Submittal Sheet

ProPEX
®
Engineered Plastic (EP) Tee
Submittal Information
Revision B: Sept. 18, 2008
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Material: UDEL
®
Polysulfone, 20% Glass-reinforced (½" to 1")
Acudel
®
Modified Polyphenylsulfone (1¼" to 1½")
Radel
®
Polyphenylsulfone (2")
Maximum Temperature
(no pressure): 320°F (160°C)
Maximum Working
Temperature/Pressure: 210°F (99°C) at 150 psi
Product Information and Application Use
ProPEX
®
Engineered Plastic (EP) Tee makes diverting connections for Uponor
PEX tubing in supply and return mains.
1
Note: Branch size is listed last in the following part descriptions.
9
Description Part Number A B Weight
ProPEX EP Tee, ½" PEX x ½" PEX x ½" PEX
ProPEX EP Tee, ¾" PEX x ¾" PEX x ¾" PEX
ProPEX EP Tee, 1" PEX x 1" PEX x 1" PEX
ProPEX EP Tee, 1¼" PEX x 1¼" PEX x 1¼" PEX
ProPEX EP Tee, 1½" PEX x 1½" PEX x 1½" PEX
ProPEX EP Tee, 2" PEX x 2" PEX x 2" PEX
Q4755050
Q4757575
Q4751010
Q4751313
Q4751515
Q4752000
2.50"
3.30"
4.10"
4.80"
5.80"
7.45"
1.53"
1.94"
2.47"
3.22"
3.82"
4.79"
0.02 lbs.
0.05 lbs.
0.07 lbs.
0.15 lbs.
0.25 lbs.
0.38 lbs.
Installation
Use the appropriate ProPEX Ring for PEX tubing. Refer to the AQUAPEX
®
Professional Plumbing Installation Handbook or Uponor Radiant
Installation Handbook for additional information.
Standards
CAN/CSA B137.5; ASTM F877; ASTM F1960
Codes
IPC; UPC; NSPC; NPC of Canada
Listings
IAPMO 3558; ANSI/NSF 14- and 61-certified; HUD MR 1269; ICC ESR 1099
Related Applications Contact Information
PEX-a Plumbing Systems
Radiant Heating and Cooling Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Road, Plaza 1, Suite 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca
1
ProPEX
®
is a registered trademark of Uponor, Inc. ProPEX™ is a trademark of Uponor Ltd.