2. Key Features MistLX has the following features: ❖ Wireless connectivity using BlueTooth radio technology. ❖ Water and weatherproof durable casing sealed to IP67 standards. ❖ Anti caustic casing made from stainless 316 or Aluminun and corrosion resistant plastics. ❖ Battery operation. ❖ High temp design 175F. ❖ Battery monitoring features. ❖ Multi-year battery life depending on configuration.
Uptime Solutions Confidential 2020 3. Overview An overview of the MISTLX unit is shown in the figure below. The input AC signals pass through a conditioning block, then to an A/D converter, and then are placed into system memory. The Digital Processing block collects sampled data and provides additional functions such as decimation and frequency analysis. The system controller communicates over the radio interface to send and receive commands and data.
Uptime Solutions Confidential 2020 Analog Conditioning The analog conditioning block is shown in the figure below. This circuit is duplicated once per analog input. AC signals come from the internal accelerometers and then pass through filtering before being converted by a high precision A/D converter. The digital samples are filtered and decimated before being stored to memory.
Uptime Solutions Confidential 2020 4.
Uptime Solutions Confidential 2020 5. Z Direction Z Direction The Z direction is always from the top toward the base of the unit. If the unit is mounted on the floor of a room, for example, the Z direction is toward the floor. If the unit is mounted on a wall, the Z direction is toward the wall. Example of mounting on top of Machine.
Uptime Solutions Confidential 2020 6. BlueTooth Radio Specification The Bluetooth v4.0 Compliant Protocol Stack for Single-Mode BLE Solution The Bluetooth Module is v4.0 Compliant for Single-Mode BLE solutions. It operates at 2.4Ghz with 4dbm output power.
Uptime Solutions Confidential 2020 7. Battery Considerations All features of the MistLX unit can be enabled whether on battery power or DC power. Some advanced operational modes are not recommended when on battery power. The unit is capable of sampling long time domain waveforms and can sample continuously. In battery operation, this will deplete the battery quickly. 8. Recommend Operating Conditions Temp Operational Temperature range is 0 – 175F.
Uptime Solutions Confidential 2020 9. FCC/CA Approvals This unit Contains FCC ID:2ADT3BA2000 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
