Submittal Sheet

ProPEX
®
Ball and Balancing Valve
Submittal Information
Revision B: Oct. 21, 2009
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Material: CA 360 Brass
Maximum Temperature (no pressure): 250°F (121°C)
Maximum Working Pressure: 250 psi (17 bar)
C
v
(Q5906375): 6.60
C
v
(Q5907575): 6.70
Product Information and Application Use
The Uponor ProPEX
®
Ball and Balance Valve products feature in-line
isolation valves.
1
9
Description
Part
Number
A B C D Weight
ProPEX Ball and Balancing Valve, ⅝" PEX x ¾" Copper Adapter Q5906375 4.50" 2.10" ⅝" PEX ¾" Copper 0.80 lbs.
ProPEX Ball and Balancing Valve, ¾" PEX x ¾" Copper Adapter Q5907575 4.50" 2.10" ¾" PEX ¾" Copper 0.80 lbs.
Installation
Install valve according to local building code. Do not dismantle. If soldering, aim flame away from fitting. Remove safety cap. Using Allen key or
hex wrench, fully close memory spindle by performing a complete clockwise turn and open it the required number of turns from the closed
position. For balancing of manifolds, open the memory spindle fully for the longest loop and balance the other loops by setting their memory
spindles according to their loop lengths relative to the longest loop. Refer to the Radiant Floor Installation Handbook for additional information.
Standards
ASTM F877; ASTM F1960
Codes
N/A
Listings
NSF-rfh
Related Applications Contact Information
PEX-a Plumbing Systems
Radiant Heating and Cooling Systems
Snow and Ice Melting Systems
Permafrost Protection Systems
Turf Conditioning Systems
Uponor, Inc.
5925 148th Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca
1
ProPEX
®
is a registered trademark of Uponor, Inc. ProPEX
™
is a trademark of Uponor Ltd.