Submittal Sheet

Pre-insulated AquaPEX
®
Tubing, coiled
Submittal Information
Revision A: Feb. 27, 2009
Project Information
Job Name:
Location: Part No. Ordered:
Engineer: Date Submitted:
Contractor: Submitted By:
Manufacturer’s Representative: Approved By:
Technical Data
Service Pipe: PEX-a tubing encased in ½" PEX-foam
insulation
Insulation: Multi-layered Closed Cell Cross-linked
Polyethylene Foam
Thermal Conductivity: 0.250 Btu.in/sqft.h.degF
Operating Condition
Limits:
(hydrostatic ratings)
200°F (93°C) at 80 psi
180°F (82°C) at 100 psi
73.4°F (23°C) at 160 psi
Linear Expansion Rate: 1.10"/10°F (12°C)/100'
Product Information and Application Use
Pre-insulated AquaPEX
®
tubing offers all the benefits of AquaPEX —
durable, flexible, corrosion-resistant — but encased in ½" PEX-foam
insulation for the additional benefit of insulating potable-water lines and
meeting national, state and local energy codes. Available in ½" to 2" sizes.
9
Description
Part
Number
O.D.
Heat Loss
(at 70° Delta T)
R-Value
Coil Size
(OD x Width)
Weight
(lb./coil)
½" Pre-insulated AquaPEX, 100'
F6040500 1.74" 6.1 BTU/h/ft
2
4.8 32.38" x 12.4" 8.6 lbs.
¾" Pre-insulated AquaPEX, 100'
F6040750 2.00" 8.0 BTU/h/ft
2
4.3 32.38" x 12.4" 12.8 lbs.
1" Pre-insulated AquaPEX, 100'
F6041000 2.27" 9.7 BTU/h/ft
2
4.0 34.50" x 13.75" 20.5 lbs.
Installation
See your Uponor representative for installation details. Refer to the Professional Plumbing Installation Guide for additional information.
Standards
CSA B137.5; ASTM F876; ASTM F877; ASTM2023; ASTM F1960; ASTM F2080; ANSI/NSF Standard 14; ANSI/NSF Standard 61
Codes
IPC; UPC; NSPC, NPC of Canada
Listings
IAPMO; NSF, ITS, HUD, UL
Related Applications Contact Information
Uponor Plumbing Systems
Radiant Heating and Cooling System
AQUASAFE
®
Fire Safety Systems
Uponor, Inc.
5925 148
th
Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponor-usa.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponor.ca