Brochure

Radiant Heating and Cooling Systems www.uponorpro.com 888.994.7726
Radiant Heating and Cooling Systems
Uponor Radiant Heating and Cooling Systems
40
The Zone Pump Control (ZPC) provides connections to zone pumps used in the system in radiant,
baseboard, hot water coil or high temperature applications. All connections are RJ45 and require the use of
a Cat5 wire for the ZPC to communicate with the other devices. Includes control cabinet mounting screws
and power and communication cable with plugs to interconnect controls.
Part No. Part Description Each Qty. List Price/Ea.
A9014000 Zone Pump Control (ZPC) 1 $1,012.20
The Control Cabinet is a low-profile enclosure that houses all main controllers (RTR, PEC, SWT, ZPC). The
cabinet is powder-coated white and can mount in either a right-side or left-side hinged configuration.
Includes hinged inner door with screw lock to conceal network cable and connectors. Includes control
cabinet mounting screws.
Part No. Part Description Each Qty. List Price/Ea.
A9010000 Control Cabinet, 4-position 1 $595.85
A9010001 Control Cabinet, 3-position 1 $542.30
A9010002 Control Cabinet, 2-position 1 $464.30
A9010003 Control Cabinet, 1-position 1 $408.90
A9060001 Main Panel Power Cable with Plug (24vac), replacement part 1 $30.50
A9060002 Main Panel Interconnect Cable with Plugs, replacement part 1 $40.35
The Digital Zone Control Module (DZCM) is a control board that provides connections to the Network
System thermostats and plug-in actuators. The DZCM requires 24VAC to power the control, actuators and
thermostats. The DZCM uses a rotary address switch and requires a unique address number for each DZCM
used in the system. The molex or plug-in connectors allow for simple and easy installation when using the
Thermal Valve Actuator with Molex Plug (A9010501). Not for use with non-thermal actuators greater than
0.25A and will require A9011501. The Digital Zone Control Module communicates with the Router Main
Control over Cat5 wire and RJ45 connectors.
Note: Each DZCM can run up to 10 thermostats (99 thermostats per system)
Part No. Part Description Each Qty. List Price/Ea.
A9011500 Digital Zone Control Module (DZCM) 1 $977.15
A9010501 Thermal Valve Actuator with Molex Plug 1 $86.20
A9011501 1' Actuator Whip with Molex Plug 1 $16.25
A9011510 10' Actuator Extension for A9010501 1 $37.80
The Furnace and Air Condition (FAC) Control board controls the fan, air heat, cooling, humidification
and dehumidification functions. This device is used to operate air handlers, furnaces and rooftop units.
The FAC has two additional contacts for 10k sensors for additional system feedback. All connections are
screw-terminal blocks and are removable from the board for ease of wiring. The board comes with a manual
switch that can be set in the off-auto-manual positions. The FAC requires 24VAC and communicates with
the Router Main Control over Cat5 wire and RJ45 connectors.
Part No. Part Description Each Qty. List Price/Ea.
A9011100 Furnace and Air Condition Control (FAC) 1 $557.25
Zone Pump Control (ZPC)
Control Cabinets and
Components
Digital Zone Control Module
(DZCM)
Furnace and Air Condition
Control (FAC)