Submittal Sheet
1
ProPEX
®
is a registered trademark of Uponor, Inc. ProPEX
™
is a trademark of Uponor Ltd.;
2
Visit listing agency’s website for complete
information;
3
For ½", ¾", 1", 1¼", 1½" and 2" tubing only;
4
For ¾" tubing and larger;
5
See listings/standards for un-insulated Uponor AquaPEX.
Pre-insulated Uponor AquaPEX
®
with ½" Insulation, Coils
Submittal Information
Revision H: May 19, 2015
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Service Pipe:
Crosslinked polyethylene PEX-a Engel method tubing
encased in ½" PEX-foam insulation; PEX 5106
Insulation:
Multi-layered, closed-cell, crosslinked polyethylene foam
Thermal Conductivity:
0.250 Btu.in/sq.ft.h.degF
Operating Condition Limits:
(hydrostatic ratings)
200°F (93°C) at 80 psi (551 kPa)
180°F (82°C) at 100 psi (689 kPa)
73.4°F (23°C) at 160 psi (1,103 kPa)
½"-2" Uponor AquaPEX
®
White only:
120°F (49°C) at 130 psi (896 kPa)
Linear Expansion Rate:
1.10"/10°F/100' (27.94mm/5.56°C/30.48m)
Product Information and Application Use
Pre-insulated Uponor AquaPEX
®
tubing offers all the benefits of Uponor AquaPEX
(durable, flexible, corrosion-resistant) but encased in ½" PEX-foam insulation to
insulate potable water lines and meet national, state and local energy codes. The
tubing is approved for use in hot and cold domestic potable water systems, residential
fire safety and hydronic radiant heating and cooling systems containing no ferrous
corrodible components or where ferrous components are isolated from the tubing. This
product is not intended for direct-burial applications in soil or concrete.
Description
Part
Number
O.D.
Heat Loss
(at 70° Delta T)
R-Value
Coil Size
(O.D. x Width)
Weight
(lb./coil)
½" Pre-insulated AquaPEX with ½" insulation, 100-ft. coil
F6040500
1.81"
7.4 BTU/hr/ft
3.9
32.38" x 12.40"
8.0 lbs.
¾" Pre-insulated AquaPEX with ½" insulation, 100-ft. coil
F6040750
2.06"
9.0 BTU/hr/ft
3.6
32.38" x 12.40"
12.8 lbs.
1" Pre-insulated AquaPEX with ½" insulation, 100-ft. coil
F6041000
2.31"
10.6 BTU/hr/ft
3.4
57.00" x 10.00"
21.0 lbs.
1¼" Pre-insulated AquaPEX with ½" insulation, 100-ft. coil
F6041250
2.56"
12.1 BTU/hr/ft
3.3
59.00" x 10.00"
30.0 lbs.
1½" Pre-insulated AquaPEX with ½" insulation, 100-ft. coil
F6041500
2.81"
13.6 BTU/hr/ft
3.2
59.00" x 10.00"
42.0 lbs.
2" Pre-insulated AquaPEX with ½" insulation, 100-ft. coil
F6042000
3.31"
16.5 BTU/hr/ft
3.1
64.00" x 11.00"
65.0 lbs.
Installation
Approved fitting system is ProPEX
®
.
1
The product is not intended for direct-burial applications in soil or concrete. Refer to the Uponor AquaPEX
Professional Plumbing Installation Guide, AquaSAFE™ Residential Fire Sprinkler Installation Guide or Uponor Radiant Installation Handbook for
additional information.
Listings
2
cNSFus-fs
3
; cNSFus-pw; cQAIus
5
; UL; CSA; WH
5
; ETL
5
; PPI TR-4; ICC-ES; IAPMO; BMEC; CCMC
Codes
ICC; IPC; IMC; IRC; UPC; UMC; NSPC; HUD; UFGS; NPC of Canada; NBC of Canada
Standards
ANSI/NSF 14; ANSI/NSF 61; ASTM F876; ASTM F877; ASTM F1960; ASTM F2023; ASTM E84
5
; CAN/ULC S102.2
5
; ASTM E119/UL 263; CAN/ULC
S101; ASTM E814/ULC S115; AWWA C904
4
; CSA B137.5; CSA B214; UL 1821
3
; ULC/ORD-C199P
3
Related Applications
Contact Information
Uponor Plumbing Systems
Radiant Heating and Cooling Systems
AquaSAFE™ Fire Safety Systems
Hydronic Piping Systems
Uponor, Inc.
5925 148th Street West
Apple Valley, MN 55124 USA
Phone: 800.321.4739
Fax: 952.891.2008
www.uponorpro.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: 888.994.7726
Fax: 800.638.9517
www.uponorpro.com