Submittal Sheet

1
ProPEX
®
is a registered trademark of Uponor, Inc. ProPEX
™
is a trademark of Uponor Ltd.;
2
Visit listing agency’s website for complete
information;
3
For ½", ¾", 1", 1¼", 1½" and 2" pipe only;
4
For ¾" pipe and larger;
5
See listings/standards for un-insulated Uponor AquaPEX.
Pre-insulated Uponor AquaPEX
®
(ASHRAE 90.1-2013)
Submittal Information
Revision A: June 19, 2015
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Service Pipe:
Crosslinked polyethylene PEX-a Engel method pipe
encased in polyethylene-foam insulation; PEX 5106
Insulation:
Polyethylene foam
Thermal Conductivity:
0.25 Btu.in/sq.ft.h.degF
Operating Condition Limits:
(hydrostatic ratings)
200°F (93°C) at 80 psi (551 kPa)
180°F (82°C) at 100 psi (689 kPa)
73.4°F (23°C) at 160 psi (1,103 kPa)
½"-2" Uponor AquaPEX
®
White only:
120°F (49°C) at 130 psi (896 kPa)
Linear Expansion Rate:
1.10"/10°F/100' (27.94mm/5.56°C/30.48m)
Product Information and Application Use
Pre-insulated Uponor AquaPEX
®
(ASHRAE 90.1-2013) features flexible PEX pipe
encased in polyethylene-foam insulation to insulate potable-water lines and meet
ASHRAE 90.1-2013 energy-code requirements. The product is approved for use in hot
and cold domestic potable water systems, residential fire safety and hydronic heating
and cooling systems containing no ferrous corrodible components or where ferrous
components are isolated from the piping. The product is also approved for direct burial
in soil provided it is not exposed to groundwater. Uponor recommends adding ½" of
insulation to accommodate for foam compression in direct-burial applications.

Description
Part
Number
O.D.
Heat Loss
(at 70° Delta T)
R-Value
Coil Size
(O.D. x Width)
Weight
(lb./coil)
½" Pre-insulated Uponor AquaPEX with 1" insulation, 100-ft.
coil
F6150500
2.59"
6.3 BTU/hr/ft
7.5
45" x 9"
11.0 lbs.
¾" Pre-insulated Uponor AquaPEX with 1" insulation, 100-ft.
F6150750
3.08"
7.1 BTU/hr/ft
7.9
43" x 13.5"
22.0 lbs.
1" Pre-insulated AquaPEX with 1" insulation, 100-ft. coil
F6151000
3.09"
8.8 BTU/hr/ft
6.4
45" x 13.5"
30.2 lbs.
1¼" Pre-insulated AquaPEX with 1" insulation, 100-ft. coil
F6151250
3.34"
10.0 BTU/hr/ft
6.1
52" x 9"
39.2 lbs.
1½" Pre-insulated AquaPEX with 1½" insulation, 75-ft. coil
F6161500
4.93"
7.0 BTU/hr/ft
11.2
54" x 13.5"
49.5 lbs.
2" Pre-insulated AquaPEX with 1½" insulation, 75-ft. coil
F6162000
5.27"
8.6 BTU/hr/ft
9.9
58" x 13.5"
74.3 lbs.
Installation
Approved fitting system is ProPEX
®
.
1
Refer to the Uponor AquaPEX Professional Plumbing Installation Guide, AquaSAFE™ Residential Fire Sprinkler
Installation Guide or Uponor Radiant Installation Handbook for additional information.
Listings
2
cNSFus-fs
3
; cNSFus-pw; cQAIus
5
; UL; CSA; WH
5
; ETL
5
; PPI TR-4; ICC-ES; IAPMO; BMEC; CCMC
Codes
ICC; IPC; IMC; IRC; UPC; UMC; NSPC; HUD; UFGS; NPC of Canada; NBC of Canada
Standards
ANSI/NSF 14; ANSI/NSF 61; ASTM F876; ASTM F877; ASTM F1960; ASTM F2023; ASTM E119/UL 263; CAN/ULC S101; ASTM E814/ULC S115; AWWA
C904
4
; CSA B137.5; CSA B214; UL 1821
3
; ULC/ORD-C199P
3
Related Applications
Contact Information
Uponor Plumbing Systems
AquaSAFE Fire Safety Systems
Radiant Heating and Cooling Systems
Hydronic Piping Systems
Uponor, Inc.
5925 148th Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
www.uponorengineering.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
www.uponorengineering.com