Instructions / Assembly

3. Assembling the center Leg Base.
4. Assembling the frame to the Base.
Take Part #Q and insert it between the 2 Part #N pieces, secure
together with screws and washers Part #J and K. (Connect it to
the longer side of the Part #N.) Attach the 2 parts Part #D onto
both Part #N pieces, secure together with screws and washers
Part #J and K.
Attach the 2 parts Part #A to the both sides onto Part #D of the middle
leg base. Lay the assembled part on the ground.
Attach the leg extensions to the leg base and tightly secure together
with screws and washers Part #J and K. Continue doing the same to
all 4 leg bases.
Q
N
N
D
J
K
K
J
K
D
K
O
P
2. Connect the middle leg supports to the legs.
E
D
D
N
Q
N
D
A
A
Frame assembly installation for model UBRTG01-1017
MM
B1
45.3
44.88
B2
45.3
B1
44.88
B2
Connect Part #P and Part #O together. Once it is attached, connect
it to the legs by inserting it between part #D leg extensions. Secure
it to the legs with Screws Part #M, (The part #P and part #O should
be placed 16” above the ground.) Continue doing the same to all 4
legs bases.