Install Instructions

www.uponorpro.com
16
1. Square cut the PEX tubing
perpendicular to the length
of the tubing. Remove all
excess material or burrs
that might affect the
fitting connection.
2. Slide the ProPEX Ring
over the end of the tubing
until it reaches the stop
edge. If using a ProPEX
Ring without a stop edge,
extend the ring over the
end of the tubing no more
than
1
⁄16" (1mm).
1
3
4
5a
2
3. Slide the expander head into the tubing until it
stops. Full expansions are necessary to make a
proper connection.
4. Press the trigger to expand the tubing.
Making ProPEX Connections
with the ProPEX 201 Corded
Expander Tool