Uponor Logic for Plumbing is about moving water from point A to point B flawlessly. • Most flexible • Easy to use • Unique, superior fittings • Smart and intuitive installation • Raising industry standards • Peace of mind Plumbing Systems www.uponor-usa.
Uponor Plumbing Systems Intelligent design. Tailored solutions. Ultimate performance. Moving water flawlessly and efficiently is just the beginning. Our crosslinked polyethylene PEX-a tubing is quickly becoming the industry standard. Uponor’s Wirsbo AQUAPEX® PEX-a tubing is flexible and easy-to-use. Our unique ProPEX® fittings let installers work without torches, glues or solvents. Our experienced design and field support staff is available to assist you on the phone or directly on the jobsite.
Uponor Plumbing Systems Uponor Extends 2" Wirsbo AQUAPEX® Offering Uponor expanded its Wirsbo AQUAPEX® offering to include 2" tubing along with a complete line of 2" fittings, tools and accessories. The offering includes Uponor’s exclusive ProPEX® fittings along with the ProPEX 200 Battery Expander Tool. The following table is a complete listing of all 2" Wirsbo AQUAPEX products. These products are also listed throughout the catalog in their respective categories. Part No. Part Description Each Qty. Pkg.
Uponor Plumbing Systems Wirsbo AQUAPEX Tubing Wirsbo AQUAPEX tubing is used in hot and cold potable water distribution systems and Uponor residential fire safety systems. Wirsbo AQUAPEX tubing is suitable for use in hydronic heating applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the tubing. Wirsbo AQUAPEX tubing coils and straight lengths are a natural color.
Uponor Plumbing Systems 2" Wirsbo AQUAPEX Expansion Joint Kit includes two ProPEX Brass Elbows (Q4712000) and four ProPEX Rings (Q4682000). Part No. Part Description F8052000 2" Wirsbo AQUAPEX Expansion Joint Kit Coil/Pallet List Price/Ea. 1 $326.00 Part No. Part Description F1930500 ¹⁄₂" Wirsbo AQUAPEX tubing, 20-ft. straight length, 500 ft. List Price/Ea. $308.70 F1930750 ³⁄₄" Wirsbo AQUAPEX tubing, 20-ft. straight length, 300 ft. $317.50 F1921000 1" Wirsbo AQUAPEX tubing, 20-ft.
Uponor Plumbing Systems Wirsbo AQUAPEX plus — Red Tubing Straight Length Wirsbo AQUAPEX plus — Blue Tubing Coil Wirsbo AQUAPEX plus — Blue Tubing Straight Length Plumbing Systems Pre-sleeved Wirsbo AQUAPEX Tubing 120 Part No. List Price/Ea. F2930500 ¹⁄₂" Wirsbo AQUAPEX tubing plus — Red, 20-ft. straight length, 500 ft. $308.70 F2930750 ³⁄₄" Wirsbo AQUAPEX tubing plus — Red, 20-ft. straight length, 300 ft. $317.50 F2921000 1" Wirsbo AQUAPEX tubing plus — Red, 20-ft. straight length, 200 ft.
Uponor Plumbing Systems EP Multi-port Tees EP Branch Multi-port Tee features ³⁄₄" ProPEX inlet with ¹⁄₂" ProPEX branch outlets. The tee is made of EP, which is proven in demanding hot-water applications. EP Branch Multi-port Tee Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Q2237550 ³⁄₄" EP Branch Multi-port Tee, 3 outlets Each Qty. Pkg. Qty. List Price/Ea. - 10 $14.40 Q2247550 ³⁄₄" EP Branch Multi-port Tee, 4 outlets - 10 $20.
Uponor Plumbing Systems EP Branch Opposing-port Multi-port Tee EP Branch Opposing-port Multi-port Tee features a ³⁄₄" ProPEX inlet with opposing ¹⁄₂" ProPEX branch outlets. These are designed for central location to facilitate piping in two directions. The tee is made of EP, which is proven in demanding hot-water applications. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. EP Flow-through Roll-out Multi-port Tee Part Description Each Qty. Pkg. Qty. List Price/Ea.
Uponor Plumbing Systems EP Branch Multi-port Elbow features an integrated ³⁄₄" or 1" ProPEX elbow inlet with ¹⁄₂" ProPEX branch outlets. The elbow is designed for commercial plumbing applications, and eliminates the need for multiple connections. The elbow is made of EP, which is proven in demanding hot-water applications. EP Branch Multi-port Elbow Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Each Qty. Pkg. Qty. List Price/Ea.
Uponor Plumbing Systems ProPEX EP Coupling ProPEX EP Coupling makes PEX-to-PEX connections. Note: ProPEX Tool is required. ProPEX Rings sold separately. ProPEX EP Elbow Part No. Part Description Pkg. Qty. Case Qty. Q4773838 ProPEX EP Coupling, ³⁄₈" PEX x ³⁄₈" PEX 25 100 List Price/Ea. $1.25 Q4775050 ProPEX EP Coupling, ¹⁄₂" PEX x ¹⁄₂" PEX 25 100 $1.30 Q4775075 ProPEX EP Coupling, ¹⁄₂" PEX x ³⁄₄" PEX 25 100 $2.60 Q4777575 ProPEX EP Coupling, ³⁄₄" PEX x ³⁄₄" PEX 25 100 $1.
Uponor Plumbing Systems ProPEX EP Reducing Tee makes diverting connections for Wirsbo AQUAPEX tubing in supply and return mains. Branch size is listed last in the part description. ProPEX EP Reducing Tee Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Q4755575 ProPEX EP Reducing Tee, ¹⁄₂" PEX x ¹⁄₂" PEX x ³⁄₄" PEX Pkg. Qty. Case Qty. 25 100 List Price/Ea. $5.95 Q4757555 ProPEX EP Reducing Tee, ³⁄₄" PEX x ¹⁄₂" PEX x ¹⁄₂" PEX 25 100 $2.
Uponor Plumbing Systems ProPEX EP Swivel Closet Adapter (with plastic nut) connects ³⁄₈" or ¹⁄₂" Wirsbo AQUAPEX tubing to water closet. ProPEX EP Swivel Closet Adapter Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. Case Qty. Q4340375 Q4340500 List Price/Ea. ProPEX EP Swivel Closet Adapter, ³⁄₈" PEX x ⁷⁄₈" Ballcock 25 100 $2.80 ProPEX EP Swivel Closet Adapter, ¹⁄₂" PEX x ⁷⁄₈" Ballcock 25 100 $2.
Uponor Plumbing Systems ProPEX Brass to Polybutylene (PB) Coupling transitions PB tubing to Wirsbo AQUAPEX tubing. Product does not include the crimp ring for the PB side of the coupling. ProPEX Brass to Polybutylene (PB) Coupling Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. Case Qty. Q4585050 Q4587575 List Price/Ea. ProPEX Brass to PB Coupling, ¹⁄₂" PEX x ¹⁄₂" PB 25 100 $4.70 ProPEX Brass to PB Coupling, ³⁄₄" PEX x ³⁄₄" PB 25 100 $8.
Uponor Plumbing Systems ProPEX Brass Tee makes diverting connections for Wirsbo AQUAPEX tubing in supply and return mains. Branch size is listed last in the part description. ProPEX Brass Tee Note: ProPEX Tool is required. ProPEX Rings sold separately. * * * Part No. Part Description Pkg. Qty. Case Qty. Q4705050 ProPEX Brass Tee, ¹⁄₂" PEX x ¹⁄₂" PEX x ¹⁄₂" PEX 25 100 List Price/Ea. $5.25 Q4707575 ProPEX Brass Tee, ³⁄₄" PEX x ³⁄₄" PEX x ³⁄₄" PEX 25 100 $8.
Uponor Plumbing Systems ProPEX Brass Male Threaded Adapter connects Wirsbo AQUAPEX tubing to male NPT threads and are intended as transition fittings from metal to PEX. ProPEX Brass Male Threaded Adapter Note: ProPEX tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. Case Qty. Q4523850 List Price/Ea. ProPEX Brass Male Threaded Adapter, ³⁄₈" PEX x ¹⁄₂" NPT 25 100 $3.50 Q4525050 ProPEX Brass Male Threaded Adapter, ¹⁄₂" PEX x ¹⁄₂" NPT 25 100 $2.
Uponor Plumbing Systems ProPEX Brass Fitting Adapter transitions Wirsbo AQUAPEX tubing to copper fittings. ProPEX Brass Fitting Adapter Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. Case Qty. Q4503850 ProPEX Brass Fitting Adapter, ³⁄₈" PEX x ¹⁄₂" Copper 25 100 List Price/Ea. $2.80 Q4505050 ProPEX Brass Fitting Adapter, ¹⁄₂" PEX x ¹⁄₂" Copper 25 100 $2.00 Q4505075 ProPEX Brass Fitting Adapter, ¹⁄₂" PEX x ³⁄₄" Copper 25 100 $3.
Uponor Plumbing Systems ProPEX DZR Brass Coupling makes PEX-to-PEX connections. DZR fittings are safe for direct burial in soil. ProPEX DZR Brass Coupling Note: ProPEX Tool is required. ProPEX Rings sold separately. * * Part No. Part Description G4547575 ProPEX DZR Brass Coupling, ³⁄₄" PEX x ³⁄₄" PEX EP Each Qty. Pkg. Qty. - 10 List Price/Ea. $8.30 G4541010 ProPEX DZR Brass Coupling, 1" PEX x 1" PEX EP - 10 $11.60 G4541307 ProPEX DZR Brass Coupling, 1¹⁄₄" PEX x ³⁄₄" PEX - 10 $19.
Uponor Plumbing Systems ProPEX DZR Brass Reducing Tee makes diverting connections for Wirsbo AQUAPEX tubing in supply and return mains. Branch size is listed last in the part description. DZR Brass Fittings are safe for direct burial in soil. ProPEX DZR Brass Reducing Tee Note: ProPEX Tool is required. ProPEX Rings sold separately. * * * * * * * Part No. Part Description Each Qty. Pkg. Qty. List Price/Ea. G4701317 ProPEX DZR Brass Reducing Tee, 1¹⁄₄" PEX x 1" PEX x ³⁄₄" PEX - 10 $58.
Uponor Plumbing Systems ProPEX DZR Brass Sweat Adapter transitions Wirsbo AQUAPEX tubing to copper pipe. DZR Brass Fittings are safe for direct burial in the soil. ProPEX DZR Brass Sweat Adapter Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description G4517575 ProPEX DZR Brass Sweat Adapter, ³⁄₄" PEX x ³⁄₄" Copper Each Qty. Pkg. Qty. List Price/Ea. - 10 $10.30 G4511010 ProPEX DZR Brass Sweat Adapter, 1" PEX x 1" Copper - 10 $13.
Uponor Plumbing Systems ProPEX Red Brass Coupling ProPEX Red Brass Coupling makes PEX to PEX connections. Highly resistant to the affects of aggressive water conditions, published research has repeatedly demonstrated that the red brass is generally regarded as immune to dezincification and stress-corrosion cracking. Note: ProPEX Tool is required. ProPEX Rings sold separately. ProPEX Red Brass Male Threaded Adapter Part No. Part Description V4543850 ProPEX Red Brass Coupling, ³⁄₈" PEX x ¹⁄₂" PEX Pkg.
Uponor Plumbing Systems Compression Stop Valve is chrome-plated and available in angle or straight stop configurations. Stop valves are used for point-of-use shut-off at the fixture. Both valve styles connect ¹⁄₂" Wirsbo AQUAPEX tubing to ³⁄₈" o.d. risers. Brass Compression Stop Valve Note: Compression inserts and rings are included. Only use stainless steel inserts supplied by Uponor with these compression stop valves. Substitution can result in valve connection failure. Part No. Part Description Pkg.
Uponor Plumbing Systems Brass ProPEX to Copper Ball Valve ProPEX to Copper quarter-turn Ball Valve (brass) features a shut-off valve for ³⁄₈", ¹⁄₂" and ³⁄₄" Wirsbo AQUAPEX tubing to ¹⁄₂" and ³⁄₄" copper pipe. This fitting is not compatible with applications using glycol. Note: ProPEX tool is required. ProPEX Rings sold separately. Brass ProPEX to ProPEX Ball Valve Part No. Part Description Q4803850 ProPEX Ball Valve (large bore), ³⁄₈" PEX x ¹⁄₂" Copper Adapter Pkg. Qty. Case Qty. List Price/Ea.
Uponor Plumbing Systems Lav and Closet Risers are installed with delrin ring (included). Risers Note: Uponor recommends Riser Washers for hot-water applications. Part No. Part Description Each Qty. Pkg. Qty. F1072512 ³⁄₈" O.D. x 12" Lav Riser - 100 List Price/Ea. $1.20 F1072520 ³⁄₈" O.D. x 20" Lav Riser - 100 $1.70 F1072530 ³⁄₈" O.D. x 30" Lav Riser - 100 $2.25 F1072536 ³⁄₈" O.D. x 36" Lav Riser - 100 $2.90 F1082512 ³⁄₈" O.D. x 12" Closet Riser - 100 $1.35 F1082520 ³⁄₈" O.D.
Uponor Plumbing Systems Engineered Plastic (EP) Valved Manifolds Improve the ease and quality of your plumbing installations with the EP Valved Manifold by Uponor. Made from advanced engineered plastic (EP) materials, it is the only valved manifold on the market that can offer what’s really important to a plumber — total flexibility and serviceability. The manifolds can be joined to other EP Valved Manifolds using manifold couplings, and can be supplied with ³⁄₄" or 1" ProPEX inlets.
Uponor Plumbing Systems EP Valved Manifold Accessories ProPEX EP Valved Manifold Inlet connects ³⁄₄" and 1" Wirsbo AQUAPEX tubing to the manifold. The EP Valved Manifold End Cap seals the unused inlet on the manifold. EP Valved Manifold ProPEX Inlet Note: ProPEX Tool is required. ProPEX Rings and Assembly/Mounting Brackets are required and sold separately. Part No. Part Description Q2120750 EP Valved Manifold ³⁄₄" ProPEX Inlet Each Qty. Pkg. Qty. List Price/Ea. - 10 $10.
Uponor Plumbing Systems EP Valveless Manifolds EP Valveless Manifold The EP Valveless Branch Manifold is available with ³⁄₄" or 1" inlets and 4, 6 or 8, ¹⁄₂" ProPEX outlets. The manifold is made of engineered plastic (EP), the same durable material used in Uponor’s EP fittings. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Each Qty. Pkg. Qty. List Price/Ea. Q2200400 EP Valveless Branch Manifold, 4 outlets, ³⁄₄" ProPEX 1 - $34.
Uponor Plumbing Systems ProPEX Copper Manifolds ProPEX 1" Copper Branch Manifold features ¹⁄₂" ProPEX outlets brazed to manifold trunk. Sweat manifolds together to create the desired number of outlets. Do not exceed acceptable flow rates for 1-inch nominal copper. ProPEX 1" (type L) Copper Branch Manifold Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Each Qty. Pkg. Qty. List Price/Ea.
Uponor Plumbing Systems ProPEX 1" (type L) Copper Valved Manifold ProPEX 1" Copper Valved Manifold features ¹⁄₂" ProPEX valve connections allowing for simple and easy isolation of individual loops. Sections can sweat together to extend the number of outlets using a standard 1" copper coupling. Both 1" ends are copper pipe size and require a copper end cap, coupling or transition fitting to make the proper system connection. Do not exceed accepted flow rates for 1-inch nominal copper.
Uponor Plumbing Systems The D’MAND® Hot Water Delivery System is an integral part of the Uponor plumbing layout, which is designed to maximize energy and water savings, minimize connections, and reduce hot water delivery times. The D’MAND hot water delivery system provides two different system pumps: Model 100 and Model 200. The Model 100 supports plumbing systems with the farthest fixture less than 100 feet from the pump location.
Uponor Plumbing Systems ProPEX Accessories ProPEX Water Heater Adapter (stainless steel) connects ³⁄₄" PEX to water heater. ProPEX Water Heater Adapter Note: ProPEX Tool is required. ProPEX Rings sold separately. ProPEX Washing Machine Outlet Box Part No. Part Description Q2957575 ProPEX Water Heater Adapter, ³⁄₄" PEX x ³⁄₄" FIP x 18" Each Qty. Pkg. Qty. List Price/Ea. - 20 $19.80 ProPEX Washing Machine Outlet Box comes with two ¹⁄₂" ProPEX hot and cold color-coded valves.
Uponor Plumbing Systems ProPEX Ice Maker Box with Support Brackets comes with one ¹⁄₂" ProPEX valve. The valve has a ¹⁄₄" O.D. compression connection for connecting to standard ice maker tubing. The two support brackets make mounting the box quick and easy. ProPEX Ice Maker Box with Support Brackets Note: The cover plate for this ice maker box is sold separately. ProPEX Tool is required. ProPEX Rings sold separately. Part No.
Uponor Plumbing Systems ProPEX Tools and Accessories ProPEX 200 Battery Expander Tool Kit and Accessories The ProPEX 200 Battery Expander Tool is an electro-hydraulic tool with microprocessor-based intelligence that makes fast, easy connections to ³⁄₈" through 2" Wirsbo AQUAPEX tubing. The tool kit includes a 1¹⁄₂" pistol for making connections to ³⁄₈" through 1¹⁄₂" tubing, a 2" pistol with a 2" H-series Expander Head for making connections to 2" tubing.
Uponor Plumbing Systems ProPEX Air (pneumatic) Expander Tool expands ³⁄₈", ¹⁄₂, ³⁄₄" and 1" Wirsbo AQUAPEX tubing using the ProPEX connection method. Kit includes ¹⁄₂" head, lubricant, carrying case and 4 oz. bottle of pneumatic oil. ProPEX Air Expander Tool Kit Note: ³⁄₈", ³⁄₄" and 1" Expander Heads sold separately. Part No. Part Description Each Qty. Pkg. Qty. List Price/Ea. Q6301000 ProPEX Air Expander Tool Kit 1 - $1,223.35 Q6301010 ProPEX Air Expander Oil, 4 oz.
Uponor Plumbing Systems ProPEX Expander Head Standard ProPEX Expander Heads are used on all ProPEX Expander Tools. Note: The ProPEX Expander Heads are not compatible with the APR Blunt Expander Tool. H-series ProPEX Expander Head Part No. Part Description Each Qty. Pkg. Qty. List Price/Ea. Q6310375 ³⁄₈" ProPEX Expander Head 1 - $141.70 Q6310500 ¹⁄₂" ProPEX Expander Head 1 - $128.80 Q6310750 ³⁄₄" ProPEX Expander Head 1 - $128.80 Q6311000 1" ProPEX Expander Head 1 - $128.
Uponor Plumbing Systems Tubing Supports Plastic Bend Support (glass-reinforced nylon) provides rigid 90-degree bend and sleeve for ³⁄₈", ¹⁄₂" and ³⁄₄" Wirsbo AQUAPEX tubing. Plastic Bend Support Note: A5250500 also works in conjunction with A5750500 – PEX Wall Support Bracket on page 151. Part No. Part Description A5150375 ³⁄₈" Plastic Bend Support Each. Qty. Pkg. Qty. - 25 List Price/Ea. $1.35 A5250500 ¹⁄₂" Plastic Bend Support - 25 $1.40 A5150750 ³⁄₄" Plastic Bend Support - 50 $2.
Uponor Plumbing Systems Plastic Drop Ear Bend Support Plastic Drop Ear Bend Support (glass-reinforced nylon) provides rigid 90-degree bend and connection-free stub out from a stud wall or floor for ³⁄₈" or ¹⁄₂" Wirsbo AQUAPEX tubing. Part No. Metal Drop Ear Bend Support Pkg. Qty. Case Qty. List Price/Ea. F5200375 ³⁄₈" Plastic Drop Ear Bend Support 25 250 $2.60 F5200500 ¹⁄₂" Plastic Drop Ear Bend Support 25 250 $2.
Uponor Plumbing Systems Plastic Wall Support bracket provides rigid straight-through support for ¹⁄₂" or ³⁄₄" Wirsbo AQUAPEX tubing, fixed 2" on-center spacing, and allows the ¹⁄₂" plastic bend support (A5250500 on page 149) to snap into place for ¹⁄₂" Wirsbo AQUAPEX tubing as it exits a wall. Part No. Part Description A5750500 PEX Wall Support Bracket, ¹⁄₂" and ³⁄₄" Each Qty. Pkg. Qty. - 25 PEX Wall Support Bracket List Price/Ea. $5.
Uponor Plumbing Systems Tube Talon Steel Plate Protector Tube Talon secures ³⁄₈", ¹⁄₂", ⁵⁄₈", ³⁄₄" and 1" Wirsbo AQUAPEX tubing products. Fasteners are included. Part No. Part Description Each Qty. Case Qty. List Price/Ea. F7050375 F7050750 Tube Talon (³⁄₈" PEX), 100/bag 1 10 $23.65 Tube Talon (¹⁄₂", ⁵⁄₈", ³⁄₄" PEX), 100/bag 1 10 $20.65 F7051000 Tube Talon (1" PEX), 50/bag 1 10 $25.60 Steel Plate Protector protects tubing from possible damage by drywall, trim screws or nails, etc.
Uponor Plumbing Systems The Tube Uncoiler facilitates the uncoiling of ⁵⁄₁₆" to 1" Wirsbo AQUAPEX tubing, which simplifies installation and reduces labor. Weighted arms hold tubing in place while uncoiling. Eyelet keeps tubing from tangling. Base is collapsible. No additional hardware necessary for attaching arms. Easy to assemble. Tube Uncoiler Note: Upon assembly, install the guide pin on the swivel arm in order to keep the arm in place. Part No. Part Description E6061000 Tube Uncoiler Each Qty.
Uponor Plumbing Systems APR Copper Manifolds APR 1" (type L) Copper Branch Manifold APR 1" Copper Branch Manifold features ¹⁄₂" APR outlets. By cutting the spun end of the manifold off, sections can sweat together to extend the number of outlets. Do not exceed acceptable flow rates for 1-inch nominal copper. Each manifold end requires a 1-inch transition fitting to complete the manifold assembly. Note: APR Ratchet Tool and APR Blunt Expander Tool are required. APR Brass Sleeves sold separately. Part No.
Uponor Plumbing Systems APR 1" Copper Valved Manifold features ¹⁄₂" APR valved outlets allowing for simple and easy isolation of individual outlets. Sections can sweat together to extend the number of outlets using a standard 1-inch copper coupling. Do not exceed acceptable flow rates for 1-inch nominal copper. Each manifold end requires an end cap or transition fitting to complete the manifold assembly. APR 1" (type L) Copper Valved Manifold Note: APR Ratchet Tool and APR Blunt Expander Tool are required.
Uponor Plumbing Systems APR Fittings APR Brass Sleeve APR Brass Sleeve slides over the end of the expanded Wirsbo AQUAPEX tubing and APR fitting to form the completed fitting. The APR Ratchet Tool is used to slide the sleeve over the tubing and fitting. Part No. K4680500 K4680750 K4681000 K4681250 APR Brass Coupling Part Description Pkg. Qty. Case Qty. List Price/Ea. APR Brass Sleeve, ¹⁄₂" 50 250 $0.80 APR Brass Sleeve, ³⁄₄" 50 250 $1.30 APR Brass Sleeve, 1" 10 100 $2.
Uponor Plumbing Systems APR Brass Elbows make 90-degree PEX-to-PEX connections for Wirsbo AQUAPEX tubing. APR Brass Elbow Note: APR Ratchet Tool and APR Blunt Expander Tool are required. APR Brass Sleeves sold separately. Part No. K4710750 K4711000 K4710500 Pkg. Qty. Case Qty. APR Brass Elbow, ¹⁄₂" PEX x ¹⁄₂" PEX Part Description 25 100 List Price/Ea. APR Brass Elbow, ³⁄₄" PEX x ³⁄₄" PEX 25 100 $6.70 APR Brass Elbow, 1" PEX x 1" PEX 10 100 $11.00 $4.
Uponor Plumbing Systems APR Brass Male Threaded Adapter APR Brass Male Threaded Adapter transitions Wirsbo AQUAPEX tubing to male NPT threads. Note: APR Ratchet Tool and APR Blunt Expander Tool are required. APR Brass Sleeves sold separately. Part No. K4525075 K4527575 K4527510 K4521010 K4525050 APR DZR Brass Male Threaded Adapter Pkg. Qty. Case Qty. APR Brass Male Threaded Adapter, ¹⁄₂" PEX x ¹⁄₂" NPT Part Description 25 100 List Price/Ea. $3.
Uponor Plumbing Systems APR DZR Brass Female Threaded Adapter transitions Wirsbo AQUAPEX tubing to female NPT thread. DZR Brass Fittings are safe for direct burial in soil. APR DZR Brass Female Threaded Adapter Note: APR Ratchet Tool and APR Blunt Expander Tool required. APR Brass Sleeves sold separately. Part No. K4571313 Part Description Each Qty. Pkg. Qty. List Price/Ea. - 10 $34.
Uponor Plumbing Systems APR Brass Fitting Adapter APR Brass Fitting Adapter transitions Wirsbo AQUAPEX tubing to copper fitting connections. Note: APR Ratchet Tool and APR Blunt Expander Tool are required. APR Brass Sleeves sold separately. Part No. K4505075 K4507550 K4507575 K4507510 K4501010 K4505050 APR DZR Brass Fitting Adapter Pkg. Qty. Case Qty. APR Brass Fitting Adapter, ¹⁄₂" PEX x ¹⁄₂" Copper Part Description 25 100 List Price/Ea. $2.
Uponor Plumbing Systems APR Copper Stub Ell provides a 90-degree transition from Wirsbo AQUAPEX tubing to copper pipe. APR Copper Stub Ell Note: APR Ratchet Tool and APR Blunt Expander Tool are required. APR Brass Sleeves sold separately. Part No. K2855050 K2895050 K2897575 K2865050 Part Description APR Copper Stub Ell, ¹⁄₂" PEX x ¹⁄₂" Copper (3¹⁄₂" x 8") Pkg. Qty. Case Qty. List Price/Ea. 25 100 $10.40 APR Copper Stub Ell, ¹⁄₂" PEX x ¹⁄₂" Copper (13" x 8") 25 100 $13.
Uponor Plumbing Systems Brass APR to Copper Ball Valve The APR to Copper Ball Valve features a quarter-turn shut-off valve for ¹⁄₂" Wirsbo AQUAPEX tubing with transition to ¹⁄₂" copper. Note: APR Ratchet Tool and APR Blunt Expander Tool are required. APR Brass Sleeves sold separately. Part No. K4805050 Brass APR to APR Ball Valve Part Description APR Ball Valve (large bore), ¹⁄₂" PEX x ¹⁄₂" copper Pkg. Qty. Case Qty. List Price/Ea. 10 100 $15.
Uponor Plumbing Systems APR Tools and Accessories This Tool Kit contains the Heavy-duty APR Ratchet Tool, ¹⁄₂", ³⁄₄" and 1" jaw sets and a durable carrying case. The Heavy-duty APR Ratchet Tool pulls the APR Brass Sleeve over Wirsbo AQUAPEX tubing and APR fitting to complete the connection. This is a required component of the APR fitting system for ¹⁄₂" through 1¹⁄₄" Wirsbo AQUAPEX tubing. Heavy-duty APR Ratchet Tool Kit Note: The 1¹⁄₄" jaw set is sold separately. Part No.
Uponor Plumbing Systems APR Blunt Expander Tool The APR Blunt Expander Tool Kit contains the APR Expander Heads for ¹⁄₂", ³⁄₄" and 1" PEX tubing. The kit also includes the graphite lubricant for the tool and a durable carrying case for all kit components. The APR Blunt Expander Tool expands the Wirsbo AQUAPEX tubing in order to insert the APR fitting into the tubing. This is a required component of the APR fitting system for ¹⁄₂", ³⁄₄", 1" and 1¹⁄₄" Wirsbo AQUAPEX tubing.
