Brochure

Uponor Pre-insulated Pipe Systems
www.uponorpro.com 888.994.7726 Pre-insulated Pipe Systems
Pre-insulated Pipe Systems
67
Part No. Part Description Full Coil Dimension Full Coil Length List Price/Ft.
5115513 1¹⁄₄" Potable HDPE with 5.5" Jacket, 300-ft. coil 72" x 42" 300' $23.45
5115515 1¹⁄₂" Potable HDPE with 5.5" Jacket, 300-ft. coil 72" x 42" 300' $24.85
5115520 2" Potable HDPE with 5.5" Jacket, 300-ft. coil 72" x 42" 300' $28.95
5116930 3" Potable HDPE with 6.9" Jacket, 300-ft. coil 78" x 49" 300' $41.10
5117940 4" Potable HDPE with 7.9" Jacket, 300-ft. coil 86" x 53" 300' $52.60
ASTM Ecoflex Potable PEX Single is a pre-insulated piping system designed for potable-water distribution
applications. Ecoflex Potable PEX Single is manufactured with single service pipes. The Uponor AquaPEX
service pipes in Ecoflex Potable PEX piping are manufactured by the Engel-method (PEX-a) process
and are listed to ASTM F876 and F877. The tubing is surrounded by multi-layer, closed-cell, PEX-foam
insulation and a water-resistant, corrugated HDPE jacket, making it ideal for direct-burial applications.
Ecoflex Potable PEX uses ProPEX Fittings up to 2" or WIPEX Fittings.
Codes and Standards
Codes: UPC; IPC; NS PC; NPC of Canada
Manufacturing Standards: ASTM F876; ASTM F877; CSA B137.5 Product Listings: NSF -pw, PEX 5006
Part No. Part Description Full Coil Dimension Full Coil Length List Price/Ft.
5215510 1" Potable PEX with 5.5" Jacket, 600-ft. coil 83" x 53" 600' $21.95
5215513 1¹⁄₄" Potable PEX with 5.5" Jacket, 500-ft. coil 83" x 44" 500' $23.75
5216915 1¹⁄₂" Potable PEX with 6.9" Jacket, 300-ft. coil 78" x 49" 300' $34.85
5216920 2" Potable PEX with 6.9" Jacket, 300-ft. coil 78" x 49" 300' $39.60
5217930 3" Potable PEX with 7.9" Jacket, 300-ft. coil 84" x 53" 300' $54.35
Part No. Part Description Full Coil Length List Price/Ea.
C1001250 Ecoflex Potable Plus 1¹⁄₄" 328' $38.40
C3001000 Heat-trace Accessory Kit - $356.40
ASTM Ecoflex Potable
ASTM Ecoflex Potable HDPE features high-density polyethylene (HDPE) service pipe in ASTM sizes. This pipe is the economical solution for
pre-insulated distribution for chilled-water, cooling and low-temperature heating applications. The HDPE service pipe has no oxygen barrier on it
and is manufactured in accordance with PE 3408 or PE 3608 or PE 4710, ASTM D3035 or F714 C3, AWWA C901 or C906, and NSF-61 or NSF-pw.
The tubing is surrounded by multi-layer, closed-cell, PEX-foam insulation and a water-resistant, corrugated HDPE jacket, making it ideal for
direct-burial applications. The HDPE service pipe used in Ecoflex Potable HDPE has the following hydrostatic ratings.
•
140°F at 80 psi
•
100°F at 125 psi
•
120°F at 101 psi
•
73°F at 160 psi
Note: ASTM Ecoflex Potable HDPE can use Uponor's selection of HDPE fittings in the Radiant Heating and Cooling Systems section (see page 28).
Standard SDR 11 fittings from other manufacturers are also acceptable.
ASTM Ecoflex® Potable
HDPE
ASTM Ecoflex® Potable PEX
Single
Ecoflex® Potable Plus