User`s guide

Auto Zoom

Auto Zoom is activated by adjusting the zoom level to the

far extremes of the zoom range. When activated, the

indicated zoom level will change from a number to the

text ‘AUTO’.

While in the Auto Zoom mode, the screen will

automatically adjust the current zoom level to maintain

the current ‘TO’ waypoint on the screen. When

approaching the waypoint, the zoom level will not drop

below 1 nm. When the waypoint is reached and the next

waypoint in the flight plan becomes active, the zoom level

will automatically adjust to bring that waypoint on the

map.

To exit the autozoom mode, simply increase or decrease

the current zoom level to re-enter the manual adjust

mode.

Pan

The Pan keys are used to move the display around so you

can see beyond the

initial boundaries of

the screen. The

PAN

function key is one of

the “smart” keys

available at the

bottom of the screen.

When you select the

Pan function, four

“arrow” keys appear

on the right side of

the screen next to the

LINE SELECT keys.

Move the map in the

desired direction by pressing the

LINE SELECT key next to

the arrow that shows you want the map to move. Press the

PAN key again to exit the Pan mode. While panning, a

Detailed Operation