User`s guide

They are displayed both on the Traffic Function page,

and on the Custom Map when traffic is turned on.

Operation

The controls at the bottom of the screen allow you to

zoom in and out, turn the traffic identifiers on/off (Label),

and to select each traffic target on the screen.

1. Press the

FN key to reach the Function page showing

the

TRAF “smart” key.

2. Press

TRAF (Traffic).

3. Press the

IN key to zoom in. Press the OUT key to zoom

out.

4. Press the

LABEL key to turn the Identifier over each

Traffic item on or off.

5. Press the

SELECT key to step through each Traffic item

that is shown on the display. When a target is selected,

additional information about that target is shown in the

upper right corner of the display. The selected target

will be highlighted in green on the display. Surface

targets cannot be selected.

Detailed Operation

Surface Target