Overview of Primary Product

The Uponor PEX Foam Stapler (E6025000) fastens
Uponor PEX tubing to rigid foam insulation using
Uponor’s Plastic Foam Staples (A7015050 and
A7015075). The staples are compatible with
3
⁄
8
" through
3
⁄
4
" Uponor PEX tubing.
Stapler Features
• The upright stapler allows the user to stand, minimizing
strain from repetitive bending and kneeling.
• A visual staple window allows the user to view the level of
staples to know when to reload.
• A window on the front of the stapler allows access to
quickly and easily remove jammed staples.
• A convenient kickstand allows the stapler to stand upright
when not in use.
Assembly
1. Grasp the small, open end of the kickstand and insert
one end at a time into the kickstand mounting bracket.
2. Attach the plastic retaining U-clip connection onto the
top of the kickstand.
3. Flip the retaining clip over and snap onto the other
side of the kickstand.
CAUTION: The kickstand is intended only to
stand the stapler upright. Do not lean or apply
significant pressure to the kickstand. This can
deform or break the kickstand mounting bracket.
RADIANT HEATING AND
COOLING SYSTEMS
PEX FOAM STAPLER
INSTRUCTION SHEET
Figure 1: Uponor PEX Foam Stapler
Uponor PEX
Foam Stapler Instruction Sheet