Installation guide

Uponor Climate Co˘ntrol™ Zoning System Installation Guide
41
Section 11
System Maintenance
Regular system component checks are recommended
to optimize performance. This system requires no
maintenance, but check system status regularly.
Thermostat Batteries
The thermostats are powered by batteries. Replace the
batteries of the thermostat when the symbol
appears.
Base Unit
The Power LED of the Base Unit is always lit. When it
blinks, this means that an alarm has been triggered.
Open the controller cover. The LED of the channel from
which the alarm originated is blinking rapidly. See Section
11: Troubleshooting.
Automatic Exercise Function
The system is tted with an automatic exercise function.
Pump and actuators run every six days to prevent them
from seizing.
If system is tted with an interface, the exercise
function may be activated at any time.
Cleaning the Zoning System
Use a dry soft cloth to clean the Zoning System
and its components.
Interface Maintenance
• Check for alarms.
• Check the Information Menu every six months.
• Use a dry soft cloth to clean the Zoning System and
all its components.
Disposal of the Product
The Zoning System is made up of various recyclable
components. Dispose of them properly.
STOP