P R O D U C T C ATA LO G U E MARCH 2011 Plumbing Systems • Fire Sprinkler Systems Flawlessly moving water to provide the ultimate in comfort, safety and convenience for residential and commercial applications. That’s Uponor Logic at work. Radiant Heating and Cooling Systems • Pre-insulated Pipe Systems www.uponorpro.
Simply Efficient 2 Pre-insulated Pipe Systems 63 Simply Thermal 3 Tube Handling 119 Design and Technical Support 4 Pre-insulated Pipe Systems (Ecoflex®) Reference Chart 65 Tube Uncoilers 119 Milwaukee® Tools 5 Ecoflex Uncoiler 65 Tube Cutters 120 New PEX Coils Packaging 6 ASTM Ecoflex Thermal 66 Tools and Accessories 121 ASTM Ecoflex Potable 67 ProPEX Tools and Accessories 121 Ecoflex Made-to-order 68 MLC Press Fitting Tools and Accessories 123 Fittings 68 Other Tools 124
Sébastien Pion, Technical Sales Representative Simply Efficient At Uponor, we believe in helping our customers achieve their vision. Whether through our products or people, we will go above and beyond to meet our customers’ needs. Just ask Jacques De Grâce, a visionary Engineer who was faced with a significant and challenging project. When Jacques and his firm, Pageau Morel, needed the right products and expertise to meet their needs, they contacted Sebastien Pion, Uponor's Technical Sales Representative.
Craig Baker, Project Manager PlanET Biogas Solutions Catalyst Power Abbotsford, BC Simply Thermal At Uponor, we design, build and sell systems that use less energy and conserve water. That’s why when PlanET Biogas Solutions were looking for a partner for their biogas project in Abbotsford, BC they chose Uponor’s pre-insulated pipe solutions. Uponor’s Ecoflex pipe was chosen because of its longstanding record of durability and dependability, and because of the ease with which it is installed.
U p o n o r D e s i g n a n d Te c h n i c a l S u p p o r t Uponor Design and Technical Support Uponor Design and Technical Support When you are ready to start your project, Uponor’s dedicated team of professional designers, managers and technical support representatives are available to guide you every step of the way — from initial design to final installation.
Milwaukee® Tools M i l w a u k e e To o l s Bring even greater installation efficiency to your next project.
NUepwo nPoErXFCa o c ti losr yP aTrc ka ai ngiinngg New PEX Coils Packaging New Packaging Makes PEX Tubing Coils Easier to Use With Uponor’s new ‘center punch’ technology, contractors can now simply punch through the plastic perforation at the top of the coil and pull the required amount of PEX tubing for the job. When done, simply place the tubing back in the coil and carry the coil to the next project.
Radiant Heating and Cooling Systems www.uponorpro.com 888.994.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Barrier Tubing Wirsbo hePEX™ Tubing, Coil Wirsbo hePEX™ tubing, featuring our patent-pending oxygen barrier and tested to DIN 4726, is intended for closed-loop hydronic radiant heating and cooling applications. It is compatible with Uponor’s ProPEX® and QS-style fittings and is manufactured in full compliance to ASTM F876-09 (including dimensional requirements for barrier tubing) and F877.
Part No. Part Description List Price/Ea. A1930625 ⁵⁄₈" Wirsbo hePEX, 20-ft. straight length, 300 ft. (15 per bundle) $329.85 A1930750 ³⁄₄" Wirsbo hePEX, 20-ft. straight length, 300 ft. (15 per bundle) $392.25 A1921000 1" Wirsbo hePEX, 20-ft. straight length, 200 ft. (10 per bundle) $439.25 A1921250 1¹⁄₄" Wirsbo hePEX, 20-ft. straight length, 100 ft. (5 per bundle) $364.00 A1921500 1¹⁄₂" Wirsbo hePEX, 20-ft. straight length, 100 ft. (5 per bundle) $540.80 A1922000 2" Wirsbo hePEX, 20-ft.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Multi-layer Composite (MLC) Tubing Coil Multi-layer Composite (MLC) tubing consists of interior aluminum tubing lined with inner and outer layers of PEX. MLC tubing offers 100% oxygen diffusion. The stay-in-place rigid feature of the tubing works great for hydronic baseboard, radiators, unit heaters, air handlers or manifold connections.
Non-barrier Tubing Uponor AquaPEX tubing is suitable for use in hydronic heating applications where the system contains no ferrous corrodible components or where any ferrous corrodible components are isolated from the tubing. Part No. Part Description Coils/Pallet Uponor AquaPEX Tubing Coil — White List Price/Ea. F1040500 ¹⁄₂" Uponor AquaPEX White, 100-ft. coil 22 $58.21 F1060500 ¹⁄₂" Uponor AquaPEX White, 300-ft. coil 18 $174.64 F1100500 ¹⁄₂" Uponor AquaPEX White, 500-ft. coil 12 $291.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems TruFLOW Heating Manifold Exploded View Thermal Actuator, Two-wire (A3020416) or Thermal Actuator, Four-wire (A3010522) Thermal Actuator, Two-wire (A3030523) TruFLOW Valve Cap, replacement part (A2450025) TruFLOW Manifold Supply and Return Ball Valves (A2631250) Motorized Valve Actuator, Four-wire (A3020522) TruFLOW Manifold TruFLOW End Cap with Vent and Drain (A2621250) TruFLOW Valve Head, replacement part (A2450026) TruFLO
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Manifold Wall Cabinets The recessed-style Manifold Wall Cabinet features a removable door-trim package and is adjustable to accommodate brass or engineered plastic (EP) manifolds mounted in either a 2x4 or 2x6 stud wall. Mount an Uponor Zone Control Module inside the cabinet for ease of wiring and protection from exposure or possible damage.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems TruFLOW Manifold Assemblies TruFLOW Jr. Assembly with Balancing Valves and Valveless TruFLOW Jr. and Classic Assemblies with Balancing and Isolation Valves 14 The TruFLOW Jr. Assembly with Balancing Valves and Valveless manifold comes fully assembled and ready for installation. The manifold body (1" barrel diameter) ends have R32 unions and the loop outlets have QS20 male threads.
TruFLOW Jr. Modular Manifolds TruFLOW Jr. Modular Manifold with Balancing Valves is used in conjunction with either the TruFLOW Jr. Modular Manifold with Isolation Valves or the TruFLOW Jr. Modular Valveless Manifold to complete the manifold set. The TruFLOW Jr. Modular Manifold with Balancing Valves allows manual flow balancing of the individual loops on the manifold. Manifolds are available in 2- to 4-loop configurations depending on model.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems TruFLOW Manifold Accessories TruFLOW Manifold Mounting Bracket TruFLOW Support Bracket TruFLOW Jr. and TruFLOW Classic Manifold Mounting Bracket is used to mount the TruFLOW Jr. and TruFLOW Classic Manifolds. Brackets are made of durable metal and are offset front-to-back and side-to-side for ease of installation. Two brackets are required for each manifold location. Pkg. Qty. List Price/Ea. A2640006 TruFLOW Jr.
TruFLOW Manifold Coupling Nipple features male BSP thread on both ends and is used to make the connection between manifold parts. Primary seal for the connection is made with the attached O-ring on the nipple. Thread sealant on the nipple ensures tight bonding between the nipple and the manifold. Use Uponor Silicone Oil (A2620007), sold separately, or similar silicone lubricant on the male threads to ease installation. Part No.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems The TruFLOW Manifold Balancing Hex Key is used on the supply manifold to adjust the flow rate across the loop for balancing. Each manifold is shipped with a hex key for balancing. TruFLOW Manifold Balancing Hex Key Part No. Part Description A2620002 TruFLOW Manifold Balancing Hex Key, replacement part Pkg. Qty. 10 List Price/Ea. $6.15 Use the TruFLOW Visual Flow Meter on TruFLOW Jr.
Engineered Plastic (EP) Heating Manifold Exploded View EP Heating Manifold End Cap with Vent and Drain (A2671250) EP Heating Manifold Connection Piece (A2670032) EP Heating Manifold Two-wire Actuator (A3030522) Thermal Actuator, Two-wire (A3020416) or Thermal Actuator, Four-wire (A3010522) EP Heating Manifold Actuator Adapter (A2671300) EP Heating Manifold Thermometer (A2670132) EP Heating Manifold, 4 loops (A2670401) Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems EP
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems 20 EP Heating Manifold EP Heating Manifold Assembly with Flow Meter The EP Heating Manifold Assemblies feature isolation valves and balancing valves with flow meters, and come fully assembled, ready for installation. The manifolds are available in 2- through 8-loop configurations. The body ends feature R32 unions and the loop outlets have R20 male threads.
EP Heating Manifold Accessories The EP Heating Manifold Single Section with Isolation Valve is a single loop add-on used on the return side for EP Heating Manifold Assemblies (A2670201 through A2670801). Part No. Part Description A2670001 EP Heating Manifold Single Section with Isolation Valve Dimension (Body-Outlets-Body) Each Qty. List Price/Ea. R20 1 $30.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems EP Heating Manifold Wall Cabinet Bracket Kit EP Heating Manifold Actuator Adaptor EP Heating Manifold Isolation Valve Body EP Heating Manifold Flow Meter Valve Body EP Heating Manifold Thermometer The EP Heating Manifold Wall Cabinet Bracket Kit enables mounting the EP Heating Manifold in a Manifold Wall Cabinet. 22 Part Description A2603588 EP Heating Manifold Wall Cabinet Bracket Kit, set of 2 Each Qty.
Manifold Adapters and Fittings The Brass Manifold Adapter allows either a straight copper pipe or a copper fitting adapter to sweat to the brass manifold adapter. The R32 threaded side couples with the R32 union connection on the brass manifolds. Part No. Part Description Pkg. Qty. List Price/Ea. A4143210 Brass Manifold Adapter, R32 x ³⁄₄" Adapter or 1" Fitting Adapter 10 $21.85 A4133210 Brass Manifold Adapter, R32 x 1" Adapter or 1¹⁄₄" Fitting Adapter 10 $16.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems QS-style Compression Fitting Assembly The QS-style Compression Fitting Assembly with O-ring connects ⁵⁄₁₆", ³⁄₈", ¹⁄₂" and ⁵⁄₈" Uponor PEX tubing to Uponor brass and EP heating manifolds and R20 fittings. Sold as a three-piece assembly. The QS-style compression rings and o-rings are also sold separately. Part No. Part Description Pkg. Qty. List Price/Ea.
MLC Tubing Compression Fitting Assembly, made of heat-treated brass, connects ¹⁄₂" and ⁵⁄₈" MLC tubing to brass and EP Heating Manifolds. MLC Tubing Compression Fitting Assembly, made of heat-treated brass, connects ¹⁄₂" and ⁵⁄₈" MLC tubing to brass manifolds. Part No. Part Description Pkg. Qty. List Price/Ea. D4120500 ¹⁄₂" MLC Tubing Compression Fitting Assembly, R20 thread 10 $17.35 D4120625 ⁵⁄₈" MLC Tubing Compression Fitting Assembly, R20 thread 10 $33.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Copper Manifolds 2" Copper Valved Manifold with ProPEX Ball Valves The Uponor 2" x 4' Copper Valved Manifold with ProPEX Ball Valves is made of type L copper and features ⁵⁄₈" and ³⁄₄" nominal branches that are 4 inches on center. The manifold is available in 12-outlet configurations. The maximum recommended flow to the manifold based on manifold body diameter is 45 gpm. Note: ProPEX Tool is required.
High-density polyethylene (HDPE) SDR 11 tubing is used as supply and return mains for large hydronic heating applications where the system contains no ferrous corrodible components or where ferrous corrodible components are isolated from the tubing. HDPE tubing is manufactured from PE 3408 material. Tubing and fittings are connected through fusion welding. Service pressure and temperature ratings for HDPE used to convey water or water/glycol mixtures are as follows.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems HDPE Elbow HDPE Tee HDPE Flange Adapter HDPE Flange Backup Ring HDPE End Cap HDPE Reducing Coupling 28 Radiant Heating and Cooling Systems Part No. Part Description Each Qty. List Price/Ea. B2162000 HDPE 90-degree Elbow, 2" HDPE x 2" HDPE 1 $44.75 B2163000 HDPE 90-degree Elbow, 3" HDPE x 3" HDPE 1 $89.55 B2164000 HDPE 90-degree Elbow, 4" HDPE x 4" HDPE 1 $132.
Mechanical Functionality ˘ ˘ CLIMATE CONTROL ˘ CLIMATE CONTROL NETWORK SYSTEM MULTIFUNCTION CONTROLLER Mechanical Functionality Boiler Staging Domestic Hot Water Snow and Ice Melting Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Water Mixing Zone Pumping Advanced Mechanical Functionality Furnace/Air Handlers Humidifier/Dehumidifier HRV Dampers Geothermal Highly Developed Functionality Special Features Remote Access Remote E-mail High-definition Touch Panel Solar
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Climate Cŏntrol™ Multifunction Controller Outdoor Sensor (included with control) ES from Zone Control Modules 24 v (ac) Climate Cŏntrol Multifunction A8020000 Pump Relay A9013030 Pump Relay A9013030 Pump Relay A9013030 DHW Sensor A9012002 Pump Relay A9013030 Dual Sensor A9013001 1' Cat5 Cable A9030001 Total Qty: 3 (2 for Injection pump and 1 for Primary pump) Boiler Relay A9012010 Climate Cŏntrol Multifunction Hydroni
The Climate Cŏntrol Multifunction Controller provides mixing control of any Three-way Modulating Valves (0-10VDC) with up to three different water temperatures in either radiant heating or snow-melting applications. Mount the Modulating Valve Control on or near the valve. Connect to the Climate Control Multifunction Controller using a standard Cat5 cable with RJ45 ends. Uponor offers three-way valves with the valve control pre-wired and mounted to the motor. Part No. Part Description Each Qty.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Sensors Climate Cŏntrol Multifunction Replacement Parts and Accessories Three-way Tempering Valve Differential Pressure By-pass Valve 32 The Climate Cŏntrol Multifunction Controller provides a variety of sensors to provide temperature information. The Outdoor Sensor connects to the Climate Cŏntrol Multifunction with 18-2 AWG thermostat wire to a dedicated terminal.
Climate Cŏntrol Zoning System (wireless) The Climate Cŏntrol Zoning System Starter Kit includes a Base Unit (C-55), an Interface (I-75), a removable antenna, cables for connections, mounting accessories, instructions and a manual. Located near the radiant system manifolds, the Base Unit can handle up to 12 thermostats (sold separately) and control up to 14 thermal actuators (sold separately). Each actuator controls the flow of the water through loops of PEX tubing in a radiant system. Part No.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Use the Zoning Thermostat Mounting Kit to properly mount the T-54 Thermostat to a wall or to cover up a wall area when replacing a larger, conventional thermostat. Zoning Thermostat Mounting Kit, T-54 Part No. Part Description A3600154 Zoning Thermostat Mounting Kit, T-54 Each Qty. List Price/Ea. 1 $10.05 Connecting the Outdoor Sensor (A3600254) displays the outdoor temperature on the T-54 Thermostat user interface.
Zoning Controls (wired) The Heat-only Thermostat (A3030101) and the Heat and Cool Thermostat (A3030102) are designed to operate in heating mode over two wires. These types of thermostats obtain their power for operation from taking voltage from the connected wiring. Different from other industry power-sharing thermostats, these eliminate any need for a third wire or battery, which makes the thermostats simple to install, wire and service. Part No. Part Description Each Qty. List Price/Ea.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Zone Control Module Powered Zone Controller The Zone Control Module is designed for use with Uponor Thermostats, Motorized Valve Actuators (MVAs), Thermal Actuators or Zone Valves. The Three-zone Control Module (R-2.0) (A3030003) and Four-zone Control Module (R-2.0) (A3030004) are designed to be used with Two-wire actuators.
Four-wire Zone Valve (24 VAC) features ³⁄₄" and 1" sweat connections. It provides flow control for a singlezoned manifold (manifold serving one zone), and has a built-in flow-balancing feature. The zone valve includes an end switch for activation of a relay (pump), heat plant or other auxiliary devices. Part No. Part Description A3010525 ³⁄₄" Thermal Zone Valve, four-wire A3010526 1" Thermal Zone Valve, four-wire A3070525 ³⁄₄" MVA Zone Valve, four-wire Each Qty. Pkg. Qty. List Price/Ea.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Actuator to Manifold Compatibility Table Part Number A3030522 A3030523 A3020416 A3010522 A3020522 A9010501 Thermal Valve Actuator Thermal Valve Actuator Thermal Valve Actuator Thermal Valve Actuator Motorized Valve Actuator Thermal Valve Actuator 2 2 2 4 4 4 End Switch No No No Yes Yes Yes Thread Type Type Number of Wires Male Female Female Female Female Female EP Heating Manifold Yes No Yes
Climate Cŏntrol Network System The Uponor Climate Cŏntrol Network System offers a variety of configurations of the main controllers that are mounted into a cabinet. See the table below to correctly identify the controls required in the main cabinet to provide the necessary functionality.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Zone Pump Control (ZPC) Control Cabinets and Components Digital Zone Control Module (DZCM) The Zone Pump Control (ZPC) provides connections to zone pumps used in the system in radiant, baseboard, hot water coil or high temperature applications. All connections are RJ45 and require the use of a Cat5 wire for the ZPC to communicate with the other devices.
The Heat Recovery Ventilator (HRV) Control board controls up to three speeds of operation: low, medium and high. All connections are screw-terminal blocks and are removable from the board for ease of wiring. The board comes with a manual switch that can be set in the off-auto-manual positions. The HRV communicates with the Router Main Control over Cat5 wire and RJ45 connectors along with power for the board. Part No. Part Description Each Qty. List Price/Ea.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Three-way Modulating Valve Part No. Part Description Each Qty. List Price/Ea. A9013021 ³⁄₄" Three-way Modulating Valve with control, 0-10v (Cv = 4.7) 1 $756.15 A9013022 1" Three-way Modulating Valve with control, 0-10v (Cv = 10) 1 $756.45 A9013023 1¹⁄₄" Three-way Modulating Valve with control, 0-10v (Cv = 19) 1 $811.05 A9013024 1¹⁄₂" Three-way Modulating Valve with control, 0-10v (Cv = 29) 1 $1,025.
The Climate Cŏntrol Network System uses a variety of sensors to provide feedback and information to the main controls. From sensing tubing temperature to domestic hot water to an optional system pressure sensor, all sensors easily connect to the system, simplifying wiring and reducing the amount of wire required in conventional control systems. Part No. Part Description Each Qty. List Price/Ea. A9012005 A9012002 Outdoor Sensor, 10k 1 $66.05 Domestic Hot Water (DHW) Tank Sensor, 10k 1 $52.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Fully Assembled proPANEL® Units proPANEL 90 The proPANEL® 90 unit offers a simple pumping station, used for radiant heating or as a high-temperature loop. The proPANEL 90 is pre-wired to a control interface, meaning the pump relay is connected to the control interface using a Cat5 cable. The panel is prepared to connect to the Climate Cŏntrol Multifunction hydronic controller and/or the Climate Cŏntrol Network System.
ProPEX Fittings Engineered Plastic (EP) Lead-free Brass (LF) Uponor offers a comprehensive line of engineered plastic (EP), lead-free brass (LF), red brass, standard yellow brass and WIPEX DZR brass fittings to effectively meet any residential or commercial plumbing or radiant application.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems ProPEX EP, Lead-free (LF) Brass, Red Brass and Brass Couplings make PEX-to-PEX connections. ProPEX Coupling Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Q4773838 ProPEX EP Coupling, ³⁄₈" PEX x ³⁄₈" PEX Pkg. Qty. LF4543850 ProPEX LF Brass Coupling, ³⁄₈" PEX x ½" PEX $1.42 25 $8.93 ProPEX Red Brass Coupling, ³⁄₈" PEX x ½" PEX 25 $5.
ProPEX LF Brass to Polyethylene (PE) Coupling transitions black PE tubing to Uponor PEX tubing. Product does not include hose clamps for the PE side of the coupling. ProPEX LF Brass to Polyethylene (PE) Coupling Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description LF4591010 ProPEX LF Brass to PE Coupling, 1" PEX x 1" PE Pkg. Qty. List Price/Ea. 10 $25.88 ProPEX LF Brass to Polybutylene (PB) Coupling transitions PB tubing to Uponor PEX tubing.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems ProPEX LF Brass or Brass Elbow with MIP makes 90-degree connections for ¹⁄₂" Uponor AquaPEX tubing to ¹⁄₂" or ³⁄₈" male NPT thread. ProPEX LF Brass Elbow with MIP Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description LF4125050 ProPEX LF Brass Elbow, ¹⁄₂" PEX x ¹⁄₂" MIP Q4743850 ProPEX Brass Elbow, ¹⁄₂" PEX x ³⁄₈" MIP Pkg. Qty. List Price/Ea. 25 $12.54 25 $7.
ProPEX EP, LF Brass and Brass Reducing Tees make diverting connections for Uponor PEX tubing in supply and return mains. Branch size is listed last in the part description. ProPEX Reducing Tee Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Q4755575 ProPEX EP Reducing Tee, ¹⁄₂" PEX x ¹⁄₂" PEX x ³⁄₄" PEX 25 $7.56 ProPEX Brass Reducing Tee, ¹⁄₂" PEX x ¹⁄₂" PEX x ³⁄₄" PEX 25 $5.95 Q4757555 ProPEX EP Reducing Tee, ³⁄₄" PEX x ¹⁄₂" PEX x ¹⁄₂" PEX 25 $3.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems ProPEX Reducing Tee Part No. Pkg. Qty. List Price/Ea. ProPEX DZR Brass Reducing Tee, 1¹⁄₄" PEX x 1¹⁄₄" PEX x 1" PEX 10 $10.95 Q4751517 ProPEX EP Reducing Tee, 1¹⁄₂" PEX x 1" PEX x ³⁄₄" PEX 10 $13.34 Q4751511 ProPEX EP Reducing Tee, 1¹⁄₂" PEX x 1" PEX x 1" PEX 10 $13.34 G4701331 Q4751537 ProPEX EP Reducing Tee, 1¹⁄₂" PEX x 1¹⁄₄" PEX x ³⁄₄" PEX 10 $15.
ProPEX EP and Brass Plugs permanently or temporarily terminate the end of Uponor PEX tubing. ProPEX Plug Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Q4533838 ProPEX Brass Plug for ³⁄₈" PEX 25 $1.15 Q4350500 ProPEX EP Plug for ¹⁄₂" PEX 25 $0.76 Q4536363 ProPEX Brass Plug for ⁵⁄₈" PEX 25 $7.90 Q4350750 ProPEX EP Plug for ³⁄₄" PEX 25 $1.25 ProPEX Brass Plug for ³⁄₄" PEX 25 $1.35 Q4351000 ProPEX EP Plug for 1" PEX 10 $2.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems ProPEX Adapters ProPEX LF Brass and Brass Male Threaded Adapters connect Uponor AquaPEX tubing to male NPT threads and are intended as transition fittings from metal to PEX. ProPEX Brass Male Threaded Adapter Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty.
ProPEX LF Brass and Brass Female Threaded Adapters connect Uponor PEX tubing to female NPT threads and are intended as transition fittings from metal to PEX. ProPEX Brass Female Threaded Adapters Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description LF4575050 ProPEX LF Brass Female Threaded Adapter, ¹⁄₂" PEX x ¹⁄₂" NPT Q4575050 ProPEX Brass Female Threaded Adapter, ¹⁄₂" PEX x ¹⁄₂" NPT LF4575075 ProPEX LF Brass Female Threaded Adapter, ¹⁄₂" PEX x ³⁄₄" NPT $11.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems ProPEX LF Brass, Red Brass and Brass Sweat Adapters transition Uponor AquaPEX tubing to copper pipe. ProPEX Brass Sweat Adapters Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty.
ProPEX LF Brass, Red Brass and Brass Fitting Adapters transition Uponor PEX tubing to copper fittings. ProPEX Brass Fitting Adapters Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description LF4505050 ProPEX LF Brass Fitting Adapter, ¹⁄₂" PEX x ¹⁄₂" Copper Pkg. Qty. List Price/Ea. 25 $3.51 V4505050 ProPEX Red Brass Fitting Adapter, ¹⁄₂" PEX x ¹⁄₂" Copper 25 $10.01 Q4505050 ProPEX Brass Fitting Adapter, ¹⁄₂" PEX x ¹⁄₂" Copper 25 $3.04 25 $7.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Tubing Transition Fittings QS-style Coupling Nipple QS-style Conversion Nipple The QS-style Coupling Nipple (brass) and the appropriate fitting assembly connect ⁵⁄₁₆", ³⁄₈", ¹⁄₂", ⁵⁄₈" or ³⁄₄" Uponor tubing together. Part No. Part Description Pkg. Qty. List Price/Ea. A4322020 QS-style Coupling Nipple, R20 x R20 10 $9.70 A4322525 QS-style Coupling Nipple, R25 x R25 (for ³⁄₄" and ⁵⁄₈" tubing only) 10 $18.
Baseboard Fittings QS-style Baseboard Elbow (brass) connects ¹⁄₂", ⁵⁄₈" and ³⁄₄" Uponor PEX tubing to ³⁄₄" copper baseboard with the appropriate QS-style fitting assembly. QS-style Baseboard Elbow and Tee Note: QS-style Fitting Assembly is required. Part No. Part Description Pkg. Qty. List Price/Ea. A4382075 QS-style Baseboard Elbow, R20 x ³⁄₄" Copper Adapter 10 $12.15 A4372075 QS-style Baseboard Elbow, R20 x ³⁄₄" Copper Fitting Adapter 10 $20.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems MLC Press Fittings MLC Press Fitting Brass Coupling MLC Press Fitting Brass Coupling connects two pieces of MLC tubing. Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required. Part No. MLC Press Fitting Brass Elbow MLC Press Fitting Brass Tee Part Description Pkg. Qty. List Price/Ea. D4545050 MLC Press Fitting Brass Coupling, ¹⁄₂" MLC Tubing x ¹⁄₂" MLC Tubing 10 $14.
MLC Press Fitting Brass Female NPT Threaded Adapter connects MLC tubing to female NPT threads. Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required. Part No. Part Description D4575075 MLC Press Fitting Brass Female Threaded Adapter, ¹⁄₂" MLC Tubing x ³⁄₄" NPT Pkg. Qty. List Price/Ea. 10 $22.85 D4576375 MLC Press Fitting Brass Female Threaded Adapter, ⁵⁄₈" MLC Tubing x ³⁄₄" NPT 10 $17.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems MLC Press Fitting Manifold Adapter transitions R32 manifold connections to ⁵⁄₈", ³⁄₄" and 1" MLC tubing. MLC Press Fitting Manifold Adapter Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required. Part No. Part Description Pkg. Qty. List Price/Ea. D4143263 MLC Press Fitting Manifold Straight Adapter, R32 x ⁵⁄₈" MLC 10 $27.
Heat-transfer Panels and Plates (Quik Trak® and Joist Trak™) The ¹⁄₂" x 4' feet plywood panels are attached to an aluminum heat transfer sheet. Use with ⁵⁄₁₆" Wirsbo hePEX tubing only. Uponor’s fully assembled set of Quik Trak® panels consist of six panels fastened together with strapping tape. The panels are staggered (2") on both ends to aid alignment. Part No. Part Description Each Qty. Pkg. Qty. List Price/Ea. A5060701 Quik Trak 7" x 48" Panels - 10 $16.
Radiant Heating and Cooling Systems Uponor Radiant Heating and Cooling Systems Quik Trak Sealant is 100% silicone and provides good thermal transfer. Use to adhere ⁵⁄₁₆" Wirsbo hePEX tubing in the Quik Trak groove. Quik Trak Sealant Quik Trak Installation Tool Kit Part No. Part Description E6050010 Quik Trak Sealant, 10.3 fluid oz. (300 ml) Pkg. Qty. List Price/Ea. 24 $13.
Pre-insulated Pipe Systems www.uponorpro.com 888.994.
Pre-insulated Pipe Systems Uponor Pre-insulated Pipe Systems Uponor Pre-insulated pipe systems — The Distribution Solution For hydronic heating, cooling and potable-water applications A Quality System Superior Performance Popular Applications Uponor’s pre-insulated pipe systems offer flexible, plastic distribution piping for a variety of hydronic heating, cooling and potablewater applications.
Uponor Pre-insulated Pipe Systems Pre-insulated Pipe Systems (Ecoflex®) Reference Chart ASTM PEX 5215510 5215513 5216915 5216920 Potable PEX Twin 5226910 5226913 5226915 5227920 Thermal Twin 5026910 5026913 5026915 5027920 5027925 Thermal Single 5015510 5015513 5016915 5016920 5016925 Pipe Dimension 5217930 5017930 5017935 5017940 1" 1¹⁄₄" 1¹⁄₂" 2" 2¹⁄₂" 3" 3¹⁄₂" 4" OD (inch) 1.125 1.375 1.625 2.125 2.625 3.125 3.625 4.125 Wall thickness 0.125 0.153 0.181 0.
Uponor Pre-insulated Pipe Systems ASTM Ecoflex Thermal Ecoflex Thermal is a pre-insulated piping system designed for fluid transfer in heating and cooling applications. Ecoflex Thermal is manufactured with single and twin PEX service pipes. The Wirsbo hePEX service pipes in Ecoflex Thermal piping are manufactured by the Engel-method (PEX-a) process and are listed to ASTM F876 and F877.
Uponor Pre-insulated Pipe Systems ASTM Ecoflex Potable ASTM Ecoflex Potable HDPE features high-density polyethylene (HDPE) service pipe in ASTM sizes. This pipe is the economical solution for pre-insulated distribution for chilled-water, cooling and low-temperature heating applications. The HDPE service pipe has no oxygen barrier on it and is manufactured in accordance with PE 3408 or PE 3608 or PE 4710, ASTM D3035 or F714 C3, AWWA C901 or C906, and NSF-61 or NSF-pw.
Uponor Pre-insulated Pipe Systems Ecoflex Made-to-order Uponor now offers a made-to-order Twin option for Ecoflex pre-insulated pipe systems. Ecoflex Potable PEX Twin products are available and madeto-order with a 4-week lead time on standard orders. General terms and conditions apply.
Uponor Pre-insulated Pipe Systems See the Radiant Heating and Cooling Systems section, pages 45-55, for an assortment of ProPEX fittings that are compatible with ASTM Ecoflex Thermal and ASTM Ecoflex Potable PEX products.
Uponor Pre-insulated Pipe Systems Accessories Pre-insulated Pipe Systems Connection Vault Shrink Sleeve for Connection Vault Connection Vault provides a fully watertight, insulated enclosure for multiple straight-through and branch connections. Buried underground, a Connection Vault allows the system designer to virtually eliminate all branch connections typical of traditional underground system design. Step-down outlets are compatible with the majority of Ecoflex piping. Part No.
Uponor Pre-insulated Pipe Systems Insulation Kits All Pre-insulated Pipe Systems Insulation Kits make insulated connections of single or twin-style Ecoflex pre-insulated pipe with a jacket size of 5.5", 6.9" and 7.9". The kits feature two shells, stainless-steel bolts, plastic pins and joint sealing compound. Note: Uponor fittings and EPDM Rubber End Caps are required at all ends of the piping system to ensure system integrity.
Uponor Pre-insulated Pipe Systems Wall-penetration Accessories Pre-insulated Pipe Systems Wall Sleeve with Heat Shrink Seal Kit Compression Wall Seal Wall Sleeve 72 Pre-insulated Pipe Systems The Wall Sleeve with Heat Shrink Seal Kit offers a simple installation for new-block construction or an existing wall with an irregular hole. The Wall Sleeve is not engineered for specific bearing loads, but offered for installation convenience and compatibility. Part No. Part Description Each Qty.
Uponor Pre-insulated Pipe Systems Pipe Part Number Insulation Kits Service Pipe Jacket Size WIPEX Fitting Rubber End Cap Tee Straight Wall Accessories Elbow Compression Wall Seal Wall Sleeve Wall Sleeve Kit Thermal Single 5015510 1" 5.5" 5550010 5855513 1021990 1021992 1021991 1007360 1007365 1018269 5015513 1¼" 5.5" 5550013 5855513 1021990 1021992 1021991 1007360 1007365 1018269 5016915 1½" 6.
Uponor Pre-insulated Pipe Systems ASTM Weights and Dimensions Chart Part Number Service Pipe Jacket Coil Length Coil Diameter Coil Width Coil Weight Weight Per Foot Pre-insulated Pipe Systems Thermal Single 5015510 1" 5.5" 600' 83" 53" 480 lbs. 0.80 lbs. 5015513 1¼" 5.5" 500' 83" 44" 400 lbs. 0.80 lbs. 5016915 1½" 6.9" 300' 78" 49" 438 lbs. 1.46 lbs. 5016920 2" 6.9" 300' 78" 49" 525 lbs. 1.75 lbs. 5016925 2½" 6.9" 300' 78" 49" 591 lbs. 1.97 lbs.
Uponor Pre-insulated Pipe Systems Tools and Accessories Refer to the following pages for a full listing of tools and accessories.
Pre-insulated Pipe Systems Uponor Pre-insulated Pipe Systems 76 Pre-insulated Pipe Systems www.uponorpro.com 888.994.
Residential Fire Sprinkler Systems www.uponorpro.com 888.994.
Uponor Residential Fire Sprinkler Systems Uponor AquaSAFE™ Fire Sprinkler System P RO PEX BRASS FITTING FEATURES AND BENEFITS ¥ Multipurpose System: integrated plumbing and Þre sprinklers ¥ Economical and easy add-on to plumbing system PEX-A TUBING ¥ FulÞll IRC (International Residential Code) mandate and offer increased peace of mind P RO PEX FIRE SPRINKLER ADAPTER ¥ Expand your business and income potential ¥ Full support and training from Uponor Fire Safety Team ¥ More freeze-resistant compared to C
Uponor Residential Fire Sprinkler Systems Uponor AquaPEX Non-barrier Tubing Uponor AquaPEX tubing is used in hot and cold potable-water distribution systems as well as AquaSAFE residential fire sprinkler systems. It is also suitable for use in hydronic heating and cooling applications where the system contains no ferrous corrodible components or where any ferrous corrodible components are isolated from the tubing.
Uponor Residential Fire Sprinkler Systems Looped Sprinkler Adapters ProPEX Lead-free (LF) Brass Fire Sprinkler Adapter The ProPEX Lead-free Brass Fire Sprinkler Adapter connects residential fire sprinklers to Uponor AquaPEX tubing. Made of lead-free* brass with ProPEX outlets, the adapter is NSF- and UL-approved for combined plumbing and fire sprinkler systems.
Uponor Residential Fire Sprinkler Systems Residential Fire Sprinklers The Concealed Sprinkler threads onto Uponor’s Fire Sprinkler Adapter Fitting. All sprinklers come complete with a plastic protective cap and cup. Sprinklers are NSF- and UL-approved for combined plumbing and fire sprinkler systems. Concealed Sprinkler Note: Concealed Cover Plates sold separately. Do not store sprinkler assemblies where the ambient temperature will exceed 100°F.
Uponor Residential Fire Sprinkler Systems Network Sprinkler Assemblies The Recessed Pendent Sprinkler Assembly comes with the sprinkler threaded onto the stainless-steel multiport fitting with ProPEX outlets. All assemblies come complete with a protective plastic cap and escutcheon. Sprinkler assemblies are NSF- and UL-approved for combined plumbing and fire sprinkler systems. Recessed Pendent Sprinkler Assembly Note: Do not store sprinkler assemblies where the ambient temperature will exceed 100°F.
Uponor Residential Fire Sprinkler Systems Sprinkler Cabinets This three-sprinkler cabinet allows installers to leave spare sprinklers in the home. Sprinkler Cabinet Note: Ensure extra sprinklers of each type used in the home are purchased separately and included in the cabinet. Part No. Part Description Q7503000 Sprinkler Cabinet without Sprinklers Each Qty. List Price/Ea. 1 $80.
Uponor Residential Fire Sprinkler Systems Recessed Escutcheon provides a finished appearance. It comes complete with a tension collar, and is available in white or brass. Recessed Escutcheon Part No. Part Description Pkg. Qty. List Price/Ea. Q71801WH ¹⁄₂" Recessed Escutcheon, White 25 $8.25 ¹⁄₂" Recessed Escutcheon, Brass 25 $13.
Uponor Residential Fire Sprinkler Systems Manifolds and Fittings ProPEX 1" Copper Branch Manifold has ¹⁄₂" ProPEX outlets brazed to manifold trunk. Sweat manifolds together to create the desired number of outlets. Do not exceed acceptable flow rates for 1" nominal copper. UL 1821-listed. ProPEX 1" (type L) Copper Branch Manifold Note: ProPEX Tool is required. ProPEX Rings sold separately. Part Description Each Qty. List Price/Ea.
Uponor Residential Fire Sprinkler Systems ProPEX LF Brass Elbows make tight, 90-degree connections for Uponor AquaPEX tubing. ProPEX Brass Elbow Note: ProPEX Tool is required. ProPEX Rings sold separately. UL 1821-listed. Part No. Part Description Pkg. Qty. List Price/Ea. LF4710750 ProPEX LF Brass Elbow, ³⁄₄" PEX x ³⁄₄" PEX 25 $10.67 LF4711000 ProPEX LF Brass Elbow, 1" PEX x 1" PEX 10 $17.22 ProPEX LF Brass and Brass Tees make diverting connections for Uponor AquaPEX tubing.
Uponor Residential Fire Sprinkler Systems ProPEX LF Brass and Brass Male Threaded Adapters connect Uponor AquaPEX tubing to male NPT threads and are intended as transition fittings from metal to PEX. ProPEX Brass Male Threaded Adapter Note: ProPEX tool is required. ProPEX Rings sold separately. UL 1821-listed. Part No. Part Description LF4527575 ProPEX LF Brass Male Threaded Adapter, ³⁄₄" PEX x ³⁄₄" NPT List Price/Ea. 25 $9.24 25 $12.
Uponor Residential Fire Sprinkler Systems The Test Orifice is used with the In-line Flow Test Kit. Use the appropriate orifice, as sprinklers vary in orifice size. Test Orifice Note: Test orifices are color-coded for easy identification. Part No. Part Description Pkg. Qty. List Price/Ea. Q7500030 Q7500040 Test Orifice for F1/Res 30 Sprinkler, 3.0 K-factor, white 5 $27.50 Test Orifice for F1/Res 40 Sprinkler, 4.0 K-factor, gray 5 $27.50 Q7500043 Test Orifice for RFC 43 Sprinkler, 4.
PEX-a Plumbing Systems www.uponorpro.com 888.994.
Uponor PEX-a Plumbing Systems Pkjijm Gjbd^ Kgph]dib Ntno`h Uponor Logic Plumbing Systems vs.
Uponor PEX-a Plumbing Systems ProPEX Fittings Engineered Plastic (EP) Lead-free Brass (LF) Uponor offers a comprehensive line of engineered plastic (EP), lead-free (LF) brass, red brass, standard yellow brass and WIPEX DZR brass fittings to effectively meet any residential or commercial plumbing or radiant application.
Uponor PEX-a Plumbing Systems Uponor AquaPEX Tubing Uponor AquaPEX tubing is used in hot and cold potable-water distribution systems as well as AquaSAFE residential fire sprinkler systems. It is also suitable for use in hydronic heating and cooling applications where the system contains no ferrous corrodible components or where any ferrous corrodible components are isolated from the tubing.
Uponor PEX-a Plumbing Systems Part No. Part Description Pkg. Qty. List Price/Ea. F1930500 F1930750 ¹⁄₂" Uponor AquaPEX White, 20-ft. straight length, 500 ft. (25 per bundle) 1 $291.05 ³⁄₄" Uponor AquaPEX White, 20-ft. straight length, 300 ft. (15 per bundle) 1 F1921000 $333.25 1" Uponor AquaPEX White, 20-ft. straight length, 200 ft. (10 per bundle) 1 $379.08 F1921250 1¹⁄₄" Uponor AquaPEX White, 20-ft. straight length, 100 ft. (5 per bundle) 1 $366.
Uponor PEX-a Plumbing Systems Uponor AquaPEX Tubing Coil — Blue Uponor AquaPEX Tubing Straight Length — Blue P E X- a P l u m b i n g S y s t e m s Uponor AquaPEX Reclaimed Water Tubing — Purple 94 Pre-insulated Uponor AquaPEX Tubing Coil — White P E X- a P l u m b i n g S y s t e m s Part No. Part Description Coils/Pallet List Price/Ea. F3040500 F3060500 ¹⁄₂" Uponor AquaPEX Blue, 100-ft. coil 22 $58.21 ¹⁄₂" Uponor AquaPEX Blue, 300-ft. coil 18 $174.
Uponor PEX-a Plumbing Systems Part No. Part Description List Price/Ea. F6921250 Pre-insulated 1¹⁄₄" Uponor AquaPEX with ¹⁄₂" Insulation, 20-ft. straight length, 100 ft. (5 per bundle) $621.00 F6921500 Pre-insulated 1¹⁄₂" Uponor AquaPEX with ¹⁄₂" Insulation, 20-ft. straight length, 100 ft. (5 per bundle) $706.00 F6922000 Pre-insulated 2" Uponor AquaPEX with ¹⁄₂" Insulation, 20-ft. straight length, 100 ft. (5 per bundle) $1,205.
Uponor PEX-a Plumbing Systems EP Multi-port Tees EP Branch Multi-port Tee EP Branch Multi-port Tee features ³⁄₄" or 1" ProPEX inlet with ¹⁄₂" ProPEX branch outlets. The Multi-port Tee is made of EP, which is proven in demanding hot-water applications. Note: ProPEX Tool is required. ProPEX Rings sold separately. EP Flow-through Multi-port Tee Part No. Part Description Pkg. Qty. List Price/Ea. Q2237550 ³⁄₄" EP Branch Multi-port Tee, 3 outlets 10 $15.
Uponor PEX-a Plumbing Systems EP Branch Opposing-port Multi-port Tee features a ³⁄₄" ProPEX inlet with opposing ¹⁄₂" ProPEX branch outlets. These are designed for a central location to facilitate piping in two directions. The tee is made of EP, which is proven in demanding hot-water applications. EP Branch Opposing-port Multi-port Tee Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea.
Uponor PEX-a Plumbing Systems EP Branch Multi-port Elbow EP Branch Multi-port Elbow features an integrated ³⁄₄" or 1" ProPEX elbow inlet with ¹⁄₂" ProPEX branch outlets and mounting clips. The elbow is designed for commercial plumbing applications, and eliminates the need for multiple connections. The elbow is made of EP, which is proven in demanding hot-water applications. Note: ProPEX Tool is required. ProPEX Rings sold separately. EP Branch Multi-port Tee Part No.
Uponor PEX-a Plumbing Systems ProPEX Fittings ProPEX EP, LF Brass, Red Brass and Brass Couplings make PEX-to-PEX connections. ProPEX Coupling Note: ProPEX Tool is required. ProPEX Rings sold separately. Part Description Q4773838 ProPEX EP Coupling, ³⁄₈" PEX x ³⁄₈" PEX LF4543850 ProPEX LF Brass Coupling, ³⁄₈" PEX x ½" PEX Pkg. Qty. 25 List Price/Ea. $1.42 25 $8.93 V4543850 ProPEX Red Brass Coupling, ³⁄₈" PEX x ½" PEX 25 $5.05 Q4543850 ProPEX Red Brass Coupling, ³⁄₈" PEX x ½" PEX 25 $1.
Uponor PEX-a Plumbing Systems ProPEX LF Brass to Polyethylene (PE) Coupling transitions black PE tubing to Uponor AquaPEX tubing. Product does not include hose clamps for the PE side of the coupling. ProPEX LF Brass to Polyethylene (PE) Coupling Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description LF4591010 ProPEX LF Brass to PE Coupling, 1" PEX x 1" PE Pkg. Qty. List Price/Ea. 10 $25.
Uponor PEX-a Plumbing Systems ProPEX Drop Ear LF Brass and Brass Elbows provide rigid, 90-degree connections and the ability to secure Uponor AquaPEX tubing. ProPEX Drop Ear Brass Elbow Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Pkg. Qty. List Price/Ea. LF4235038 ProPEX Drop Ear LF Brass Elbow, ¹⁄₂" PEX x ³⁄₈" FIP 25 $15.70 LF4235050 ProPEX Drop Ear LF Brass Elbow, ¹⁄₂" PEX x ¹⁄₂" FIP 25 $13.17 25 $8.
Uponor PEX-a Plumbing Systems ProPEX EP, LF Brass and Brass Reducing Tees make diverting connections for Uponor AquaPEX tubing in supply and return mains. Branch size is listed last in the part description. ProPEX Reducing Tee Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Q4755575 ProPEX EP Reducing Tee, ¹⁄₂" PEX x ¹⁄₂" PEX x ³⁄₄" PEX 25 $7.56 ProPEX Brass Reducing Tee, ¹⁄₂" PEX x ¹⁄₂" PEX x ³⁄₄" PEX 25 $5.
Uponor PEX-a Plumbing Systems ProPEX Reducing Tee Part Description Pkg. Qty. List Price/Ea. Q4751517 ProPEX EP Reducing Tee, 1¹⁄₂" PEX x 1" PEX x ³⁄₄" PEX 10 $13.34 Q4751511 ProPEX EP Reducing Tee, 1¹⁄₂" PEX x 1" PEX x 1" PEX 10 $13.34 Q4751537 ProPEX EP Reducing Tee, 1¹⁄₂" PEX x 1¹⁄₄" PEX x ³⁄₄" PEX 10 $15.25 ProPEX DZR Brass Reducing Tee, 1¹⁄₂" PEX x 1¹⁄₄" PEX x ³⁄₄" PEX 10 $14.50 ProPEX EP Reducing Tee, 1¹⁄₂" PEX x 1¹⁄₄" PEX x 1" PEX 10 $15.
Uponor PEX-a Plumbing Systems ProPEX EP and Brass Plugs permanently or temporarily terminate the end of Uponor AquaPEX tubing. ProPEX Plug Note: ProPEX tool is required. ProPEX Rings sold separately. Part No. Part Description Q4533838 ProPEX Brass Plug for ³⁄₈" PEX 25 $1.15 Q4350500 ProPEX EP Plug for ¹⁄₂" PEX 25 $0.76 Q4350750 ProPEX EP Plug for ³⁄₄" PEX 25 $1.25 ProPEX Brass Plug for ³⁄₄" PEX 25 $1.35 Q4351000 ProPEX EP Plug for 1" PEX 10 $2.
Uponor PEX-a Plumbing Systems ProPEX EP, LF Brass and Brass Swivel Faucet Adapters (with plastic nut) connect ¹⁄₂" Uponor AquaPEX tubing to male NPSM faucet connections. ProPEX Swivel Faucet Adapter Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No.
Uponor PEX-a Plumbing Systems ProPEX Stainless Steel Male Threaded Adapters transition Uponor AquaPEX tubing to reverse osmosis units. Due to the aggressive nature of conditioned water produced by reverse osmosis, de-ionization and distillation, ProPEX Stainless Steel Fittings are manufactured from 316 stainless steel, and fully comply with CSA B137.5. ProPEX Stainless Steel Male Threaded Adapter Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty.
Uponor PEX-a Plumbing Systems Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description LF4513850 ProPEX LF Brass Sweat Adapter, ³⁄₈" PEX x ¹⁄₂" Copper Q4513850 ProPEX Brass Sweat Adapter, ³⁄₈" PEX x ¹⁄₂" Copper LF4515050 ProPEX LF Brass Adapter, ¹⁄₂" PEX x ¹⁄₂" Copper $3.35 25 $3.58 25 $10.66 ProPEX Brass Sweat Adapter, ¹⁄₂" PEX x ¹⁄₂" Copper 25 $3.10 25 $7.02 25 $4.99 25 $12.10 25 $6.53 25 $8.
Uponor PEX-a Plumbing Systems ProPEX LF Brass, Red Brass and Brass Fitting Adapters transition Uponor AquaPEX tubing to copper fittings. ProPEX Brass Fitting Adapters Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. LF4505050 ProPEX LF Brass Fitting Adapter, ¹⁄₂" PEX x ¹⁄₂" Copper V4505050 ProPEX Red Brass Fitting Adapter, ¹⁄₂" PEX x ¹⁄₂" Copper 25 $10.01 ProPEX Brass Fitting Adapter, ¹⁄₂" PEX x ¹⁄₂" Copper 25 $3.04 25 $7.62 25 $6.
Uponor PEX-a Plumbing Systems Valves and Accessories for point-of-use shutoff at the fixture. Both styles connect ¹⁄₂" Uponor AquaPEX tubing to ³⁄₈" O.D. risers. Uponor also offers ProPEX LF brass full-port, quarter-turn stop valves. They are chrome- plated and available in angle or straight configurations. Stop valves are used for point-of-use shutoff at the fixture. Both styles connect ¹⁄₂" Uponor AquaPEX tubing to ³⁄₈" O.D. risers. Angle Stop Valve is used for point-of-use shutoff at the fixture.
Uponor PEX-a Plumbing Systems Brass Compression Stop Valve Brass Compression (quarter-turn) Stop Valve is chrome-plated and available in angle or straightconfigurations. Stop valves are used for point-of-use shutoff at the fixture. Both styles connect ¹⁄₂" UponorAquaPEX tubing to ³⁄₈" o.d. risers. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea. 10 $17.12 10 $7.95 10 $20.58 Brass Compression Straight Stop Valve for ¹⁄₂" PEX 10 $7.
Uponor PEX-a Plumbing Systems ProPEX Escutcheon with flaired sleeve provides an attractive cover for ¹⁄₂" Uponor AquaPEX tubing and ProPEX connections as they exit the wall. Available in white or chrome-plated. Part No. Part Description F5650500 ProPEX Escutcheon for ¹⁄₂" PEX (¹¹⁄₁₆" O.D.), chrome-plated Pkg. Qty. 25 $9.87 F5670500 ProPEX Escutcheon for ¹⁄₂" PEX (¹¹⁄₁₆" O.D.), white 25 $2.73 List Price/Ea.
Uponor PEX-a Plumbing Systems ProPEX Brass to Copper Ball Valve ProPEX LF Brass to Copper (quarter-turn) Ball Valve features a shutoff valve for ¹⁄₂" and ³⁄₄" Uponor AquaPEX tubing to ¹⁄₂" and ³⁄₄" copper pipe. These valves are not compatible with applications using glycol. Note: ProPEX tool is required. ProPEX Rings sold separately. Part No. LF4803850 Q4803850 ProPEX LF Ball Valve (large bore), ³⁄₈" PEX x ¹⁄₂" Copper Adapter 10 $21.
Uponor PEX-a Plumbing Systems ProPEX Copper Stub Ell provides a 90-degree transition from Uponor AquaPEX tubing to copper or ¹⁄₂" compression valves. ProPEX Copper Stub Ell Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea. 25 $15.77 25 $10.76 LF2855050 ProPEX LF Copper Stub Ell, ¹⁄₂" PEX LF Brass x ¹⁄₂" Copper (13" x 8") 25 $22.89 LF2895050 ProPEX LF Copper Stub Ell, ¹⁄₂" PEX LF Brass x ¹⁄₂" Copper (8" x 13") 25 $23.
Uponor PEX-a Plumbing Systems ProPEX In-line Ice Maker Tee ProPEX In-line Ice Maker Tee, ¹⁄₂" PEX x ¹⁄₂" PEX, features ¹⁄₈" NPT x ¹⁄₄" O.D. compression. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea. 10 $58.17 P E X- a P l u m b i n g S y s t e m s LF4455050 ProPEX LF Brass In-line Ice Maker Tee, ¹⁄₂" PEX x ¹⁄₂" PEX x ¹⁄₄" O.D. compression 114 P E X- a P l u m b i n g S y s t e m s www.uponorpro.com 888.994.
Uponor PEX-a Plumbing Systems EP Valved Manifold and Accessories Available with three or four ProPEX outlets, the EP Valved Manifold is suitable for hot and cold potablewater distribution systems. The kit includes a manifold, red and blue valve clips, labels, valve-turning tool and installation instructions. Part No. Part Description Pkg. Qty. Q2110300 EP Valved Manifold Kit C, 3 outlets with ¹⁄₂" ProPEX 1 $91.35 Q2110400 EP Valved Manifold Kit D, 4 outlets with ¹⁄₂" ProPEX 1 $109.
Uponor PEX-a Plumbing Systems Copper Branch Manifolds ProPEX 1" (type L) Copper Branch Manifold ProPEX 1" Copper Branch Manifold features ¹⁄₂" outlets brazed to manifold trunk. Sweat manifolds together to create the desired number of outlets. Do not exceed acceptable flow rates for 1-inch nominal copper. Note: ProPEX Tool is required. ProPEX Rings sold separately. Part No. Part Description Pkg. Qty. List Price/Ea. LF2801050 ProPEX 1" Copper Branch Manifold with ¹⁄₂" ProPEX LF outlets, 4 outlets $515.
Uponor PEX-a Plumbing Systems ProPEX 1" Copper Valved Manifold features ¹⁄₂" ProPEX valve connections allowing for simple and easy isolation of individual loops. Sections can sweat together to extend the number of outlets using a standard 1" copper coupling. Both 1" ends are copper pipe size and require a copper end cap, coupling or transition fitting to make the proper system connection. Do not exceed accepted flow rates for 1-inch nominal copper.
Uponor PEX-a Plumbing Systems D'MAND® Hot Water Delivery System D’MAND® Hot Water Delivery System The D’MAND® Hot Water Delivery System is an integral part of the Uponor Logic plumbing layout, which is designed to maximize energy and water savings, minimize connections, and reduce hot-water delivery times. The D’MAND Hot Water Delivery System provides two different system pumps. Model 100 supports plumbing systems with the farthest fixture less than 100 feet from the pump location.
Tube Handling Tube Uncoilers Select Uncoiler Tu b e H a n d l i n g The Select Uncoiler facilitates the uncoiling of ⁵⁄₁₆" to 1" Uponor PEX or up to ⁵⁄₈" MLC tubing. The robust construction features an adjustable reel to allow for either horizontal or vertical position uncoiling. The durable wheels make for easy portability, and the uncoiler is equipped with a tubing-feed eyelet. Note: Due to large coil inside diameters, the Select Uncoiler cannot support 1,000' coils of ⁵⁄₈" and larger MLC tubing.
Tube Handling Tube Cutters Tu b e H a n d l i n g Tube Cutter Ratchet-style Tube Cutter 120 Tu b e H a n d l i n g Metal Tube Cutter cuts up to 1” PEX tubing. Plastic Tube Cutter cuts up to 1” PEX or ³⁄₄” MLC tubing. Part No. Part Description Each Qty. List Price/Ea. E6081125 Tube Cutter (metal) for up to 1" PEX 1 $43.19 E6081140 Tube Cutter Replacement Blade for E6081125, spare part 1 $15.65 E6081128 Tube Cutter (plastic) for up to 1" PEX (³⁄₄" MLC Tubing) 1 $37.
Tools and Accessories ProPEX Tools and Accessories The Milwaukee M12 ProPEX Expansion Tool offers continuous expansions for maximum install speed, has a compact, right-angle design for use in tight spaces, and features an auto-rotating head for convenient, single-handed operation for expanding ³⁄₈" to 1" tubing sizes. The kit includes the Milwaukee M12 ProPEX Expansion tool; two (2) M12 lithium-ion batteries; a 30-minute charger; ¹⁄₂", ³⁄₄" and 1" expansion heads; grease; and a carrying case.
Tools and Accessories ProPEX Auto Rotation Adapter Designed to use with all standard expander tools and standard expander heads (³⁄₈" to 1"), the ProPEX Auto Rotation Adapter eliminates the need to rotate the tubing when making ProPEX connections. Note: The ProPEX Auto Rotation Adapter is not compatible with the ProPEX 200 Battery Expander Tool or H-series Expander Heads. Part No. Q6323810 To o l s a n d A c c e s s o r i e s ProPEX Hand Expander Tool Kit ProPEX Auto Rotation Adapter Each Qty.
Tools and Accessories MLC Press Fitting Tools and Accessories The Mini-Press Battery Tool is an electro-hydraulic press fitting tool that makes fast, easy connections to ¹⁄₂" through 1" Uponor MLC tubing. The tool kit with jaws includes one battery, one charger and press jaws for ¹⁄₂", ⁵⁄₈", ³⁄₄" and 1" tubing. The tool kit without jaws includes two batteries and one charger. Part Description Each Qty. List Price/Ea. D6260000 Mini-Press Battery Tool Kit (no jaws) 1 $3,366.
Tools and Accessories MLC Tubing Bending Tool The MLC Tubing Bending Tool allows for more precise, tighter bending radius than manual bends. Part No. Part Description D6165010 MLC Tubing Bending Tool (up to 1" tubing) Each Qty. List Price/Ea. 1 $867.65 Other Tools To o l s a n d A c c e s s o r i e s Service Wrench 124 Quik Trak Installation Tool Kit To o l s a n d A c c e s s o r i e s Service Wrench features a lightweight, compact design.
Tubing Supports Tubing Supports Plastic Bend Support (glass-reinforced nylon) provides a rigid, 90-degree bend and sleeve for ³⁄₈", ¹⁄₂" and ³⁄₄" Uponor PEX tubing. The ¹⁄₂" bend support works with PEX Wall Support Bracket (A5750500). Part No. Part Description List Price/Ea. A5150375 ³⁄₈" Plastic Bend Support 25 $1.70 A5250500 ¹⁄₂" Plastic Bend Support 25 $2.03 A5150750 ³⁄₄" Plastic Bend Support 50 $3.
Tubing Supports Straight-through Support PEX Wall Support Bracket PEX Stand-up Bracket Straight-through Support (zinc-plated) provides rigid straight-through support for ¹⁄₂" Uponor AquaPEX tubing as it exits a floor. Part No. Part Description F5140500 ¹⁄₂" Metal Straight-through Support Pkg. Qty. 25 List Price/Ea. $8.64 PEX Wall Support Bracket provides rigid, straight-through support for ¹⁄₂" or ³⁄₄" Uponor AquaPEX tubing.
Fasteners and Fastener Tools Fasteners and Fastener Tools Plastic PEX Rail secures Uponor PEX tubing products to metal and wood-support structures. PEX Rail Note: Suitable fastening hardware is required (not included). Part No. Part Description Pkg. Qty. List Price/Ea. A5700500 ¹⁄₂" PEX Rail, 6.5 ft. 16 $8.17 A5700625 ⁵⁄₈" PEX Rail, 6.5 ft. 16 $9.70 A5700750 ³⁄₄" PEX Rail, 6.5 ft. 16 $13.
Fasteners and Fastener Tools Tube Clamp Tube Clamps secure ¹⁄₂" and ³⁄₄" Uponor PEX tubing products. Part No. Tubing Clip Plastic Mounting Bracket F a s t e n e r s a n d F a s t e n e r To o l s U-shaped Tube Fastener Each Qty. List Price/Ea. A7250500 Tube Clamp Suspension (¹⁄₂" PEX), 100/pkg. 1 $22.55 A7250750 Tube Clamp Suspension (³⁄₄" PEX), 50/pkg. 1 $11.45 A7350500 Tube Clamp Standard (¹⁄₂" PEX), 100/pkg. 1 $33.66 A7350750 Tube Clamp Standard (³⁄₄" PEX), 50/pkg. 1 $9.
Fasteners and Fastener Tools Use Fixing Wire Twister with Fixing Wire (A7031000). Part Description E6090005 Fixing Wire Twister Each Qty. 1 List Price/Ea. $7.90 Use Ratchet-style Fixing Wire Twister with Fixing Wire (A7031000). Part No. Part Description E6091700 Ratchet-style Fixing Wire Twister Each Qty. List Price/Ea. 1 $82.75 Specially formulated 6" galvanized steel alloy tie secures Uponor PEX tubing products to wire mesh or rebar. Use with Fixing Wire Twisters (E6090005 or E6091700).
Fasteners and Fastener Tools Pneumatic Stapler Kit Metal Staples Pneumatic Stapler Kit fires ⁵⁄₈" through 1¹⁄₄" staples with a 1" crown. Kit includes stapler, walking stick and conventional nose piece for attaching ¹⁄₂" and ⁵⁄₈" Uponor PEX to subfloors. Part No. Part Description E6021638 Pneumatic Stapler Kit Each Qty. 1 List Price/Ea. $2,389.45 Metal Staples are available in 1¹⁄₄" lengths with a 1" crown.
Uponor General Conditions 1. A Purchase Order, when accepted, is not subject to cancellation, change, reduction in amount or suspension of deliveries except with the written consent of UPONOR and upon terms which indemnify said company against loss. 2. Any change of design, delivery schedule or instructions of any kind must be submitted in writing.
Freight Policy LTL and Truckload Shipments Orders over $15,000 net will ship prepaid within 5 business days. Uponor will accept purchase orders from a maximum of four different branches to qualify for prepaid freight if the following conditions are met: •The orders must be received by Uponor at the same time. •Orders must ship on the same day. •Orders must specify that they are piggyback orders when they are placed and state which orders they will ship with.
UPONOR : conditions générales 1. Une fois accepté, un bon de commande ne peut pas faire l’objet d’annulation, de changement, de réduction du montant ou d’arrêt de livraison sans le consentement écrit d’UPONOR (la Société) et en vertu de modalités qui l’indemnisent de toute perte. 2. Tout changement relatif à la conception, l’horaire de livraison ou des directives de toutes sortes doit être soumis par écrit.
Politique de transport Envois chargement partiel et complets Toute commande de plus de 15 000 $ NET sera expédiée prépayée dans un délai de 5 jours ouvrables. UPONOR acceptera des bons de commande d’un maximum de quatre différentes succursales pour pouvoir obtenir le transport prépayé si les conditions suivantes sont respectées : •Les commandes doivent être reçues par UPONOR en même temps. •Les commandes doivent être expédiées le même jour.
New New New New New or Discont.
136 New New New New or Discont.
Disc. New or Discont.
138 New New or Discont.
Disc. New or Discont.
140 New Disc. Disc. New or Discont.
New New New New New New New New New Disc. Disc. New New or Discont.
New or Discont.
Disc. New or Discont.
144 New New New New New or Discont.
New New Disc. Disc. New New New or Discont.
146 Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. New New or Discont.
New New New New New New New or Discont.
148 Disc. Disc. Disc. New or Discont.
Disc. Disc. Disc. New or Discont.
150 Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. New or Discont.
Q4655050 Q4680625 Q4681250 Q4681500 Q4682000 Q4690302 Q4690503 Q4690504 Q4690512 Q4690753 Q4690754 Q4690756 Q4691000 Q4691003 Q4691004 Q4701010 Q4701150 Q4701175 Q4701751 Q4701775 Q4702000 Q4702051 Q4702053 Q4702055 Q4702210 Q4702213 Q4702215 Q4702275 Q4702575 Q4705575 Q4707710 Q4710625 Q4712000 Q4730500 Q4740500 Q4743850 Q4743855 Q4751010 Q4751150 Q4751175 Q4751311 Q4751313 Q4751317 Q4751331 Q4751337 Q4751511 Q4751515 Q4751517 Q4751531 Q4751533 Q4751537 Q4751551 Q4751553 Q4751557 Q4751751 Q4751775 Disc.
152 Disc. Disc. Disc. Disc. Disc. New NEW New or Discont.
Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. Disc. New or Discont.
154 Part Number Q7500043 Q7500044 Q7500049 Q7500100 Q7500200 Q7500300 Q7503000 Q7511050 Q7517550 Q7531050 Q7537550 Q7541050 Q7547550 Q7602000 Q7602001 Q8521010 Q8525050 Q8527575 V4505050 V4507575 V4511010 V4511313 V4511515 V4515050 V4517575 V4525050 V4527575 V4543850 New or Discont. New Test Orifice for RFC 43 Sprinkler, 4.3 K-factor, red Test Orifice for F1/Res 44 Sprinkler, 4.4 K-factor, blue Test Orifice for F1/Res 49 or RFC 49 Sprinkler, 4.
CA_Catalog_2011_03-11, Copyright © 2011 Uponor. Uponor Ltd. 2000 Argentia Rd., Plaza 1, Ste. 200 Mississauga, ON L5N 1W1 CANADA Tel: 888. 994.7726 Fax: 800.638.9517 Web: www.uponorpro.
