Submittal Sheet

ProPEX
®
EP Plug
Submittal Information
Revision A: Feb. 27, 2009
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Material:
UDEL Polysulfone, 20% Glass-reinforced
(½" - 1"); Acudel Polysulfone (1¼" - 2")
Maximum Temperature
(no pressure): 320°F (160°C)
Maximum Working
Temperature/Pressure: 210°F (99°C) at 150 psi
Product Information and Application Use
ProPEX
®
EP Plugs are available for use in hot and cold domestic potable
water systems.
1
Plugs are also approved for use in any hydronic
heating system. ProPEX EP Plugs temporarily or permanently terminate
Uponor PEX tubing ends.
9
Description
Part
Number
A B Weight
ProPEX EP Plug for ½" PEX
ProPEX EP Plug for ¾" PEX
ProPEX EP Plug for 1" PEX
ProPEX EP Plug for 1¼" PEX
ProPEX EP Plug for 1½" PEX
ProPEX EP Plug for 2" PEX
Q4350500
Q4350750
Q4351000
Q4351250
Q4351500
Q4352000
0.850"
0.850"
1.08"
1.32"
2.00"
2.40"
0.836"
0.836"
1.187"
1.35"
2.125"
2.625"
0.006 lbs.
0.008 lbs.
0.020 lbs.
0.040 lbs.
0.075 lbs.
0.156 lbs.
Installation
Use the appropriate ProPEX Ring for PEX tubing. Refer to the AquaPEX
®
Professional Plumbing Installation Handbook or Uponor Radiant
Installation Handbook for additional information.
Standards
CAN/CSA B137.5; ASTM F877; ASTM F1960
Codes
IPC; UPC; NSPC; NPC of Canada
Listings
IAPMO 3558; ANSI/NSF 14- and 61-certified; HUD MR 1269; ICC ESR 1099
Related Applications Contact Information
PEX-a Plumbing Systems
Radiant Heating and Cooling Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca
1
ProPEX
®
is a registered trademark of Uponor, Inc. ProPEX
™
is a trademark of Uponor Ltd.