Installation guide

www.uponor-usa.com • www.uponor.ca
22
Connecting Base Unit Power Source and Selecting
Programming Language
1. Check that the wiring is complete.
2. Ensure power compartment is closed.
3. Connect base units #2 and #3 to the power.
4. Check that the language data stick is connected at the
back of the interface.
5. Ensure power compartment is closed. Connect base
unit #1 to the power.
6. Select a language by pressing the
or keys to
select the language.
7. Press OK to conrm.
• If the language data stick is inserted, the
language screen will automatically appear at
rst installation.
• The language setting is saved in case of
power failure.
• The language can be changed after rst
installation by re-inserting the language stick.
Time and Date Setup
This screen will open automatically when the language
has been set.
Select time and date with the keys.
1. Select hours.
2. Set the hour.
3. Select minutes.
4. Set the minutes and continue until the date is set.
5. Press OK to conrm.
Svenska / Sedish
German / Deutsch
English
Language
12 : 24
Set Date/Time
01 Jan 2008
12 : 24
2010
2009
2008
2007
2006
26
25
24
23
22
02
01
00
59
58
02
01
00
23
22
14
13
12
11
10
Set Date/Time
01 Jan 2008
12 : 00
Set Date/Time
01 Jan 2008
00 : 00
Set Date/Time
01 Jan 2008
12 : 00
Set Date/Time
01 Jan 2008
Uponor
17 Mar 2008 12 : 24
00 : 00
Set Date/Time
01 Jan 2008