User Guide

ManualsBrandsUponor ManualsHeating Supplies3/4" ProPEX Full Port Stop and Drain Ball Valve, 0.44" Bore (Lead Free)

28 l uponorengineering.com

Assembly

types

Manufacturer

3M™ Hilti

RectorSeal

STI HOLDRITE

Wall Floor/clg Wall Floor/clg Wall Floor/clg Wall Floor/clg Floor/clg

Concrete assemblies

1-hour C-AJ-2605 C-AJ-2605

2-hour

C-AJ-2510 C-AJ-2510 C-AJ-2170 C-AJ-2170 W-J-2162 C-AJ-2628 W-J-2021 C-AJ-2031 F-A-2188

C-AJ-2536 C-AJ-2536 C-AJ-2407 C-AJ-2407 W-J-2122 F-A-2171 W-J-2043 C-AJ-2140 F-A-2221

PHV-120-04 F-A-2115 C-AJ-2647 C-AJ-2647 W-J-2180 C-AJ-2701 W-J-2076 C-AJ-2291 F-B-2042

PHV-120-11 PH-120-10 W-J-2207 C-AJ-2674 W-J-2025 C-AJ-2176 W-J-2077 F-A-2186 F-A-2269

C-AJ-2213 PHV-120-04 W-J-2229 F-B-2040 C-AJ-2628 F-A-2235 W-J-2232 F-A-2224 F-A-2222

C-AJ-2378 PHV-120-11 W-J-2206 F-B-2041 C-AJ-2679 F-A-2237 W-J-2233 F-A-2225 F-A-2037

W-J-2231 C-AJ-2076 W-J-5122 F-A-2142 C-AJ-2701 C-AJ-2494 W-J-5148 C-AJ-2586

W-J-2110 C-AJ-2213 W-J-2071 W-J-2295 C-AJ-2679 C-AJ-2586 C-AJ-5345

C-AJ-2213 C-AJ-2378 W-J-2296 C-AJ-2702 C-AJ-5345 C-BJ-2046

C-AJ-2378 C-AJ-2213 C-AJ-2702 C-BJ-2046

C-AJ-2738 C-AJ-2378 C-AJ-2176 W-J-2291

PHV-120-12 C-AJ-2738 C-AJ-2494

C-AJ-2698 PHV-120-12 W-J-2035

C-AJ-2698 W-J-2051

W-J-2142

W-J-2197

W-J-2220

W-J-2222

W-J-2224

W-J-2266

3-hour

C-BJ-2028 C-BJ-2028 C-AJ-2119 C-AJ-2119 C-AJ-2671 C-AJ-2671 F-A-2176

C-BJ-2040 C-BJ-2040 C-AJ-2194 C-AJ-2194 C-AJ-5344 C-AJ-5344 F-A-2221

C-BJ-2041 C-BJ-2041 C-AJ-2622 C-AJ-2622 C-AJ-5346 C-AJ-5346 F-B-2042

C-AJ-2578 F-A-2269

F-A-2203 F-A-8034

F-A-2204 F-A-2222

Cast-in-place sleeves

Several manufacturers offer cast-in-place sleeves, which provide

oor/ceiling penetrations in concrete slab applications. Some

manufactures include:

• Holdrite

HydroFlame

• ProSet Systems • Hilti

Refer to the respective manufacturer’s website for detailed

product information.

Figure 3-17: Cast-in-place sleeves

Table 3-2b: Fire assemblies per manufacturer

Note: This table is not meant to address every compatible re assembly or restop manufacturer. It is the end user’s responsibility

to ensure that the re assembly documentation being used is approved and current for the specic application. Please refer to the

respective manufacturer’s website for detailed listing information.

ASTM E814 and CAN/ULC-S115 listings

= ASTM E814 and CAN/ULC-S115 = ASTM E814 only