Install Instructions

11
10
www.uponorpro.com
Fast Trak™ Installation Guide
11
5. Snap the tubing into the panels using gentle pressure with
your foot. Lay the tubing from the outer wall(s) towards the
inner wall(s) and mark the tubing for easy identification when
connecting to the manifold.
Note: Minimum bend radius for
3
⁄8" Wirsbo hePEX tubing in the Fast Trak
1.3i panel is 3" (75mm); ½" tubing is 3½" (88mm).
r
Minimum bend radius for
3
⁄8" tubing is 3" (75mm);
½" tubing is 3½" (88mm).
Figure 15: Install Tubing