Installation guide

www.uponor-usa.com • www.uponor.ca
28
Interface Screens
Uponor Screen
• Pressing any button activates backlighting.
• To go to the main menu, press OK.
Uponor Screen Icons
Vacation mode is activated.
An alarm/error message is present.
The outdoor temperature is displayed if the system is
tted with an outdoor temperature sensor.
The Interface menu displays indoor temperature; it will
also display outdoor temperature if the system is tted
with an outdoor temperature sensor.
Main Menu
1. Upper banner: Menu heading
2. Information zone: The selected line is highlighted.
3. Scroll bar
How to Access and Navigate the Menu
Uponor
14 Jun 2008 2 : 00
1. > Press OK.
Vacation Mode
Settings
Information
Main Menu
2. > Information > Press OK.
Alarms
System
Rooms
Information
3. > Rooms > Press OK.
1.07 Gym
1.02 Living
Room List
4. > Select the desired room.
> Press OK.
• Display the desired information using the navigation
keys. Use
and to display the previous/next
screen. Use
and to display the previous/next
thermostat.
• To go back to the room list, press OK.
Access Level
This parameter allows the user to set or select the
access level. Two levels are available: basic or advanced.
The basic level allows the user to view some
basic information, but not modify the settings.
Recommended for use in a public location or a
rented accommodation, such as a hotel room.
The advanced level allows users to
modify settings.
1.
> Uponor screen > Main Menu > Settings > System
Parameters
> Access Level selection
Advanced
Basic
Access Level
2. > Basic or Advanced
> Press OK.
To switch from Basic to Advanced Level:
On the Uponor screen, simultaneously press
and
for 10 seconds.
Screen Advanced and OK appears. Press OK to put the
system is in Advanced mode.
Uponor
14 Jun 2008 2 : 00
Uponor
10 Nov 2008 5 : 19
Outdoor 32°F
Uponor
20 Nov 2008 5 : 19
Outdoor 32°F
Indoor Average 70.16°F
Vacation Mode
Settings
2
3
1
Information
Main Menu